Gas Leakage Detector using Arduino and GSM Module with SMS Alert
ฝัง
- เผยแพร่เมื่อ 2 ธ.ค. 2018
- Gas Leakage Detector using Arduino and GSM Module with SMS Alert and Sound Alarm
in this project i will show you how to make a Gas Leakage Detector using Arduino and GSM Module .in this project we use
1) arduino uno
2) GSM module SIM 800
3) 16*2 lcd display
4) I2C lcd display module
5) 12 Volt DC power supply
6) a SIM card
7) GAS sensor -MQ9
8) connecting wire
all the Connection of this project given below
LCD display to i2c display : simply connect LcD dispaly to i2c display module with parallel
i2c to arduino : i2c to arduino pin
+ to +
- to -
SCA TO A4
SDA TO A5
Arduino to Gas sensor : Gas sensor to Arduino pin
+ to +
- to -
A0 to A0
GSM to Arduino connection: GSM to arduino
RX to D9
TX to D10
Ground to Ground pin (must be )
code: drive.google.com/file/d/10S8A...
i2c Library : drive.google.com/open?id=1wWm...
how to use i2c and display?
• How to connect i2C (16...
Share, Support, Subscribe!!!
Subscribe: / @infinitexpro
Twitter: / xproinfinite
Facebook: / infinitexpro1
Instagram: / infinitexpro
Music provided by Frequency
Track: Mabeha & Ulchero - Taste Of The Sun
Link: • Mabeha & Ulchero - Tas... - วิทยาศาสตร์และเทคโนโลยี
thanks a lot friend it help me a lot in school project
Cool and awesome video!
Thank you for the knowledge!!!!!!!!!
Thanks a lot
very thanks helped me in the project
Bruh can you send me your project manual for this project 🙏please help.
you coding part is awesome
Awesome bro
Can you please tell me what device exactly is that yellow that you labeled as gsm module? Thank you!
Can u please explain the formula you used to get the gas value or provide the reference from where u got that.
thanks bro
Is there a way to use multiple gas detectors (such as mq-2 all the way to mq-135) but with a different display and shows the percentage for each detector?or using individual displays?
Yes, is possible, you might be modify won.
Please explain the formula you used for analog sensor input. 🙏
Will the text message, text you until the gas leaking? So many text will be received?
hello, i have a question. i use gsm module sim900a??
will 800a gsm module be paired with 4g mobile or not
Any change in coding if we use gsm 900?
How to buy the specific material like Arduino,gsm ,gas sensor in online bcs verity of material with different range are there , which one is suitable for another one can u give the specific name of materials as u used example says gsm 800 , Arduino Uno R3
Is it possible to replace the battery to the adapter?
Can i use battery instead of power supply??
any idea bout how to add fan and iot
Hi, Can you show me a project to detect the pressure of any gas flow line (inside pipe). When the pressure will low then the alarm will be active & a solenoid vulve close the gas flow on the pipe.
I used your code using gsmSim800l but sms not sent.
@Infinite Xpro sir can you please provide that project. Very urgently needed
Can you please share the video of whether monitoring systems with sms alerts please help me
What if I just want to use a buzzer instead of gsm module and display! What would be the code for it? Arduino Uno+ mq9 sensor+ buzzer. Please let me know.
If you want to use this project with out display, simply attateste arduino uno +mq9+buzzer and modify your code regarding your requirement.
WHY GAS LEVEL IS ALWAYS ABOVE 15
DOES IT NEED CALIBRATION?
MESSAGE IS ALSO NOT SENDING EVEN AFTER CPROPER CONNECTION AND SIM.....
WHAT TO DO?
Sir.....lcd display was not displayed a content.....how I solve this problem....
Bro could you please send me about this project in pdf format? ..i need urgently
Bro I was receiving messages, but they are stored in sim card. Content was not displaying. Any settings in the set please specify.
Will it work with 800c module? And if it works then where shoul i put tx rx and gnd pin in arduino
Tx0-pin 2
RxO-pin 3
5vin-5V
Gnd-gnd
Gnd-gnd
How to program that lcd display...plzzz reply ...I have project to submit
From where we can buy GSM MODULE SIM 800
will there be a change in the code if we do not use i2c module and connect LCD directly to arduino ?????
You can use only lcd display, must be changed arduino to lcd code and pin out,heir we use i2c because of reduce wire connection.
Inserting sim in gsm module and how do you get message to your mobile
Can I use gsm 800L?
What is gonna cost me if i try to make this?
But it will keep on messaging if gas is dectected.pls reply
can we use the same code for gsm 800l
plese help me
Sir I want to know this project ke laptop working.... can u tell me your laptop working pls
Can we get link to buy GSM SIM MODULE 800
the code is included the fan but in the video there is fan. how can i add fan and buzzer sir.
Bro is gsm 800c is supoort
Bro in the code use buzzer but in experiment there is no buzzer ...is their nothing can happen for experiment
Is there sound output
Does it work with mq5 gas sensor without change or edit the coding that be given by you?
Yes, it will work.
@@InfiniteXpro can u make a video same with this project but only have to add on a solenoid valve. When alert of gas leakage reach the phone after 10 sec the solenoid valve will shut off. Can sir?
Please give me full project discription and what type component you want to use. Than i will try to make a video that you want to,or how you do the project that you want.
Or you give me relative project link, what you need.
@@InfiniteXpro a gas detector send alert to phone. If the person does not take an action to shut off the gas supply, a solenoid will shut it off after 10-15 sec after send the alert. And also make it shut it off in manually by sending command from phone to arduino to shut off the solenoid valve
please Sir can i get the block diagram for this project?
sir i need toxic gas detection project using mq 7 , mq 5, mq 4 plz replay me
How should I connect the pins if I don't use I2C Display
th-cam.com/video/btT4pXGUav0/w-d-xo.html
sir can i ask the full name of the GSM module? and is the code from MQ 9 gas sensor is the same code if you use mq 5 gas sensor? :)
Global System for Mobile (GSM), SIM800 GSM Module i used, in this project. MQ5 and MQ9 work same procedure and basic code is same, but those use detect different gas.
th-cam.com/video/zGQBMFTKcU4/w-d-xo.html
This is the link whare you find how to use i2c display and also library code
Led.init error.....
@infinate xpro plz give me the information about that
4g sim he ya 2g 🤔🤔
what will be approx cost in INR or USD for all this material ??
3400 INR may be
can u provide the circuit diagram for this
Bro! All things are working but display is not showing gas level only light is there no any alphabet showing.can you tell me what should I do now. please!
Can you please provide me code
Why this type of error shows me "error compiling for board Arduino/genujno Uno”
Goto "sketch" than" include library " and cleck "manage library " finaly, search on the search box "u8glib "and install the library, obviously you have to connected on internate connection.
LCD is not showing the display... I have made the same connections as u have showed... What's the problem?
Add i2c library
@@InfiniteXpro how can I add the library at display please help then which language u know I know Tamil pls do some help
Can we use gsm modul 900a for this project????
Yes, You can use but need to same pin configuration.
@@InfiniteXpro please can you give me GSM SIM800A purchase link please please please please please please
@@InfiniteXpro reply bro contact me in Instagram @imtirthpatel_
Bro help me your code is not available pls send the code Link discription link not work plzzzzz
Does this code work for sim900 gsm module
Probably its can work.need to connect perfectly arduino and sim900 gsm module
What type of wire is it M to M or F to F or what? Thankyou
Both. If you connect arduino to gsm, you have to use M to F and it depends on pin type of module.
@@InfiniteXpro thankyou. But can i use gsm module sim800l for this project?
Kindly help woth the purchas link
Is thare any change in coding if we use GSM 900a??
Coding is same, but you have to make sure same pin configuration.
@@InfiniteXpro bro i sent you an image of sim800 please check and tell me it's right or not
Sent me to infinitexpro@gmail.com
As is am using i2c
it show #include = no such file and directory ..! got any solution sir..?
At first need to add i2c library. Download link on the description bellow.
Sir actually it works but then not displaying at LCD
@@nishadhr4024 u need to adjust the i2c module's potentiometer(that blue screw on top)
Does it work with gsm module 800l?
Yes, it will work. But care about connection.
But i've bought without 12v dc power socket , how will it work?
Gsm 800l require power supply voltage: 3.8 to 4.2 volt. SO no need to extra 12v power supply
and is there any library that i'll install in this codes? :)
For gas sensor no need to install library but need to i2c display library, if you used.
@@InfiniteXpro can you please share the link to purchase this
Please collect equipment from your local markets
Can i make i sysetm that send a sms and activate a fan?
Yes you can,but arduino code and connections are different.
@@InfiniteXpro sir can you please provide that project. Very urgently needed
Sir how to install i2c library????
th-cam.com/video/XqHD9qM2zZw/w-d-xo.html this is the general process of how to add any library.at first download i2c library than install
*Please can you help me i need code for gas sensor with gsm module and buzzer, red & green leds. I want to send alert message and turn off the whole system with a message send to gsm module please help.*
Ok i will try.
For code check the video description below. This is Similar project of you are mention. But make some change. Hope that would work.
If you don't understand. Fell free to ask question
I did the project but when it detects there is no SMS alert send to my phone
Make sure your connection is ok and sim have minimum balance.
Hi
Hello... I'm not able to access the code. Can u please send the code
But sir still message are not sending to our phone 😕
sisy,i need the answer for this question immediately @infinite xpro
sir lcd is not displaying anything after uploading the code
16*2 lcd display with i2C module you have to install i2c library file and find it video description bellow. Make sure your connection is perfect.
What kind of sim card do you use for GSM module SIM 800?
Able to sent a sms
@@InfiniteXpro I cannot set up APN with the SIM card. I am using SIM 808 module. Is there anyway you can help me with the Arduino code how to set up APN
@@InfiniteXpro pro plz give me your number
You can connect me through infinitexpro@gmail.com
Cost this project
Bro....can we get message on 2 mobile phone...of gas leakage...?
Yes you can, please modify the code whare you put on your mobile number
@@InfiniteXpro can u plzz tell exactly wt to do....?
@@InfiniteXpro bro reply.....
i did exactly u did but i can't get output . message not received plz help
Puting your phone number with country code. like india +91############. Connect 12 volt power carefully to the gsm module. Check connection gsm to arduino board. You must be connected ground to ground arduino to gsm.
Mine also same. I just checked but still the same. I can’t receive the message
Does Gsm module sim800c will work?
It will work if you maintain proper pin configuration
@@InfiniteXpro does power supply 12V 1A will work in sim800c?
Please Take a look at the specifications written on the product.
@@InfiniteXpro I sent you an email
It works but for safe side you can use 9v power supply
Can u please give link for the circuit diagram
all about in this project given on video description section
can u upload a picture of the circuit diagram
Already i have included connection Diagram on video
can we use gsm module sim 900
You can use. But make sure Connect proper pin configuration and declare on your code
@@InfiniteXpro bro send me module 900 connection fast
All connection same as previous module
How to connect with you
Hai
Hi can i use gsm module 900?
You can, but make sure proper connection and maintain each module data sheet.
Do I need change the code or same?
May be it will remain same.
@@InfiniteXpro thanks you so much i will try this project
Can you make the source code clear in the comments section
Can we use jio 4g sim card...in gsm module 800.
yes you can use but only for 2G network propose.
@@InfiniteXpro can you please provide me tha code the given zip isn't working
Sir what's the library to download
Hi, thank you for connected with us. Please write down what need to khow.
sir u have mentined int define buzzer but in video there in nothing abt buzzer
This is extra if you add buzzer in this project that might be use.
i want to thesis paper
Can you please send circuit diagram
Brother,How to interface gsm with arduino using i2c pins(like sim900a has i2c)?
Be SAFE..
Please send the code with it, because my sim900a doesn't show i2c address
bro please do reply...
what if there is no signal to send sms
You need to proper signal for sending sms.
Cannot access code
Sir lcd is not displaying the message .how I solve this problem plzz help.
Just adjust the potentiometer (that blue screw at the top) of the LCD module...
@@deekshanaa612 I adjust it but it was not working. ..
@@kittub2341 so maybe some fault with LCD display...
@@deekshanaa612 hmm thnx for your suggestion ...may be it will help me.
sir plese add buzzar this broject
Please send it sir in the comment
It's not there too
Why it is not sending message to my phone ? What is the problem? I did exactly like how you did , HELP ME 😭
Do you understand now ?
please charge ur phone
pls send me output diagram