Hi, can you tell me what the black antenna connected to the speaker is for? I accidentally cut it in half while removing the back but I have not noticed anything not working or getting a worse signal than before. Also thank you very much, I replaced the USB port and the main camera and it was just as easy as shown in your videos 👍🏻
any reason in particular the upper part was removed as well? didn't look like it was directly connected to any of the bottom usb parts, just wondering if one could skip that step
Hey can u help. Suddenly usb debugging stopped working. Device is charging but not detecting through pc. Other my android phones detecting in my pc. And while charging haptic vibration automatically turns on (vibrates very high) but in settings haptic feedback showing. Is this all issues due to defect in charging port? Should I have to visit service center???
Well if you have warranty, it is good you go with the service center.. otherwise you can back up and perform a reset,but what I feel like something wrong with the board. Easiest options will be a reset (to check software issues), and trying a new charging port first.
@@DIYGeardo hello i visited service center. They said its motherboard issue. My device Bootloader unlocked and said ur device out of warranty. Totally scam . Xiaomi giving warranty even after bootloader unkock. If motherboard has some problem, will my phone work?? As my phone running smoothly except data transfer mean otg not detecting in my phone. Even in fastboot mode its not detecting 🙁
My i charge my mi 11x with my power bank and after 1 hour i see my data cable is very heat and i disconnect and see my mobile jack burn 🔥 now mobile is charging but i can't use my wire earphones / so my question is can i repair my jack or just use with burn jack
Is it ok to skip the 1st part? Removing the battery connection? I need to replace the port of my poco f3. Getting looss connection. Not doing fast charging. And not able to read android auto
I have problems with my Poco F3, my Poco F3 doesn't want to connect to PC / OTG and the vibration function doesn't work, for sound, charger and mic it works I suspected that at first I had a problem with the port, I've replaced it 2x with the original one, removed the new Poco F3 + and tried to replace the plexible, the result is the same? Is there any other solution that I should check?
Hi sir, My MI11X turned dead while it was charging, what can be the reason behind this. mi service center is telling me motherboard is dead so it will cost me 11000 after discount so my question is can this issue be other than motherboard and is there any cheaper affordable repair option available around
Sorry for the delay.Probably a Bad IC.You can always check with a board level technician. Sometimes they can help you easily. Needs good inspection before deciding anything.
Kindly reply , my poco f3 not showing anything, display checked it was perfectly fine, but still not showing anything, only vibrate and pressing lock button ،, it also heat up above charging port
@@DIYGeardo yes , i checked it with another device ,, everything is fine , but only issue is still it shows nothing, only vibrate on lock buttons whenever pressed , and after pressing button it get heated above charging plug on display
the technician said that he cant replace my fingerprint power flex cable 😂😂😂 so i said him calmly to close his shop.i get onto other shop and he said the same 😂.so i use his equipments and i fix it myself i even paid them 100rs for using his tools .kuch ate nahi dukan kholke bet jata har koi 😡🤬
Hi, can you tell me what the black antenna connected to the speaker is for? I accidentally cut it in half while removing the back but I have not noticed anything not working or getting a worse signal than before.
Also thank you very much, I replaced the USB port and the main camera and it was just as easy as shown in your videos 👍🏻
I ripped the entire connector of this antenna from the mother board side and also haven't noticed anything . i think it's for 5g connectivity
thank you sir for easy tutorial
You are most welcome
Hello good sir. Is the battery for redmi k40 pro same as poco f3? Thanks a lot for this tutorial!
Yes, it is , same phone
any reason in particular the upper part was removed as well? didn't look like it was directly connected to any of the bottom usb parts, just wondering if one could skip that step
The only reason I can see is to disconnect the battery and thus disconnect any power supply to the phone. I assume it's a safety precaution?
Excellent tutorial
Thank you! Cheers!
substitute charging port working a fast charging ???
Hey sir,
I have changed the lower pcb .
Now i am unable to use usb or otg what to do ?
Hey can u help. Suddenly usb debugging stopped working. Device is charging but not detecting through pc. Other my android phones detecting in my pc. And while charging haptic vibration automatically turns on (vibrates very high) but in settings haptic feedback showing. Is this all issues due to defect in charging port? Should I have to visit service center???
I have reboot device to get back normal for haptic feedback. Same if again put in charging haptic feedback vibration become very high
Well if you have warranty, it is good you go with the service center.. otherwise you can back up and perform a reset,but what I feel like something wrong with the board. Easiest options will be a reset (to check software issues), and trying a new charging port first.
@@DIYGeardo hello i visited service center. They said its motherboard issue. My device Bootloader unlocked and said ur device out of warranty. Totally scam . Xiaomi giving warranty even after bootloader unkock. If motherboard has some problem, will my phone work?? As my phone running smoothly except data transfer mean otg not detecting in my phone. Even in fastboot mode its not detecting 🙁
@@DIYGeardo hey please reply. Read my comment please
@@sangamraj1426 I have exact same issue
Sir can we use mi 11x charging board in mi 11x pro?
what is the use of white cord in charging board
That is an antenna..
My i charge my mi 11x with my power bank and after 1 hour i see my data cable is very heat and i disconnect and see my mobile jack burn 🔥 now mobile is charging but i can't use my wire earphones / so my question is can i repair my jack or just use with burn jack
gracias bro
🙏Thanks
Is it ok to skip the 1st part? Removing the battery connection?
I need to replace the port of my poco f3. Getting looss connection. Not doing fast charging. And not able to read android auto
Always good to disconnect the power if possible
I have problems with my Poco F3, my Poco F3 doesn't want to connect to PC / OTG and the vibration function doesn't work, for sound, charger and mic it works I suspected that at first I had a problem with the port, I've replaced it 2x with the original one, removed the new Poco F3 + and tried to replace the plexible, the result is the same? Is there any other solution that I should check?
Did you replace the board or port?
@@DIYGeardo original new board
replace the board and replace the plexible and the result is still the same
@@ihsanizqian Where did you get the original parts (salvage from another device? Or just a Third party parts?
this is my problem also
Hi sir,
My MI11X turned dead while it was charging, what can be the reason behind this. mi service center is telling me motherboard is dead so it will cost me 11000 after discount so my question is can this issue be other than motherboard and is there any cheaper affordable repair option available around
Sorry for the delay.Probably a Bad IC.You can always check with a board level technician. Sometimes they can help you easily. Needs good inspection before deciding anything.
@@DIYGeardo thanks
same for my poco f3
@@batisterchristianwilli.6549 must be Ic problem
Buy used for 11k 😂
Kindly reply , my poco f3 not showing anything, display checked it was perfectly fine, but still not showing anything, only vibrate and pressing lock button ،, it also heat up above charging port
How do you know the display is fine? Did you test with another device?
@@DIYGeardo yes , i checked it with another device ,, everything is fine , but only issue is still it shows nothing, only vibrate on lock buttons whenever pressed , and after pressing button it get heated above charging plug on display
Aw
Obrigado
👍👍
Thanks
👍
Thanks
What is the price of charging port?
I would say about $20
@@DIYGeardo that's too expensive my Poco f3 charges well but sounds doesn't come while earphone is plugged in. Do I have to change whole thing?
in india this is cost about 4 us dollars only
@@deeptechz4857 same issues did you fix it?
No sir my unit has auto restarting issue because of cpu failure.
It persists many times and very annoying..
the technician said that he cant replace my fingerprint power flex cable 😂😂😂 so i said him calmly to close his shop.i get onto other shop and he said the same 😂.so i use his equipments and i fix it myself i even paid them 100rs for using his tools .kuch ate nahi dukan kholke bet jata har koi 😡🤬
Great