Pro Tip for anyone watching this: After a long day, you dont need to remove that panel in the center over the radiator for removing the bumper or the headlights. You can just remove the clips at the front and the 2 front bolts.
Very helpful! I did mine last night. I didn't even realize how much money I was saving until I watched the video. I just ran out of time to take it somewhere before leaving for vacation. U r saving lots of people lots of $! Suggestion for improvement would be a tool list in the comments to gather them up front b4 starting.
I cannot believe how many steps are involved in this. Unbelievable. Nothing I’ve ever seen, (as far as replacing a headlight), has ever been this difficult.
Helpful video but not 100% accurate. Radiator shroud doesn’t need to come off. Just those front push pin style clips. Also to remove the sides there is another 10mm hiding in the front wheel well. Pull the splash guard down slightly, you’ll see a little notch to get a pry tool in there. The bolt is right behind that notch, it keeps the bumper aligned to the fender at the very edge. The bolt comes out straight down. If you have the fog lights in the bumper you need to unclip the wires connected to them too. The wires are pretty thin so be careful.
Thank you! I'm currently working on a lot more 😉 CAI is Stillen Gen 3, and splash shield for the CAI or under engine? Either way the answer is none.. 😅
OMG! Im so sorry for the late response! So in 2014 they re-branded the G37 to Q60. The 2014 is exactly the same as the 2013, just a new name. So yes, kinda. I have yet to get my hands on a Q60 but I would assume it's a very similar process.
Just did mine and you don’t have to take off the bolts from the first (8red) (2yellow) 10mm boots btw :) thanks for the awesome video tho everything else is great!!
I did not take the wires off of the back, though I would recommend removing them just to be super safe. But as long as you check on the headlight, you should be fine!
Stillen Gen 3 Intakes, Z1 Ported Intake Manifold Upper, Invidia Test Pipes, Tomei Titanium Exhaust, Eibach Lowering Springs, and a whole bunch of adjustable suspension components from Z1 Motorsports.
Ah I see. The glue is definitely the hardest and most important part of the whole process. You can peel them apart and customize them all you want but if they aren't re-sealed properly, you're going to have a bad day haha.
Dude keep up this great quality videos, best explanations I’ve seen in TH-cam bro. Good stuff.
Thanks! I watch a lot of how to vids and I wanted to try to make something that had all of the information that people may need.
Very detailed video! Made removal easy without breaking any hidden clips etc. TY! Love the exhaust, sounds perfect!
Pro Tip for anyone watching this: After a long day, you dont need to remove that panel in the center over the radiator for removing the bumper or the headlights. You can just remove the clips at the front and the 2 front bolts.
Can you do a video on those custom headlights and how you wired them and everything?
Great quality video and great instructions. Helps so much !!!
I really needed help and this video had it. I also sent you an email about a few Qs I have about the g37 I recently bought as a project car.
Thanks
Very helpful! I did mine last night. I didn't even realize how much money I was saving until I watched the video. I just ran out of time to take it somewhere before leaving for vacation. U r saving lots of people lots of $! Suggestion for improvement would be a tool list in the comments to gather them up front b4 starting.
Hey! Thanks a lot for the feedback! I'm happy I could help!! I will update it to show a list of tools required.
Thanks a lot dude, once this weather clears I'm gonna be putting my gen 3 intakes in so... this vid was super helpful
Not a problem my man, keep moddin! 👍✌️
yo i wanted to say thanks. this video helped me out a lot while removing my headlights.
I cannot believe how many steps are involved in this. Unbelievable. Nothing I’ve ever seen, (as far as replacing a headlight), has ever been this difficult.
I know, I couldn't believe it earlier. It can be such a pain.
Best video by far
You can take apart the entire car with a 10mm XD i personally found this out when i was working on my G35
hey man just came across your channel, keep up the great content and help, best wishes :)
Thank so much!
Hey could you tell me what spoiler that is? Trying to find one that fits and I love that one! Thank you
this is a great tutorial, great detail man i like it 👏🏻
Thanks so much dude!
Where did you get that spoiler?
the intro gotta be the funniest thing he sped the video and kept the audio the same speed
You just pop out the sides from the bumper? Isn't it connected with 2 Philips screws?
Thanks for the great video. Very helpful.
I see you're running gen 3 intakes, is your g tuned or stock tune?
Helpful video but not 100% accurate. Radiator shroud doesn’t need to come off. Just those front push pin style clips. Also to remove the sides there is another 10mm hiding in the front wheel well. Pull the splash guard down slightly, you’ll see a little notch to get a pry tool in there. The bolt is right behind that notch, it keeps the bumper aligned to the fender at the very edge. The bolt comes out straight down. If you have the fog lights in the bumper you need to unclip the wires connected to them too. The wires are pretty thin so be careful.
where did u get that wing???? i need it!
Where’d you get the headlight from?
Came across your channel today, what kind of wing do you have ?
Great content! Def new subscriber.What CAI and splash shield are you using?
Thank you! I'm currently working on a lot more 😉 CAI is Stillen Gen 3, and splash shield for the CAI or under engine? Either way the answer is none.. 😅
Expreme G37 lol sorry well I ment to cover the cai. I wanted to get the long cai but I was told that water might get into my engine.
Thanks man for the video. I'm gonna have the new switchback headlights installed here soon.
Not a problem! Happy to help!!
Mind if I ask what spoiler that is?
Where did you find your car tail???
Good video man keep em coming
Thanks dude! Definitely will.
what spoiler do you got?
Hey this would be the same for the Q60s right ?
OMG! Im so sorry for the late response! So in 2014 they re-branded the G37 to Q60. The 2014 is exactly the same as the 2013, just a new name. So yes, kinda. I have yet to get my hands on a Q60 but I would assume it's a very similar process.
Expreme G37 it’s okay man ! And ah okay just making sure cause I have the 2015 Q60s but still basically the same as the g37
Just did mine and you don’t have to take off the bolts from the first (8red) (2yellow) 10mm boots btw :) thanks for the awesome video tho everything else is great!!
What size are those halos bro? I just subscribed
Great video!
Did you have to take all the wires off the back before placing in oven ??
I did not take the wires off of the back, though I would recommend removing them just to be super safe. But as long as you check on the headlight, you should be fine!
Yea I didn’t. I did it last weekend. Your video was nice. Got the water out my headlight and it’s sealed. Thanks !
Is that a g37x?
Wow this is exactly what I was looking for god bless
Thanks man! Happy to help.
What are all the mods that you have on your car?
Stillen Gen 3 Intakes, Z1 Ported Intake Manifold Upper, Invidia Test Pipes, Tomei Titanium Exhaust, Eibach Lowering Springs, and a whole bunch of adjustable suspension components from Z1 Motorsports.
Ready for evergreen this season?
Oh you better believe I am! I can't wait
ExpremeG37 what kind of exhaust do you have on you G37
It's a Tomei ExpremeTi Titanium exhaust
Subbed for future content! :)
Thanks so much for the support!
Much appreciated.
Damn baby girl!
is it a 2010 G37?
It's a 2013, but same thing haha
Looked so easy but I got discouraged at the glue lol that’s so weird
Ah I see. The glue is definitely the hardest and most important part of the whole process. You can peel them apart and customize them all you want but if they aren't re-sealed properly, you're going to have a bad day haha.
I thought it was going to be easy too much work for me
😂 Which part? The headlights or the bumper? Yeah it is a bit, and it can be a pain and tough on your hands at times.
Thumbs up from anyone else that has to spend 600 on a new set of headlights now?