Best Gauge for your car? - Autool X60 OBD2 Gauge Install and Review
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- In this video I am installing and reviewing the Autool X60 OBD2 Gauge!
This gauge allows you to plug into your vehicles existing OBD2 port and view live data from your vehicle, such as;
Speed
Coolant temp
Intake temp
Oil temp
MAP
Fuel
Average fuel MPG
And many more features!
This gauge also allows you to read and scan codes and faults stored in the ECU of your vehicle. If your vehicle has any warning lights this gauge can give you the code from which you can check to see what is causing the fault!
This OBD2 gauge is a great way to get an inside view into your car.
Link to product below:
www.amazon.co....
Please like, share and subscribe to support my channel!
Like my page on Facebook: AbzRazYT
Take a look at Abz Raz (@AbzRaz): Ab...
I stream on Twitch: / abz_raz
This is consumer advice and review purposes only. I am in no way sponsored or affiliated with any brands mentioned in this video.
#autoolx60 #carmods #obd2
My car so cheap.. No RPM meter..thanks for review. I just order one.. Hope it got the analog style rpm meter.
It should have it provided it is X60 model, thanks for your support!
Did it have it ?
Yes there is analog rpm. Though the display small.. I end up using the digital display rpm
Good review.This is a nice looking guage and has a lot of functions.Thinking about buying this for my Peugeot 107 as they dont have a temperature guage so this would be very practical.
Can you change the MAP (manifold absolut pressure) from KPa to Bar? and do you also know if already takes off the atmospheric pressure?
Great Vid!
Hello. It lets you choose between metric and imperial, and these options affect all the data. So for MAP it shows PSI (imperial) and kPa (metric). Definitely a con for this gauge, as you can't change each individual measurement between imperial or metric.
It does not state whether it removes atp or not, but I assume it does as it reads the data from the ECU which most vehicles account for atp and deduct it
Thanks for your comment and support!
Love it!!!iggy owner also greetings from greece
Hi, bro. Got a question, I know this was 3 years ago or so, but I wanna know what happens after you turn off the car, it says theres a sleep mode, but is it necesary to unplug the OBD cable? Or the power consumption its not a problem? Thx btw!
Hi , can I make it beep on a chosen coolant temperature?
Hi, the sweeping 'Rev' counter at 2:20 - Is that on the standard Autool X60 or is yours a different model? Not see that screen on other reviews. Thanks
Hello, that is standard on the Autool X60. As you scroll through the different options and screens it will come up
@@AbzRaz Great thanks. I've ordered one so I will soon find out. Thanks for responding
@@Youvideo1500 No worries, thanks for your support!
@@Youvideo1500 Did it have it `?
Hi sorry i know you did this a while back , just need to know the fuel consumption L/100km is it average i have another type and the reading goes up and down
instantly as you accelerate/slow ( from 5 to 20 instantly ) does this do it gradually?? thank you great videos
Hi, there's the first screen which is live fuel consumption which changes on Accel/decel,, the second after that one is fuel consumption average. So there's both options. Hope this helps
I cannot get any assistance from the company here in China but I read that it was comparable with the 06 mini Cooper S but it cannot read cannot connect to ECU any suggestions
Hello, I believe the mini cooper has a different configuration from the OBD2 connection compared to most other vehicles. Unfortunately I am not 100% aware of how to get it working. I will try and research to see if there is any information online.
Hello my friend. I have a Suzuki Ignis sport 2004 also and I bought the autool x60 because I saw it in your video. Unfortunately it refuses to connect. Actually I plugged it in and after trying all the connection protocols it says CONNECTION FAILED and it restarts...
Do you have any idea how I can make it to connect properly ? Any help will be highly appreciated.
Hi, can I set an alarm that beeps or buzz if the engine temperature exceeds a set temperature?
Hello, you can set an alert for coolant temperature, speed and battery voltage. I use the coolant alert in case my engine over heats. It is in the system settings. Hope this helps!
The option 'Display settings' is not available/selectable in your video. Did you figured out the way to activate it?
Hello, I believe it wasn't selectable as the screen I had selected was the rpm dial/gauge. When I am on the first screen with the coolant temperature it lets me change the display settings. The screen with the rpm gauge can not be edited. Hope this helps
Dose it read water temperature in Fahrenheit?
Hello, yes you can change to Fahrenheit
@@AbzRaz awesome. Thank you. Mines just arrived.
Nice. It shows one, big information and there is two small info under (voltage and something else). Is it possible to set Oil temperature, voltage and coolant temperature together (at one screen)?
How accurate is it my temp gauge on my car isn’t working want to use it for that function
I haven't measured the accuracy, it gives the value based on what your coolant temperature sensor reads, so as long as that is accurate it will read that value. So far for me it has worked well
Does it go off when you turn off the car without plugging it off?
Hello, in my car it does go off when I switch the car off.
Is there a way to get the coolant temp up as a gauge instead of numbers?
Hi, sorry for the delayed response. Unfortunately no, only gauge you can have is RPM, everything else is displayed as numbers only.
Thanks for the review. Does it lose settings if unplugged?
Hi, no I have unplugged it from the OBD2 port on multiple occasions and it does not reset. It also has a stand by feature, so you can leave it plugged into the OBD2 port, and it registers when the car is turned off and goes into stand by mode. Hope this helps, and thanks for your support!
@@AbzRaz Thanks. Ordering mine today.
Does it show instantaneous gas mileage in L/100 KM?
Does it have Boost sensor?
Hey mate, what’s the diameter of the actual round face of the gauge? Trying to fit in an existing hole. Cheers
Did you figure it out? I’m trying to understand if it could fit in a 52 mm cup
Does it work on Corsa D 2011? I saw somewhere there is incompatibility for Corsa D 2012 but dunno if that affects pre 2012 Corsa Ds or post 2012 ones. Can you clarify?
I am not sure if it is compatible. Best to try and contact autool directly through their website. If you provide your VIN number to them they can check the compatibility
does it default to temperature on startup?
Hi, whichever screen you choose before you turn your car ignition off it will default back to that screen. Hope this helps
Does it have a turbo gauge?
Hello, How can I change mp/h to km/h ?
Hi, yes you can change between imperial and metric measurements
@@AbzRaz Thanks ! Happy New Year ~
Oil temperature with an ignis sport? How?
Hi, Ignis Sport do not have oil temp sensor, I was just discussing what features the gauge had, so if your car has an oil temp sensor linked to the obd2 it will show on the gauge, sorry for confusion
Does it has turbo boost pressure function?
Nope
Is Autool X60 OBD2 Can Use for SUZUKI Jimny JB74?
Hi Phi, it works with cars that have an OBD2 port available. The car I am using this on is a Suzuki Ignis Sport HT81S.
@@AbzRaz Thanks !
Does it work on GMC 2004?
Hi, sorry for the delayed response. Provided your vehicle has an OBD2 port, it will work. I believe the GMC 2004 models have OBD2, but please check first.
How accurate is the speedometer?
Hi, sorry I did not see your comment til now. The Speedo works off your ECU speedo, so whatever you Speedo is showing is what the gauge will show
Does this have a fuel gauge?
Hi, sorry for the delayed response. It does have fuel gauge capabilities, provided your fuel gauge is linked to your ECU digitally. You will have to check this on your car
WARNING!!!
Please do not buy this product before checking for car model compatibility, failed connection on 2 cars, system check light on for 1 other car.
AUTOOL must publish compability list to buyers instead of requiring them to ask before purchase 👎🏻👎🏻👎🏻
hi, i have same problem, but after 20/30 start it's go!