Thank you I appreciate it tomorrow morrow I get into what I do I figure everything out it’s been very helpful welding Leticoe I don’t know how to do it but I do it I’ve been studying how I figure things out I figure it out if I can’t figure it out then I’ll look into it and I just figured it out and I appreciate your help and I do have a G 35 red San Marcos Texas fire hot have a wonderful day
I have an infiniti G25x and I am having issues with the left turn signal when I use the right turn signal it flashes normal but when I use the left turn signal it flashes both the left and the right and my screen inside the car flashes also would that be an issue with the fuses or relays and can I find the turn signal fuses in the same fuse box any help would be appreciated. Thanks
Blessings....I juss changed all my o2 se sensors and both cats on my 2012g37 car still ah hurt me mon overheating to easily lol...juss prayed for an answer LORD HAVE MERCY I find out I gotta 7th o2 sensor fuse in that compartment ❤ ima change it out 2mar pray for me.
Thanks for sharing video. Big help. Now K tried testing and one of 10AMP. Fuse is not conducting when its in fuse box. But when I remove and inspect it, it works on multimeter and no problem ! So do you think its Fuse Box or Ballast ? Thanks
Thank you for your comment and question. You said that the fuse is not conducting in the fuse box, however when you remove and test it works. Did you turn on the head light before testing ? If so examine the port for the fuse if there is any corrosion if not replace the fuse and test again. What about the other fuse for the head light do they work? Do not change the blast or fuse box until relays, wire, fuse are checked out
My high and low beams went out only my fogs work 2008 Infiniti g35, I had water leaking in from sunroof and it was going right by that fuse box so i hope it's just needs new fuse and not fuse box and all.
You have to apply a bit of force to remove, also try to observe the wire at the bottom of the fuse box because it has a little curve that seems to hold it. Just apply the appropriate force.
The wires that goes into the fuse box could be what is holding it down, you will have to be gentle and play with it a bit, it will come out. Look for the clips ot tabs on the box to open it. Hope this helps
Thank you! Infiniti wanted to charge me $200 just for a diagnostic. I spent $30 at Autozone and learned how to do this myself!
Your welcome my friend
Infiniti dealer near me is bunch of clowns they couldn't even fix my car told me to go somewhere else
Great video bro u explained it like a teacher 👨🏫. And it’s was simple and easy to understand everything 😈😈😈
Glad I was helpful
Bruh that fuse box hates to come out. Thank you!
Bredda you shoulda keep up the video dem, very educational!! Up up up 🇯🇲🔥
Bless up fam thanks for the strength, I will do more video bless up
My problem was a little more involved. Water had gotten in my headlight and over time corroded part of the headlight ballast. Good video my man.👍
No problem
was your headlight still turning on though? because mine turns on for a few seconds then turns off i think it’s a relay
@@BilalErra No, when the ballast stopped working so did the light.
I had this issue just now and I changed the ballast but it won’t turn on, checked fuses and everything help? 🥲
@@yahirreyes2911 is it only one light or both that's the problem?
So thorough!
Excellent video
Thank you very much!
Thank you I appreciate it tomorrow morrow I get into what I do I figure everything out it’s been very helpful welding Leticoe I don’t know how to do it but I do it I’ve been studying how I figure things out I figure it out if I can’t figure it out then I’ll look into it and I just figured it out and I appreciate your help and I do have a G 35 red San Marcos Texas fire hot have a wonderful day
I have an infiniti G25x and I am having issues with the left turn signal when I use the right turn signal it flashes normal but when I use the left turn signal it flashes both the left and the right and my screen inside the car flashes also would that be an issue with the fuses or relays and can I find the turn signal fuses in the same fuse box any help would be appreciated. Thanks
Thanks for the detail
Your welcome
Blessings....I juss changed all my o2 se sensors and both cats on my 2012g37 car still ah hurt me mon overheating to easily lol...juss prayed for an answer LORD HAVE MERCY I find out I gotta 7th o2 sensor fuse in that compartment ❤ ima change it out 2mar pray for me.
Thank you!! Thank you 🙏🏼 thank you 🙂
Thanks you bro, thought I was gon have to take the whole fender off💪🏾
Your welcome bro
Either of my headlights or fog lamps are working I hope this is my problem as well
Thanks for sharing video. Big help.
Now K tried testing and one of 10AMP. Fuse is not conducting when its in fuse box. But when I remove and inspect it, it works on multimeter and no problem !
So do you think its Fuse Box or Ballast ? Thanks
Thank you for your comment and question. You said that the fuse is not conducting in the fuse box, however when you remove and test it works. Did you turn on the head light before testing ? If so examine the port for the fuse if there is any corrosion if not replace the fuse and test again. What about the other fuse for the head light do they work? Do not change the blast or fuse box until relays, wire, fuse are checked out
I got after market headlights and my low beams are constantly on even during the day, would it be the fuse?
Fuse is for current passage I believe, the relay controls whether current should be sent or not. Its more likely the relay.
Hey which fuse is for the corner lights ?
Did u figure it out bro?
It’s the first one it’s a 10
where would the push to start fuse be at?
For me, my driver-side headlight works occasionally. Sometimes it'll turn on and sometimes it won't. Probably ballast?
My high and low beams went out only my fogs work 2008 Infiniti g35, I had water leaking in from sunroof and it was going right by that fuse box so i hope it's just needs new fuse and not fuse box and all.
You will have to pull fuse box and examine if it is corroded
Amen 🙏🏾🔥🖤
The fuse box Is not coming off after 15 min of playing with it. Could I pull with force or will it ruin the wires ?
You have to apply a bit of force to remove, also try to observe the wire at the bottom of the fuse box because it has a little curve that seems to hold it. Just apply the appropriate force.
@@jamcarsrepair5320 sound good thank you !
is this the same with an 08 g35x
V36 generation shares same fuse box locations yes, but with an X model the layout and function of some fuses/relays are mixed around.
👍
I got 2007 Infiniti and I got the same problem you had 7
Did it fix the problem?
Yes it did
@@jamcarsrepair5320 thank you Bc my driver side headlight went out, I replaced the bulb, still doesn’t work, so I’m thinking fuse or ballast?
@@MrLexo562lb your ballast could be damaged
Much needed 👍🏽👍🏽. Having this issue on my 08 G35.. I changed the bulb and ballasts. Never thought to check the fuse..
@@MrLexo562lb what it was ?
With this problem, can the cost for repair be $1500 USD? My Infiniti fx35 right head lamp is not turning on
I’m having the same problem how did you fix it
I just got the problem to take the fuse box out to be able to open it
The wires that goes into the fuse box could be what is holding it down, you will have to be gentle and play with it a bit, it will come out. Look for the clips ot tabs on the box to open it. Hope this helps
U should invest on a GoPro camera instead of holding the phone
o