THANK YOU! 😃😃😃 A deer shattered the cover on my driver side assembly a while back, and recently the low beam on the other side went out. I bought a set of bulbs for $40, so I could see, and since there's no room to get to the bulbs without moving things, I decided to order an assembly for the other side. That assembly costs less than the combination of bulbs in it, so I ordered the other side too! Before they arrived I watched your video. When I picked them up, they asked if I had someone to install them. I said no, "I'm going to take the car apart myself, starting with the back bumper." LOL It went GREAT! My assemblies had plastic nuts to adjust position, and my car, which was in an accident before I bought it in 2012, had a couple different attachments. Your video was excellent, just what I needed to have the confidence for the job! Best of all my 2010 car looks fantastic now, maybe better than when I bought it almost eleven years ago. THANK YOU!!!! Grandma P 😃😃😃
Tool list: 7mm socket, 10mm socket, T27 bit, flathead screwdriver (pry tool) and a box tilt bumper onto. Pliers for outer plug retention clip if can’t get a good grip. Thank you for the vid. Surely saved me time. Last set I did was on girlfriend’s 72 VW Campermobile taking 3 minutes as I had a pull off beer between lights :)
Just changed both headlamp assemblies on my 2005 Converible. Hardest part was getting the bumper back on. 1 hour start to putting the tools back. Thanks Brah!!!
Thanks so much! The front end of the Sebring is a gat danged puzzlebox and this video made it easy to get into. Took me 30 minutes to replace both sides, but I just replaced the low beam bulbs.
Hi Martin and thanks for that video. I just purchased a 2009 Chrysler HT/Conv. Limited with the big engine (3.5 L EGF V6 (gasoline). I was wondering if you know if there is a "SHOP" manual and SERVICE manual available for my car? Also which headlights did you order (there seems to be several choices) available. Lastly is there a Club for HT/Conv top Sebrings (there is one for Convertible) but they are quite a bit different. Thanks again for your post and I hope to see more on Chrysler Sebrings.
Can i remove the middle grill or middle piece off the old bumper and put it on the new 1.Just incase the new bumper I'm ordering don't come with a middle piece.I'm not shure if the middle piece has to be on the bumper ??
Holy Moly. All that to replace a flippin' headlight? My old 2000 Ford Mustang required you to pull two simple locking bars from the back of the headlight and you could then manuver the entire light to replace bulbs or replace the entire headlight assembly. Push the bars back in, good to go. It took six seconds in your driveway, no tools needed. This? This is purposely engineered B.S. Wow. I only watched this because a friend bought a Sebring recently with yellowed headlights. After seeing this, I'm just going to try restoring them with sandpaper and toothpaste instead. Either that or have a mechanic charge me two hours of labor on top of the charge for the headlights themselves! I ain't got time for all that.
LMFAO i was cracking up on that! All seriousness though he got lucky most of these cars blow a bulb it trips a code and still won't work you got to. Clear it..i know stupid
The video is good but the car design is shit. I never needed to look for a video on how to change a headlight bulb, but then I never had to remove the bumper to do that either. What a freakin puzzle this car is, and the battery replacement is not any easier
We need a Chrysler sebring 2007 manual transmission that's what usa needs to bring to America. Day have manual but different country with engine 2.0l crd
Most modern cars that have plastic bumpers are the same whatever the brand ,they dont design them to be fixed anymore ,,they build em to last just after the warranty expires then you get a new one or get nickle and dimed to death ,, headlights fog over the clearcoat peels they start to rust real bad all right about the same time.
it's actually a result of some of that fine German engineering Then Gen 3 sebrings were a result of the disaster of the Mercedes Benz / Chrysler debacle it has a good exterior design but some crazy internal designs
THANK YOU! 😃😃😃
A deer shattered the cover on my driver side assembly a while back, and recently the low beam on the other side went out. I bought a set of bulbs for $40, so I could see, and since there's no room to get to the bulbs without moving things, I decided to order an assembly for the other side.
That assembly costs less than the combination of bulbs in it, so I ordered the other side too! Before they arrived I watched your video. When I picked them up, they asked if I had someone to install them. I said no, "I'm going to take the car apart myself, starting with the back bumper." LOL
It went GREAT! My assemblies had plastic nuts to adjust position, and my car, which was in an accident before I bought it in 2012, had a couple different attachments.
Your video was excellent, just what I needed to have the confidence for the job!
Best of all my 2010 car looks fantastic now, maybe better than when I bought it almost eleven years ago.
THANK YOU!!!! Grandma P 😃😃😃
Tool list: 7mm socket, 10mm socket, T27 bit, flathead screwdriver (pry tool) and a box tilt bumper onto. Pliers for outer plug retention clip if can’t get a good grip.
Thank you for the vid. Surely saved me time. Last set I did was on girlfriend’s 72 VW Campermobile taking 3 minutes as I had a pull off beer between lights :)
Just changed both headlamp assemblies on my 2005 Converible. Hardest part was getting the bumper back on. 1 hour start to putting the tools back. Thanks Brah!!!
Thanks so much! The front end of the Sebring is a gat danged puzzlebox and this video made it easy to get into. Took me 30 minutes to replace both sides, but I just replaced the low beam bulbs.
Chrysler Sebring the worst car design ever head lights and battery should the easiest things to replace.
Nope it’s the most hardest thing in the world and you Gotta be careful your break little pieces, I “HATE working on my Seabring
Bruh this is too much to just take headlight cover out fr. I'm in my yard right now scratching my head 🤣
Well that explains a lot . Never in million years would I ...
Thank you 😇
Have a question. On your revisor tank, I see there’s a metal radiator cap. On mine I have a plastic. Did you upgrade yours or something?
Hi Martin and thanks for that video. I just purchased a 2009 Chrysler HT/Conv. Limited with the big engine (3.5 L EGF V6 (gasoline). I was wondering if you know if there is a "SHOP" manual and SERVICE manual available for my car? Also which headlights did you order (there seems to be several choices) available. Lastly is there a Club for HT/Conv top Sebrings (there is one for Convertible) but they are quite a bit different. Thanks again for your post and I hope to see more on Chrysler Sebrings.
Is this how you replace bulb?
No. It is how to replace the headlight assembly.
I will try this. I just bought a 2008 Sebring Conv and I'm replacing the old headlights with new Halogen/Chrome style :)
Prince Frog - The head lights shouldn’t be too difficult to replace.
if or when the convertible gives you issue
PM me
I have fixed several
if or when the convertible top gives you problems
PM me
I have fixed many
@@ChristoherWGray whats the secret fix lol
Can i remove the middle grill or middle piece off the old bumper and put it on the new 1.Just incase the new bumper I'm ordering don't come with a middle piece.I'm not shure if the middle piece has to be on the bumper ??
The grill is removable. Good luck.
Holy Moly.
All that to replace a flippin' headlight?
My old 2000 Ford Mustang required you to pull two simple locking bars from the back of the headlight and you could then manuver the entire light to replace bulbs or replace the entire headlight assembly. Push the bars back in, good to go.
It took six seconds in your driveway, no tools needed.
This? This is purposely engineered B.S. Wow. I only watched this because a friend bought a Sebring recently with yellowed headlights. After seeing this, I'm just going to try restoring them with sandpaper and toothpaste instead. Either that or have a mechanic charge me two hours of labor on top of the charge for the headlights themselves! I ain't got time for all that.
I have some questions regarding the harness that runs along the top of the radiator
You shouldn't have to mess with any wires. The bulbs easily snap out of the lights (4:51).
Torque wrench????? Looks like a 1/4" drive ratchet to me.
LMFAO i was cracking up on that! All seriousness though he got lucky most of these cars blow a bulb it trips a code and still won't work you got to. Clear it..i know stupid
y0... I would’ve been so pissed if you took all that time & all those parts off my car. Just to change one light
I’m very pissed about it right now
The video is good but the car design is shit. I never needed to look for a video on how to change a headlight bulb, but then I never had to remove the bumper to do that either. What a freakin puzzle this car is, and the battery replacement is not any easier
Work smart not hard buddy! We are on flat rate or book time lol you do not need to do most of the stuff you. Did
how could he have gotten it done faster?
ZSTRODE. Lol
We need a Chrysler sebring 2007 manual transmission that's what usa needs to bring to America. Day have manual but different country with engine 2.0l crd
Корректора на новой нет. Ещё раз снимать надо будет и ставить со старой.
Not a torque wrench. It's a rachet...
Damn that's a lot to replace a headlight Chrysler make everything hard
Most modern cars that have plastic bumpers are the same whatever the brand ,they dont design them to be fixed anymore ,,they build em to last just after the warranty expires then you get a new one or get nickle and dimed to death ,, headlights fog over the clearcoat peels they start to rust real bad all right about the same time.
@@larry40 especially FCA
they are the worst!
I can replace a battery or headlight tubs on my KIA in 5 minutes or so
it's actually a result of some of that fine German engineering
Then Gen 3 sebrings were a result of the disaster of the Mercedes Benz / Chrysler debacle
it has a good exterior design but some crazy internal designs
Torque wrench??? Tf
Ratchet…