What I said and my teacher says nobody drives around in no c10 anymore shit Ik ppl who do and I am to. But the. Again my “teacher” don’t like cars really and other students think they know wat they talkin bout but really no like who would buy a burnt down charger for 10k
This thing has all its weight in the right places though, chopped bed, chopped fender wells, even the axles don't look that beefy (but you know underneath they are just incredible), and the Steve Morris twin turbo big block chevy, which start at 500 CI and 2500 horsepower. I wanna know what the transfer case and those axles are made of, cause they hit this thing HARD on the launch with everything locked up. Fun to see.
I love this truck. Used to be you didn’t see very many gasoline 4wd square body trucks with a turbocharger, one that runs that well. It would be hard not to be tempted to put some street slicks on the back a couple of nights and go take some money from some unassuming victims.
Square body's one of the sharpest trucks Chevrolet ever come out with. But in my opinion a person trying to impress to much can make them look "not that sharp" too much lift with not enough rubber or not enough lift and to much rubber. There's a sweet spot that I always liked, a square body with 8-10 inch lift running 15/38 tires was my trucks specs. I ran it with newer 350 FI motor with stock running gears. The automatic transmission was beefed up a little but I still considered it stock. This square body's the ticket. Badass from get to go. Hats off to u brother. What was the time on that last run before the tape ended. The one before the end was 2.61
If you really want to keep it light up front d44 with cromolly and heavy duty knuckles a lot lighter then d60 and is still strong enough as long as you keep the tires under 40 inches tall
I’ll never understand why people think they need a kingpin 60 in their k10 street truck when you got this dude mud racing a twin turbo big block on a 10 bolt front😂
@@Buddy713 I would assume not. I'm so used to seeing big two ton duce duce axles that even Corp 14's and big Dana's look dinky . 😎 Either way you look at , there is zero doubt that is one fast rig....she looks more fun than a greased pig in a prom dress🤣😂
Not sure what the track length was. They seem to very any where from 140-300 from the ones I’ve been to. I’d have to guess this o es in the 250-300 range.
I’m a mopar guy.... but who doesn’t love a square body Chevy!
prius drivers
Sammie Peanut butter
Your mom
Me. I'm bias towards dentside fords
I’m a Ford guy and I still love this body style, the 60’s are alright but these trucks are straight mean looking with a lift kit
What I said and my teacher says nobody drives around in no c10 anymore shit Ik ppl who do and I am to. But the. Again my “teacher” don’t like cars really and other students think they know wat they talkin bout but really no like who would buy a burnt down charger for 10k
The Porsche Cayenne "I am a strong off-road-car"
A square-body "hold my beer..." XD
😂😂😂😂
...just hook up the chain, the square will go 3 seconds with the porsche in tow!!!
Truck: Has four wheel drive
Also truck: Front tires barely touch the ground
*BADASS*
Love that body style! & the power plant of course! 😍
Imagine that Chevy on the streets 💪🏽
I couldn't own something like this truck. I'd be done lost my driver license from driving it on the street. 😂👍😎✌🙏
Absolutely just exhilarating seeing such a masterpiece crafted and working it's magic!!!
Thanks for sharing. That's a heavy truck running 2.6XX, not to mention the 400lbs of leaf springs. Good Job.
This thing has all its weight in the right places though, chopped bed, chopped fender wells, even the axles don't look that beefy (but you know underneath they are just incredible), and the Steve Morris twin turbo big block chevy, which start at 500 CI and 2500 horsepower. I wanna know what the transfer case and those axles are made of, cause they hit this thing HARD on the launch with everything locked up. Fun to see.
No need for front tires till the end, just the way it should be, pure power till the last drop, PERFECT BUILD!!!!! Congrats and good work 👍👍
I love this truck. Used to be you didn’t see very many gasoline 4wd square body trucks with a turbocharger, one that runs that well. It would be hard not to be tempted to put some street slicks on the back a couple of nights and go take some money from some unassuming victims.
Jz out of Kawkawlin. Have to see it in person to really appreciate this truck!!
Nice bowtie. That thing sure tills a good garden plot!
Square body Chevy nothing screams American better than a old school square body what a gorgeous truck
Best bumper sticker in Truck History!! Only thing faster than my truck is my Zipper!! Fuck ya!!! Made my day 💪
Square body's one of the sharpest trucks Chevrolet ever come out with. But in my opinion a person trying to impress to much can make them look "not that sharp" too much lift with not enough rubber or not enough lift and to much rubber. There's a sweet spot that I always liked, a square body with 8-10 inch lift running 15/38 tires was my trucks specs. I ran it with newer 350 FI motor with stock running gears. The automatic transmission was beefed up a little but I still considered it stock.
This square body's the ticket. Badass from get to go. Hats off to u brother. What was the time on that last run before the tape ended. The one before the end was 2.61
That is a sweet ride right there boys and girls👍👍✌✌
A bit more suspension and 4 links and thats my dream truck!
Nice chebby 😉fast as hell with little tires 🤘
Very very nice job. Responsive and very Torquay
Most badass thing I've ever seen
That Chevy is really the heart beat of America fine truck right there yeah 👍
Bowtie all the way.
That damn chevy is something else like to see it in the mud
Heres my 84 shorty c10 sitting in the garage beat to hell with a tired lame 350. That truck is sweeet
A Steve Morris engine has got to shake the ground when it goes by! Beautiful build...crazy as f*$K rear tires!
Badass square body 👍
I really like the square body
Didn't even watch the video yet and I already love it!!!!
I want this combo on my TA .. who’s the owner please and specifications... ty !
What a beast!
Man that's the sound that makes liberals cry 😍
Nice . Very nice . Bad ass Chevy truck .....
Nice Truck! Chevy 💪 💪!!
That's right, powered by Chevy.
Gotta love th chevys/Gmc that’s a very fun ride
Damn that thing took off
Ten bolt and push pull steering just killing it!
If you really want to keep it light up front d44 with cromolly and heavy duty knuckles a lot lighter then d60 and is still strong enough as long as you keep the tires under 40 inches tall
Is these the truck ripping the sand dunes couple years ago? Either way badass
That truck is ridiculous
It must have fiberglass doors or other parts cuz paint looks like it layed a lil different on the door
Car person i see many eyes wouldn't have saw that
dont sell Krakk good eye sir!
Shhh...
Some Caltracs and that thing will hit 10's in the 1/4 mile. Kind of cool that you cant hear those turbos spinning like a bumble bee.
Nice video and a Thumbs Up liked.
Cummins 5.9 don't have the rocket power this TT BBC has.
Does it have different gears in the front and rear to compensate for the tires???
Thqts one cool truck love it thanks guys
I bet that thing will hit some nasty times on the drag trip
It's proably got 8's
That short bed is bad ass
Nice truck 👍👍
His zipper might break the sound barrier
🤣😂🤣😂🤣
🤣🤣🤣🤣
Bad ass man just bad ass
More of a Ford guy, but square body Chevys are real beauties.
So are the GMT800's (1999-2006)
I need the sticker on the back of the window🤣🤟🤙
Probably the baddest fucking thing I ever seen!
Id like to see how you ran the exhaust and turbos.. Im needing some learnings ( proper English )
You should probbly contact Steve Morrison Racing
💯 Dope Sh**🔥🔥🔥man that's a Nice Set-up Bro keep the vids coming 👍🏾👍🏾👍🏾👍🏾👍🏾💪🏾💪🏾💪🏾💪🏾💪🏾🔥💥🏁🏁🏁💯
This is very cool.
SOUNDS DAMN GOOD! BAD ASS..
Love the lope!!!!
Wonder what the hp numbers are. Thing is a monster!
Met him at kliensmchidt. He said it was around 2700 to the crank on full boost
Not sure but seen the truck live last year absolutely nasty and if i remember right it was only 434cid
It's a steve morris 540 twin 88 bull eyes turbos making 2500 hp
Looks like team English e85 truck with a new paint job
Looks great, sounds great, and fucking rips
thats a bad ass truck
🤔 how many times change transmissionS .
That thing could drive on water
DANG!!! I wanna put that power plant in my elcamino lol
Looks better than these new Chevy's
What's the little bracket near the front license plate for?
Flag mount
I got ah few dirt roads around here I need to borrow your truck bro
Now I’ll take that in my 77 k10
Imagine showing up to a mud/dirt drag with your fancy rail thing with a nitro/blower setup and getting ANNIHILATED by a squarebody.
Angry as hell👍
Would anyone be willing to drop some knowledge onto what it is called they are doing and as to what the 2.8,2.7,2.6 are in relation too?
I really have no idea but it seems like it's dirt drag racing and that is the time for the run. maybe a 500 foot race?
Somebody get that man a parachute before he knocks those trees down🤔
What size and name of front tires
What transmission is he using ????
I just came 🤷♂️
thatkyleguy 1 me and my mistress both .
So did i.. and my girlfriend, and her girlfriend.
@@77chevy4x4 man, your living the dream
@@mikeuhlir4823 your living the dream dude!!
10 bolt Front end for the win.
Kraig Chinn dana 60 ftw 14 bolt ftw
Gsfbffx Pdhhdf that is not a dana 60!!!
...holy crap thatz fast!!! =)
Can I have the old set up
that thing rips!
I’ll never understand why people think they need a kingpin 60 in their k10 street truck when you got this dude mud racing a twin turbo big block on a 10 bolt front😂
What transfer case did you use
Looks like a straight through SCS
Square body nation
REAL NICE
Damn I just made a mess
what tires you have in the front?
No idea what those are. Old sand tire design
What is the front wheel and tire setup?
BASSBOOSTED_BOSS a set of sand tires. No idea on name.
Is that a Steve Morris engine?
Yes
That’s a bad setup that dude builds top notch engines! I bet it won’t even on kill!
How does he not explode the tiny axles ?
What ever he's doing keep doing it cus the bigger the axle the more power they suck up.
Because there’s nothing stock about them.
@@Buddy713 I would assume not. I'm so used to seeing big two ton duce duce axles that even Corp 14's and big Dana's look dinky . 😎 Either way you look at , there is zero doubt that is one fast rig....she looks more fun than a greased pig in a prom dress🤣😂
Those guys standing that close are really in dangers path
Are you referring to the track crew?
I got a 57 chev pick up
Is that a 300 ft time ?
Not sure what the track length was. They seem to very any where from 140-300 from the ones I’ve been to. I’d have to guess this o es in the 250-300 range.
That looks like it would be easy to flip
Nice
now that's murica!!!!!!
Wicked!
Easy 20-30k motor being Steve Morrison
That's 1 bad bitch, his zipper must be very fast
That is such a nice truck it is a sham
How so?
@@Buddy713 to many mods that and the cut the bed up
It’s a drag car. It’s not like these are rare. Ok s you can build a brand new one for cheap. Every body panel is being produced for them.
Super sick
Wheel spin? no problem