Grundig TK149 Belt Replacement
ฝัง
- เผยแพร่เมื่อ 19 พ.ย. 2020
- It's always annoying when a belt snaps on a reel-to-reel machine.
Some of them are surprisingly easy to replace, but many are a nightmare.
This one is somewhere in between. With a little patience, it can be done within maybe half an hour.
To save you some of the mistakes I made, I uploaded this video to show, what you'll have to expect on a TK149. - วิทยาศาสตร์และเทคโนโลยี
It is wrong method to replace the belt and defecult.thr right method from the back (bottom cover) u will find entrance to the motor belt cover 15:48 under the speaker .remove the 2 screw and install the belts.thats all.
You may be able to change the tape counter belt that way, but how would you get the drive belt around the flywheel without taking the axle out of at least one of the bearings?
@@AstraWerke remove the 2 scre and u will find it is easy to install the belt aroun the weel.i do it evry time when the belt cut
@@AstraWerke 15:48 u will find small iron cover with 2 screw blow the speaker directly.remove and install belts arround the axe
@@user-wm5ic5le1t My god, I wish I had known that before...
Well, when the belt rips again, I know what to do - thank you!
@@user-wm5ic5le1t Well, the engineers back then were alot smarter than me xD
Thanks alot for pointing it out!
Brought back a lot of memories from the 70's when I was a TV Engineer, the City and Guilds Examination also covered Radio and Tape Recorders. Many a happy hour pulling these apart, repairing and then re-assembling. If memory serves me right, the PCF valve (tube) is for generating the high frequency for the erase head and carrier frequency when recording... good old days... now everything is done with one chip, bring back the seventies I say!
You have a lot of patience dude !!!!!! very detailed work in a priceless audio machine. WELL DONE !
Thanks :D
Repair is a beautiful word.
oh yes it is
Excellent content, it's just like assembling a clock movement! Start from one end and proceed. Radio horology.
thank you for this i have a tk 146 which is similar this is a big help to me hello from Canada
Well, I'm glad I could help! :D
A nice and tidious job done sucessfully I have a Telefunken tape recorder model no Magenotphon 96 though electronics has somehow been done but I did'nt find the flat rubber belt for the motor and the fabric lined flat belt for the flywheel will you kindly give some information where from I may get the belts .
Thank you for uploading the video waiting eagerly for your kind reply .
Awsome! Great instructions!
Thanks :D
You are great
Classic Grundig design and and tidy inside
Hallo How and where can I buy the belt of this model, please guide me, thanks
They're sold via ebay :)
Great video.
Could you help me with instructions on how to replace the drive belt on a Grundig TK55 recorder.
Where do you suggest getting new belts for these old Grundigs? I have an SO 171 console unit i'm trying to get working just so I can get the tape to tape running and pull some old audio recordings of a late relative. I managed to get power to the tape unit and it's spinning up but i need 2 belts, not sure how to measure/spec (tightness level) or where to source these custom o-rings
Just type the make and model into ebay, you ought to find something.
super
Can you tell me how this TK149 records? I have one but can't get it to record!
There is a knob on the left of the top face. Select between "Automatik Sprache/Automatik Musik/Manuell/Trick" what you want to record (Speech, Music, custom) by twisting, then press the knob down and switch the lever on the right to "Start" simultaneously.
@@AstraWerke thank you I will try that! Amazing many thanks.
2 other belts were existing but not shown how to change at this video
Pretty sure you’re supposed to do it from underneath so the whole mechanism doesn’t fall apart like a clock movement.
There is no space underneath to operate.
völlig falsch!! Der Riemen wird von unten gewechselt. totally wrong!! The belt is changed from below.
You're absolutely right ! Never loosen the chassis for changing the belt !!!!!!!!!!!!
Much easier from below… remove the plate holding the lower flywheel holding point
can you albert? explain? i have TK 145 i need to this on
I want belt
ΕΧΩ ΕΝΑ ΤΚ146 ΤΟ ΕΔΩΣΑ ΓΙΑ ΔΙΟΡΘΩΜΑ ΚΑΙ ΜΟΥ ΤΟ ΕΦΕΡΑΝ ΜΕΤΑ ΑΠΟ ΚΑΙΡΟ ΔΙΑΛΥΜΕΝΟ ΜΠΟΡΕΙΤΕ ΝΑ ΜΟΥ ΠΕΙΤΕ ΠΟΣΟΥΣ ΙΜΑΝΤΕΣ ΕΧΕΙ ΝΑ ΨΑΞΩ ΝΑ ΒΡΩ
En español
Qué hablen en español