無限 MUGEN - FRONT UNDER SPOILER (GROUP A) // FL5 CIVIC TYPE R

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ก.พ. 2025
  • 無限 Mugen Front Under Spoiler (Group A) for the FL5 Civic Type R!
    In this video, I show the unboxing and install video on the Mugen Front Under Spoiler (Group A) for the FL5 Civic Type R.
    Link: www.mugen-powe...
    Please Note: I did not drill into the bumper and used 3M Extreme Mounting Tape instead of the supplied bolts and nuts.
    Ground clearance comparison: 5:56
    #シビックタイプr #無限 #fl5 #civictyper #Mugen #FrontLip #GroupA #FrontUnderSpoiler

ความคิดเห็น • 54

  • @puting7723
    @puting7723 8 หลายเดือนก่อน +1

    Just ordered mine , thanks for the video to showed installation!!

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน +1

      No worries at all! Hope the install goes well

  • @RaffaJDM
    @RaffaJDM 8 หลายเดือนก่อน

    wow congrats on the upgrade! 🤩 nice video guides! 👍I would be curious to see how it would look painted on NH0. We are also confidently awaiting the guide for the rest of the Mugen kit, side and rear! 😁

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน +1

      Lots of editing to do 😉

  • @GOLIATHtheGREAT
    @GOLIATHtheGREAT 8 หลายเดือนก่อน +1

    Another excellent Video!

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน

      Thanks for the feedback, much appreciated!

  • @scottt.4596
    @scottt.4596 8 หลายเดือนก่อน

    Looks great! Nice ‘how-to’ video, too.
    🙌🏻👌🏻🍻

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน +1

      Thank you Scott!

  • @LKF_LKY
    @LKF_LKY 8 หลายเดือนก่อน

    Nice! It looks so good!

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน

      Thank you Thank you ☺️

  • @ibeninja
    @ibeninja 8 หลายเดือนก่อน +2

    Thanks for the video! ordered my kit for my boost blue! cant wait to see the rest How long did it take for the kit to a arrive?

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน

      It didnt take long at all, possibly about 5 days from Japan via DHL

  • @もじじ-l4r
    @もじじ-l4r 16 วันที่ผ่านมา

    FL5納車待ちでリップスポイラー気になってたので動画拝見しました!
    カッコいいですね!他の方のコメントにバンパーに穴あけ不要との事を拝見しましたがディーラーでお願いしたら穴あけされたりするのでしょうか??

    • @Hattrk85
      @Hattrk85  16 วันที่ผ่านมา

      コメントありがとうございます! ディーラーにバンパーに穴を開けないように指示する必要があります。3M テープは非常に強力で、非常によく持ちこたえています!

  • @ren_avel
    @ren_avel 7 หลายเดือนก่อน

    Great update! will you update more parts in the future?

    • @Hattrk85
      @Hattrk85  7 หลายเดือนก่อน

      Definitely! There are still unreleased parts to purchase and install 😉

  • @Jdm_fl5
    @Jdm_fl5 8 หลายเดือนก่อน

    Super video quality 👍

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน

      Thank you to Apple 😅 Thank you for your kind feedback to the amateur youtuber 🙏

  • @TwinTurboFX
    @TwinTurboFX 24 วันที่ผ่านมา

    How has it held up these 7 Months? 3m tape is all you need to keep it secure? i wonder if its secure enough for high speed free way driving

    • @Hattrk85
      @Hattrk85  24 วันที่ผ่านมา

      It’s been great, no problems at all.

    • @christronie2601
      @christronie2601 6 วันที่ผ่านมา

      Good thing about the Mugen lip is that its not against the wind when the car is moving. A strong adhesive will just be very find.

  • @shahzeeqshahren6362
    @shahzeeqshahren6362 หลายเดือนก่อน

    did you have issues going up and down parking lot ramps, and humps?

    • @Hattrk85
      @Hattrk85  หลายเดือนก่อน +1

      You just have to be a lot more careful with the lip. I haven’t scraped as much as I thought I would so it’s not that bad.

    • @shahzeeqshahren6362
      @shahzeeqshahren6362 หลายเดือนก่อน +1

      @@Hattrk85 sweet. are you still on stock wheels or did you downsize to 18? I plan to stick to stock springs for now, did you change yours to lower ride height?

    • @Hattrk85
      @Hattrk85  หลายเดือนก่อน +1

      @ Rays G025 19s

  • @vellusk
    @vellusk 8 หลายเดือนก่อน

    congrats dude! what do you think so far? I think in the showcase videos ive seen it looked too chunky but idk if it looks better in person. Either way thanks for sharing

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน

      It’s an acquired taste, the pictures really don’t do it justice in all honesty.

  • @irvinbaez3158
    @irvinbaez3158 5 หลายเดือนก่อน

    Can we look at the car and the difference before and after

    • @Hattrk85
      @Hattrk85  5 หลายเดือนก่อน +1

      I’ll see if I can find a stock one near by. There is a shorts reel with both you can probably check

    • @irvinbaez3158
      @irvinbaez3158 5 หลายเดือนก่อน

      @@Hattrk85 mine is stock white 2024 im learning from you and other creators who have done mods to their fl5.. great job on your work shows how much you care

    • @Hattrk85
      @Hattrk85  5 หลายเดือนก่อน +1

      @@irvinbaez3158 Appreciate the feedback!

  • @4Kandlez
    @4Kandlez 8 หลายเดือนก่อน

    Nice video and very helpful but I cant say I like the design of that spoiler

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน

      It definitely is an acquired taste but I’m stuck with it now so I have to like it 😅

  • @iAsianevo
    @iAsianevo 8 หลายเดือนก่อน

    This is awesome!

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน

      Thank you thank you!

  • @a124as
    @a124as 8 หลายเดือนก่อน

    looks good brother!

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน

      Thank you so much 🙏

  • @Newyen6MT
    @Newyen6MT 8 หลายเดือนก่อน

    So cool

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน

      😎😎😎

  • @BlacklistRogue
    @BlacklistRogue 8 หลายเดือนก่อน

    So wait. Did you drill the spot the template asks ?

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน

      No I didnt drill

  • @sandmangti7040
    @sandmangti7040 8 หลายเดือนก่อน

    Fragile?
    So we put it on front lip of a car.
    Who has the “solid” version?

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน

      No I wouldn’t call this fragile. It’s same material as the bumper so it’s not too worrying.

  • @半田ゴッテゴテ
    @半田ゴッテゴテ 4 หลายเดือนก่อน

    バンパーには穴あけしないで取り付けしたのでしょうか?
    隙間は大丈夫ですか?

    • @Hattrk85
      @Hattrk85  4 หลายเดือนก่อน

      はい、バンパーに穴を開けずに、3mテープを余分に使いました。

    • @TwinTurboFX
      @TwinTurboFX 24 วันที่ผ่านมา

      @@Hattrk85 you feel it is secure enough without drilling and just the 3m Tape?

    • @Hattrk85
      @Hattrk85  24 วันที่ผ่านมา

      @ no problem at all, its been really solid

  • @Daniel-xb3ot
    @Daniel-xb3ot 8 หลายเดือนก่อน

    Won’t be buying that!

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน

      Good on you 🙂

  • @WombatMilk
    @WombatMilk 8 หลายเดือนก่อน +3

    Looks nice, but that approach angle is going to be brutal.

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน

      Been scared to scrape it ever since I put it on 😬

    • @paulie2476
      @paulie2476 8 หลายเดือนก่อน

      Agreed. No matter how i angle my Type R coming down the driveway, I always scrape the plastic / rubber curbed shield under the car.

    • @Hattrk85
      @Hattrk85  8 หลายเดือนก่อน +1

      @@paulie2476 it’s surprisingly been fine with the right angle, so I’m cautious but not too worried about it at the same time.

    • @WombatMilk
      @WombatMilk 8 หลายเดือนก่อน +3

      @@paulie2476 As much as it hurts, I consider that piece under the car as almost sacrificial at this point.