3D Printed 750% Scale Dummy 13
ฝัง
- เผยแพร่เมื่อ 30 พ.ค. 2024
- I'm diving into the world of extreme scale models with this 750% scale dummy 13 model. This incredible model stands at a 1.2 meter tall with its towering size, allowing you to see every intricate detail up close. Watch as I explore the features, design, and functionality of this larger-than-life dummy 13 model. Whether you're a collector, enthusiast, or just love impressive scale models, you won't want to miss this in-depth build and stick around for the Glamourshots / short Movie. Subscribe for more fascinating content on all things 3d Printing.
/ mrcampbellprints
mrcampbellprints.etsy.com
/ mrcampbellprints
than.gs/u/1397003
cults3d.com/en/users/MrCampbe...
/ mrcampbellprints
Intro/Print Settings - 00:00
Frame Support Removal - 01:03
Amour Support Removal - 05:55
Assembly - 08:04
Neck and Head Assembly - 10:48
Leg Assembly - 11:22
Arm Assembly - 13:25
Neck and Head Assembly - 15:02
Glamour shots/Short Movie - 16:00
#3DPrintedFigures #ArticulatedCollectibles #CollectorEdition #PrecisionCraftsmanship #GeekArt #ToyEnthusiast #LimitedEdition #HighTechCollectibles #FigureArtistry #DynamicPoses #3DPrintingExcellence #MakerBotMagic #UltimakerCraftsmanship #FormlabsArtistry #SculpteoInnovation #PrusaMastery #bambulab #polymaker #esun #sunlu #printables #soozafone #animist #dummy13 #titan13 #toys - บันเทิง
4:25 At this point I think you could just give him a normal sized knife xD
Great Work!
Lol, I was thinking the same, I did try, but handles on the ones I had were either too small or too large
Now thats the real t23
Thanks
Cool, made one in 600%, largest ive seen online was 1337%
Looks like I have to beat 1337%
Amazing video
Glad you think so!
What 3d printer did you use? Please I need it my 3d printer is broken so I’m trying to replace it.
Bambulab p1s
I was gonna make a big t13, BUT NOT THAT BIG
Like they say go big or go 750% lol
@@MrCampbellPrints lol
Nice.
Thank you! Cheers!
Good vid man you have a new subscriber!
Thank you so much
Wow. If you go any bigger, it's probably worth printing the top of a ball as a seperate part to screw into the bottom?
Good idea
Would love to see one life size, whatever scale to make it about 6 feet tall.... probably about 1200% since its normally about 6 inches.
🫡
You should have yoused tree supports would have saved some time money and work . (Unless you’re already using tree supports) and what infill% did you use
I used 10% infill, I tried tree supports, but I found the quality of the print was better with just standard support
Do a video of all little dummy vs the 750%
I see you're a fan of the underdog, lol
Man i gotta print this !!! How many rolls of filament did it take ??
Only 2.5 rolls
Im trying to print The Dummy 13 action figure using the Cura software with my Ender 3 v3 se, But the parts especially the crotch doesn't seem to fit. If anyone knows the Ultimaker Cura Settings for the print in specific detail, please give me an answer. I Don't wanna waste anymore filament. i wanna scale it to 300% IDK what im doing wrong! why isn't this working for me?
I use the same settings that I printed this size dummy 13 on the 150% and 400% scale that I have printed mabey them
Have a play with the Horizontal Expansion. I used -0.1mm when I printed at 173%
you need to rotate it 180 angle
Are you referring to the armor
❤❤❤❤👍👍👍👍 классный
Thank you
How do you deal with the loose joints after a while
You can add a thin lay of Super glue or equivalent and let it dry and keep adding layers
@@MrCampbellPrints thanks for the tip🔥
If you use super glue, you have to either disassemble it before applying the glue, or apply it to the joint and keep wiggling the joint until it is completely dry, which takes longer than you think. The better solution is pledge floor wax. You just drop a few drops into the joint while it is still assembled. wiggle the joint to spread it and then let it sit for about 2-3 hours to dry. If its still loose, apply again. Because its not adhesive, you never have to worry about the joint seizing up.... Old trick learned from the Star Wars figures back in the 70's.....
@@wcbyrdiv Very helpful 🤝🔥
Where can I buy one?
mrcampbellprints.etsy.com/listing/1692155915
you did put the abdomen on the wrong side
I'm not sure I did
DO 1000%
I want to go bigger
Yeahhhhhhh that's SICK tho
Attack on titan but t13 figs
😆
@@MrCampbellPrints i subbed to your channel
Can you print me one?
😇
Yes, or no
Please
Please
Hi 😅
Hey there
How are you?
If you did a 1000% you woud have no room in your house
Mabey I'll make a bigger one.......
sticky bot are beter
😅
Nah bruh I printed one to see for my self and the print is so good
Can you print me one?
😅