So, I'm starting from scratch. I plan to use home assistant and hue switches so I can keep my existing bulbs. I'm not going for super fancy lighting/color configurations. I just want to start simple with turning lights on/off based on our presence in the room. As I understand it, using Hue switches will allow me to keep old bulbs. But I can't quite figure out if I run HA (will do it on a raspberry pi) if I can skip getting the Hue bridge or Hue hub as long as I get a zigbee dongle. Since you didn't use it, I am thinking I can. But are the scenarios for future-proofing where I would still need the bridge/hub?
if not planned yet, maybe one episode about integrating "old" smart home Wifi & Bluetooth devices to your Home Assistant controlled Smart Home, while also reducing some of the security vulnerabilities. reasoning beeing, that some might have started with these 'bad' low-cost and Wifi/BT smart home devices and want to upgrade to HA with zigbee or zwave
Nice video. But is there any other cheaper bulb alternative to Philips Hue that can be used along with this Sonoff Hub in a fully local environment? Thanks
Is it working in the same wave with Ikea Tardfri? I’m looking for integrations like a ,,normal” Switch in my wall and also Switch on/off in my Homeassistant
I reset my hue bulb w a dimmer switch, it blinked a few times so I am pretty sure it worked. Then inside of HA, I clicked my ZigBee add device, its not finding it. The bulb is on a lamp in the same table as the HA Green. Ive added other Zigbee devices no problem. Any ideas?
This is a interesting series and for me very topical as I currently have an IOT module in my final year at uni. The functionality aspects are very simple but the security aspects… well, they don’t seem to get much attention.
You certainly can, you can run it either as a virtual machine in Windows, or as a Docker container - although it's worth noting that by running it on your main PC, if your PC goes to sleep or is switched off, your home automations will stop working and you won't be able to control your devices through it. Hence the recommendation of using a device like a Raspberry Pi that can be on 24/7 without much issue.
Well it looks like I need to upgrade my unraid server after reading about yours on your website. Mine only has 58 terabytes, dual 10tb parity, a 1950X threadripper on a ROG Zenith Extreme mobo.
So, I'm starting from scratch. I plan to use home assistant and hue switches so I can keep my existing bulbs. I'm not going for super fancy lighting/color configurations. I just want to start simple with turning lights on/off based on our presence in the room. As I understand it, using Hue switches will allow me to keep old bulbs. But I can't quite figure out if I run HA (will do it on a raspberry pi) if I can skip getting the Hue bridge or Hue hub as long as I get a zigbee dongle. Since you didn't use it, I am thinking I can. But are the scenarios for future-proofing where I would still need the bridge/hub?
if not planned yet, maybe one episode about integrating "old" smart home Wifi & Bluetooth devices to your Home Assistant controlled Smart Home, while also reducing some of the security vulnerabilities.
reasoning beeing, that some might have started with these 'bad' low-cost and Wifi/BT smart home devices and want to upgrade to HA with zigbee or zwave
Really good series of videos, keep it up 👍
Nice video. But is there any other cheaper bulb alternative to Philips Hue that can be used along with this Sonoff Hub in a fully local environment?
Thanks
I think the IKEA TRADFRI series could be what you're looking for!
Keep it coming! Hopefulyl getting a new place soon and was looking for some good advice for setting up these systems.
Y
Thank fffffff
Is it working in the same wave with Ikea Tardfri? I’m looking for integrations like a ,,normal” Switch in my wall and also Switch on/off in my Homeassistant
I reset my hue bulb w a dimmer switch, it blinked a few times so I am pretty sure it worked. Then inside of HA, I clicked my ZigBee add device, its not finding it. The bulb is on a lamp in the same table as the HA Green. Ive added other Zigbee devices no problem. Any ideas?
This is a interesting series and for me very topical as I currently have an IOT module in my final year at uni. The functionality aspects are very simple but the security aspects… well, they don’t seem to get much attention.
Silly question but can this be done, just from my main windows PC, like as an app not an OS?
You certainly can, you can run it either as a virtual machine in Windows, or as a Docker container - although it's worth noting that by running it on your main PC, if your PC goes to sleep or is switched off, your home automations will stop working and you won't be able to control your devices through it. Hence the recommendation of using a device like a Raspberry Pi that can be on 24/7 without much issue.
@@TechteamGB or run docker VM in a Synology NAS - as my nas is on 24/7
Well it looks like I need to upgrade my unraid server after reading about yours on your website. Mine only has 58 terabytes, dual 10tb parity, a 1950X threadripper on a ROG Zenith Extreme mobo.