Great video, thanks. I had a question about the switch wiring harness connected to the fuse block. I get that the (4) connectors are for the (4) switch blanks on the EPS model or the (3) included switches and (1) blank of the Deluxe model. Do you know what the wire pair without a switch connector in the harness that is labeled AS-1 supposed to connect.
Thank you for the advice. We have a nice warm shop with pretty much any tools we will be needing. Just hoping with the time and a great deal of patience that it will work as it supposed too. Do you have anytime spent with that heater kit? Just wondering how it works as far as heat, defrost the windshield and control of it? I appreciate your time
A question, I had a winch installed before I picked it up new from the dealer and I’m installing the fuse block now and don’t have that blue tap connection located near the battery, don’t know if this was something that was disturbed when they installed the winch.
That key on acc. connector behind the blue tape I think is only on the 2022 models. If you have an older model you can tap into your cigarette lighter wires for signal to the fuse block.
@@joshstifter4398, just hook the leads from the fuse panel to the second battery rather than the primary. Everything else you'd wire the same way as Max did in the video.
Why not just install the true dual battery setup with a stinger relay and fuse box of your choice 🤷🏼♂️ seems pointless to have another fuse box and only one battery
A second battery would be pointless. None of these accessories draw enough to make it necessary. Where is adding an extra fuse for each accessory definitely makes a lot of sense.
Awesome videos! I installed everything from your videos.
Glad you like them!
I have found this very informative, kinda similar parts for talon , I sure wish there was a video on the talon using factory honda components
Thank you for sharing
🇺🇲🤗🙏
👍
Where did you get the parts from? Thank you
@@johnhart7515 go to the Honda side-by-side website under accessories or visit your local dealer
Great video, thanks. I had a question about the switch wiring harness connected to the fuse block. I get that the (4) connectors are for the (4) switch blanks on the EPS model or the (3) included switches and (1) blank of the Deluxe model. Do you know what the wire pair without a switch connector in the harness that is labeled AS-1 supposed to connect.
No, I’m not too sure about that
@@Maxsmotoshop , its just a key on switched pair. Kind of like the others just without the connector.
Where do i find the pins for the connectors? My fuse block hss all dummy connectors installed. I would like to wire an accessory bjmper light to it
All the connectors come with the Honda accessories
But you can use these dummy connectors to wire in your own accessories
@@Maxsmotoshop I guess you have to pin them?
This video is really helpful. Did you install the heater kit yourself? Im going to try to install a heater kit im my 2021
Have fun about a 15 - 20 hour job
Make sure you install your heater first before any other accessories
Thank you for the advice. We have a nice warm shop with pretty much any tools we will be needing. Just hoping with the time and a great deal of patience that it will work as it supposed too. Do you have anytime spent with that heater kit? Just wondering how it works as far as heat, defrost the windshield and control of it? I appreciate your time
A question, I had a winch installed before I picked it up new from the dealer and I’m installing the fuse block now and don’t have that blue tap connection located near the battery, don’t know if this was something that was disturbed when they installed the winch.
The wires going to the battery will be red and black
That key on acc. connector behind the blue tape I think is only on the 2022 models. If you have an older model you can tap into your cigarette lighter wires for signal to the fuse block.
Where can I buy fuse box and bracket and harness
Go to the Honda side-by-side’s website or visit your local Honda dealership
@@Maxsmotoshop thank you very much. Have a great day.
Does this work with dual battery setup?
Yes
That should be one of your videos! Very informative! Great job!
@@joshstifter4398, just hook the leads from the fuse panel to the second battery rather than the primary. Everything else you'd wire the same way as Max did in the video.
Thank you…much appreciated!
Why not just install the true dual battery setup with a stinger relay and fuse box of your choice 🤷🏼♂️ seems pointless to have another fuse box and only one battery
A second battery would be pointless. None of these accessories draw enough to make it necessary. Where is adding an extra fuse for each accessory definitely makes a lot of sense.