Arduino Fire Alarm Project Using MQ2 Gas and Flame Sensor
ฝัง
- เผยแพร่เมื่อ 15 พ.ค. 2024
- This project interfaces Flame Sensor and MQ 2 Gas Sensor with Arduino and learns about all the procedures needed to develop Arduino Fire Alarm System. The flame sensor module has a photodiode for light detection and an op-amp for sensitivity monitoring. It is used for fire detection and makes a HIGH signal. Arduino detects the signal and alerts the buzzer and LED by turning it on. The flame sensor utilized is a flame sensor based on IR.
The MQ 2 sensor has an electrochemical sensor that varies its resistance to different flammable gas concentrations.
Components Required for Arduino Fire Alarm Project:
1. Arduino Uno × 1 amzn.to/3mYHkAN
2.MQ-2 Gas & Smoke Sensor × 1 amzn.to/3zYfAT1
3. Flame Sensor × 1 amzn.to/3zYfAT1
4. LED and resistor kit × 1 amzn.to/3eej3CU
5. Buzzer ×2 amzn.to/3xL0QFc
6. Breadboard × 1 amzn.to/2RLJpEM
7. Jumper wires kit × 1 amzn.to/2QEE41B
8. USB cable type A/B × 1 amzn.to/3mYQNrP
Arduino Fire Alarm Code, Circuit Diagram, and much more:
► arduinopoint.com/arduino-fire...
Visit www.arduinopoint.com for more projects.
Like my page on Facebook:
► / arduinopoint
Follow me on Twitter :
► / arduinopoint
#Arduino_Project #Arduino_Fire_Alarm #Flame_Sensor - วิทยาศาสตร์และเทคโนโลยี
Are you using an active buzzer or a passive buzzer?
Hi can the same code used for esp32?
how can i adjust the value of the gas sensor threshhold so the buzzer and led will react when the MQ2 led is on?
Can u please say that y u have set flamesensor =low though u have got flamepin value=1 in serial monitoe
Great project bro 👍
Thanks for your compliment, Bro 😍😍😍. It makes my day 😃😃😃.
Explanation good
Thanks for your compliment 😃😃😃.
Can i use arduino wemos d1r2??
i have done same as your but my led doesnt turn on can you help
why the gas sensor isn't detect, ledred1 and buzzer1 didn't work?
I do simulation using proteus
Check your threshold value, when use analog output. And adjust the sensitivity by rotating the preset knob, when use digital output.
And also check the Proteus support MQ2 gas sensor properly.
Code is not Working Properly , i Checked all the Connections thrice Flame Sensor , Mq2 , LEDs , Buzzers
Hello sir I have a question
Please sensor gas and sensor dht11 with arduino uno
Please how could I know all the material needed for the project u just did.
1 Breadboard
1 flame sensor
1 MQ2 smoke sensor
jumper wire (Male to Male similarly M to F )
led's
arduino uno
programming cable
Buzzer
this is all you need
I already gave the required instrument list in the description.
1. Arduino Uno × 1
2.MQ-2 Gas & Smoke Sensor × 1
3. Flame Sensor × 1
4. LED and resistor kit × 1
5. Buzzer ×2
6. Breadboard × 1
7. Jumper wires kit × 1
8. USB cable type A/B × 1
Its work with esp8366 module? Not included arduino uno
Yes. But you need to modify the code.
how to make the connections with nodemcu ??
nice
Glad you like it 🥳
how will you add an sms alert on this one
Wow! That's good. You are creative thinker. I didn't work on the idea. But this idea is good. You can try it using GSM module.
Let me know after finishing your creative project 😃.
Bro can the power give to this model by charger
Yes )no
Yes, you can.
@@arduinopoint001 thanks bro
The code is showing error please help me
Can we connect gsm sim800L module in it
And Lcd 16x2
Yes, you can. But you need to change the code according to the gsm module and LCD.
@@arduinopoint001 can you help me, can you share code for it hmm
Could you please upload the code. Its not accessible
Now it's accessable.
Why my gaspinvalue is too low it is on 35 how to make higher
Rotate the potentiometer to adjust the alarm on-off level.
Brother, code link is not working. Please help us to get the code
It's working.
CAN I GET THE CODE FOR THIS PROGRAM?
Code link is provided in the description.
@@arduinopoint001 it shows sites can't be reached it doesn't open.
@@diabolsensei No it's available.
hello i have question
Yes, you can ask the questions. What are the questions?
@@arduinopoint001 i make same project follow the video and make this but code time i use code and upload then code is uploaded but in arduino yellow light not and always red .... and i use arduino uno gital
Did Arduino code successfully uploaded?
Reply bro
Hello sir I have a question
Brother, code link is not working. Please help us to get the code
It's working.