Don’t miss out on the exclusive merch at www.robbylayton.com, where you can gear up with the latest apparel and accessories. Plus, every purchase enters you for a chance to win the iconic 1972 C10 truck giveaway!
Typical women from the front office. Always wanting something that she has no idea ABOUT, THEN DOESN'T WANT IT ONCE SHE GETS IT. She just has to be involved AND LOOK IMPORTANT.
I Love it when Demri helps work on stuff. She does a good job. You can tell she likes it and likes to learn everything about Vehicles and how to build them. Such a Beautiful and loving wife you have Robby.
methanol binds with water when it sits in the cold all winter and will turn to gelled alcohol and plugs EVERYTHING up. My uncle found that out the hard way when he left the fuel in the system all winter in his sprint car. It was SO fun to clean out.
Bombi says “Ahhhh floor food… What you thinks I am some kinda stray peasant? My food needs to be in a bowl, it’s in my contract. Also I’m not gettin chunky, dat’s my fwuffy winter coat!”: 😽
Seriously between Hector, Hillbilly, Shaun and Demri I cant work out who is the best. The whole damned team are funny, hard working interesting and generally awesome, as you Yanks say. And I always like a cameo appearance from Bombi.
When winterizing the alcohol fueled car drain oil and remove valve covers to allow alcohol to evaporate from valve train and prevent rusting.. Learned this from Steve Morris.😊
hi guys , try this next time you need to welds a gas tank , drain it then remove the sender unit ,attach a diesel car /truck exhaust to the filler ,start the engine and leave it running for a hour or more , it will remove all the gas fumes safely and also the heat will remove any remaining gas
These offroad builds (and King Fred) are all awesome! having the fantastic shop you have built and the having the G O A T fabricator in house. there's nothing you cant do.
I would use the exhaust gas from a running engine. You then pipe to flow the hot exhaust gas into the the fuel tank. This evaporates the water and pushes out the air to keep it from flaming up.
Put a hose down into the tank and fill it with exhaust from another vehicle. Once cabon monoxide is introduced it will not catch fire or explode while welding!
Hey Robbie ,you need to make removable mud/snow flaps to keep it from p]plastering the sides or not . looking good keep up the good work you work ethic is a lot like ours
If you have to weld on a gas tank you run a hose from a car exhaust into the tank after it has been emptied. Let the exhaust run for about 15 minutes and you can weld with no explosion. No oxygen = no explosion.
17:00 You can weld fuel tanks without washing the fuel first. Inert gasses like CO² or even exhaust gasses will prevent an explosion by lowering AFR (Air Fuel Ratio) well below a combustible mixer. I watched as my friend Tommy welded his 57' Jeep tank.
For the first time in my life, I ordered something from a TH-camr. No offense I’m not a big merch fan. I’m like a T-shirt and jeans guy from the Goodwill, All my stuff gets ruined pretty quick working. But dang if I didn’t spend 20 bucks for a T-shirt so I could get a chance at that Chevy. Thank you.
The typical "proper" way to weld on any metal gas tank is to fill it up with argon, nitrogen, carbon dioxide or any other noble gas, depending on what you have around. Some people run a hose from a running engine's exhaust into the tank while they weld to prevent explosion. Water can work if you have a decent welding machine, but it tends to cool the weld too much when welding aluminum. A decent weldor can compensate for this, if they need to.
Have you thought about putting a breather in a hose joiner and putting that into the filler hose if it works itl save welding a fuel tank and its kinda the same as being in the tank
Put some anti seize on those belly pan bolts. Those things get stuck and you're using a hole saw to get them out. Don't ask me how I know (H1 rocker panel protection plates)
Hi guys, don't ask me how I know but flushing the gas tank with cold water isn't always enough to make the tank gas free. The best way is to fill the tank with cold water to the absolute top and drain, next fil the gas tank to the absolute top with warm water, as warm as you can get, then empty the tank. That should do it for you. The warm water will vaporise any fuel pockets remaining.
Robby hope you read this for Hector Earphone Translator Headset ,Smart Multi-Language Translation Bluetooth Wireless Earphones, Bluetooth Headset That Supports Translation into 144 Languages, Online or Offline Translation amazon
if you're gonna mix blue and red then you should just invest in some green loctite, also known as retaining compound. for when you never want the bolt to move again
"No Ka- Boom?...There should be an Earth shattering Ka-Boom.."(Marvin the Martian). That looked so fun that I can't wait to watch you do it again. Next time it'll be the transmission too ;)
Don’t miss out on the exclusive merch at www.robbylayton.com, where you can gear up with the latest apparel and accessories. Plus, every purchase enters you for a chance to win the iconic 1972 C10 truck giveaway!
even I knew that
how much for the bread van??!!!
Too late now but you could have cut a vent in the filler neck😂😂😂😂😂
Damn Sean's an artist when it comes to metal. It's really impressive.
Hillbilly schools us on tire repair.
But apparently Hillbilly doesn't know the difference between a valve stem and a valve core. @randyhome1544
Hector bring a whole new dynamic to the videos dont ever stop I'm loving it.
Sean---you're the artist! (Could feel your pain when Demri suggested getting a new tank.)😅
Typical women from the front office. Always wanting something that she has no idea ABOUT, THEN DOESN'T WANT IT ONCE SHE GETS IT. She just has to be involved AND LOOK IMPORTANT.
@@billb412Take it easy Francis!!
Viva, Hector! Hillbilly and Hector teaching each other their language is freakin hilarious!
Hard agree.
MORE HECTOR PLEASE..... HE'S A RIOT😂😊🤣😆
Know it has been said a bunch, but Sean is a great addition to the team. And Hector is a hoot.
Sean and the crew are doing a banging good job,,Thank goodness for Hector for helping and sharing a laugh..
Love Hectors exuberance
I think Hector speaks perfect English, he just likes messing with Hillbilly.
He did say that one video
Shawn is an ARTIST!
I Love it when Demri helps work on stuff. She does a good job. You can tell she likes it and likes to learn everything about Vehicles and how to build them. Such a Beautiful and loving wife you have Robby.
Sean makes an engine cover Art !
Hillbilly = beast.
Next T- shirt… I would buy one
Everybody needs an amazing Owen in the shop!
Why are you working on the Bread Truck? You should be giving Whiskers some love doncha think?
Don't you listen? The bread van is scheduled to be used camping in a month ?
@@delbutler885 In a month, they are going to need Whiskers to recover the Bread Truck😄
methanol binds with water when it sits in the cold all winter and will turn to gelled alcohol and plugs EVERYTHING up. My uncle found that out the hard way when he left the fuel in the system all winter in his sprint car. It was SO fun to clean out.
Sean you are the magic man.... I can see why you kill it at SEMA
Bombi says “Ahhhh floor food… What you thinks I am some kinda stray peasant? My food needs to be in a bowl, it’s in my contract. Also I’m not gettin chunky, dat’s my fwuffy winter coat!”: 😽
Alex was overwhelmed today with messages. It was hilarious. Thanks for the shout out!
It's great to see the team getting it done!
Thank you all!
I hope the bread van delivers!
But no hot rolls, please. We are still sad about the scrapes from the rocks.
You both should be a double-act! Very droll indeed!
Hector is the best.
Seriously between Hector, Hillbilly, Shaun and Demri I cant work out who is the best. The whole damned team are funny, hard working interesting and generally awesome, as you Yanks say.
And I always like a cameo appearance from Bombi.
he's a cool dude
@@leosmith848 And Colton as the glue to make everything work and bring us the footage.
Hi Hector!!! 🤚 😂
That was a good cover Robby, protecting Demri’s head . Slowly but surely. 🤙😎
You go Hector that was funny
He makes more sense than spill biily.
Robby you have an Amazing Team!!! The way they all work together and respect you speaks volumes about your Leadership sir.
Let me state the obvious... Sean's skills are amazing.
Great crew work...Hector is great...Sean is the metal master...Owen is a great asset...Demri likes to pitch in...beutiful.
The attention to detail that went into the bread van is amazing. It had to be the best looking build
Hector's awesome .
Always great to see The Boss. Enjoyed watching Hillbilly and the crew. Expertly watched.
Hector is becoming my favorite dude now 😂
Is cool to see Hector & Hillbilly act like brothers 😂
The t shirt membership deal is a great idea!
When’s Hillbilly gonna get that Hector understands perfectly
i think thats just work place banter
@@Hootman865 I know, right?
Don’t you think if we all know….Hillbilly knows??
Yup
@@jhood758he's forgotten more than some peeps. know !
Sean is a star, and so is Hector! Actually everyone on the Layton team is a star in their own way!
Put dry ice in your tank.It'll push any vapors out then.Weld it dry ice is heavier than the gas vapors.It'll push all the gas papers out
Hector is a good guy. And funny too.
Great job guys. Thank you 😊
Twin sticks your gonna love the way it works. So much more depends and works so much better
Sean.... "Pull it out and I'll weld it"... Sean will fill tank with inert gas(argon) before welding to avoid boom!!!
In the 1970s I worked in a welding shop. We ran exhaust hose into the fuel tank and welded it. Without oxygen there is no KaBoom!
That's crazy.
When winterizing the alcohol fueled car drain oil and remove valve covers to allow alcohol to evaporate from valve train and prevent rusting.. Learned this from Steve Morris.😊
Great tyre fitting don’t forget you have added weight with the patch so it will need a rebalancing when refitting
Welding on gas tanks, simply run an exhaust hose into the tank, we do it all the time.
hi guys , try this next time you need to welds a gas tank , drain it then remove the sender unit ,attach a diesel car /truck exhaust to the filler ,start the engine and leave it running for a hour or more , it will remove all the gas fumes safely and also the heat will remove any remaining gas
Rinsing it out with water sounds a lot easier
You put dry ice in the tank.The evaporation is carbon dioxide.It'll displace the air, and you can weld on it safely
Awesome video Robby
All you have to do is purge it with shielding gas after you rinse it. And BTW, Sean is a god. That console is amazing!
Hector has been a great addition to your channel.
I love the bread van. It is lee git!!!
Looking at all your builds..I can hardly wait to see king Fred done then the Ole antique tow truck
Hahahaha!!! Robbie used his orange love glove on the boss!!!
You guys are great!!!
16:20 "Hello, Mr. George? How much you pay for the new guy?
Twenty bucks? No. Too much money." LOL! 😄
When Demri dropped the bomb at the end the and Sean started laughing, gold.
Bombi is just bulking up for the winter
Bless you Demri
These offroad builds (and King Fred) are all awesome! having the fantastic shop you have built and the having the G O A T fabricator in house. there's nothing you cant do.
Hector is quickly becoming my favorite person on the show. It looks like Saun is thankful someone else takes the camera time! haha
Looks like the bread van had a baby!
I would use the exhaust gas from a running engine. You then pipe to flow the hot exhaust gas into the the fuel tank. This evaporates the water and pushes out the air to keep it from flaming up.
Put a hose down into the tank and fill it with exhaust from another vehicle. Once cabon monoxide is introduced it will not catch fire or explode while welding!
Love hector. You guys should take some Spanish lessons so you can incorporate him more.
Sean,Shon, Shawn looked so disapproving at those penny stacks..😂
Hector always makes this old man laugh, I am glad he has become a regular on the show.
Ain’t gunna lie Hector is quickly becoming mi favorito!
Hey Robbie ,you need to make removable mud/snow flaps to keep it from p]plastering the sides or not . looking good keep up the good work you work ethic is a lot like ours
If you have to weld on a gas tank you run a hose from a car exhaust into the tank after it has been emptied. Let the exhaust run for about 15 minutes and you can weld with no explosion. No oxygen = no explosion.
what? What? WHAAAT? errbody callin my name, man
17:00
You can weld fuel tanks without washing the fuel first. Inert gasses like CO² or even exhaust gasses will prevent an explosion by lowering AFR (Air Fuel Ratio) well below a combustible mixer. I watched as my friend Tommy welded his 57' Jeep tank.
Welcome to the Robbie Layton language lab
For the first time in my life, I ordered something from a TH-camr. No offense I’m not a big merch fan. I’m like a T-shirt and jeans guy from the Goodwill, All my stuff gets ruined pretty quick working. But dang if I didn’t spend 20 bucks for a T-shirt so I could get a chance at that Chevy. Thank you.
hillbilly is the man!
The typical "proper" way to weld on any metal gas tank is to fill it up with argon, nitrogen, carbon dioxide or any other noble gas, depending on what you have around. Some people run a hose from a running engine's exhaust into the tank while they weld to prevent explosion. Water can work if you have a decent welding machine, but it tends to cool the weld too much when welding aluminum. A decent weldor can compensate for this, if they need to.
I'm way up notrth in BC and it hasn't even threatened to snow yet. The snow line is way above 3000f.
"Michael Jackson it"...haha XD
1:40 - Honestly, if the zombie apocalypse hit today, I’m riding shotgun in this van! Who’s with me? 💪🚐
Hi Hector!
Have you thought about putting a breather in a hose joiner and putting that into the filler hose if it works itl save welding a fuel tank and its kinda the same as being in the tank
Put some anti seize on those belly pan bolts. Those things get stuck and you're using a hole saw to get them out. Don't ask me how I know (H1 rocker panel protection plates)
You just run your exhaust into the tank when it's empty the heat and fumes from exhaust will neutralizer the gas fumes
Damn Sean outstanding work brother
I like seeing Owen on your team. I believe he is a great asset to the team.Thanks for bringing him on.
Hi Hector !!!!!!!!!!!!!!
When welding on gas tanks put dry ice in it the carbon dioxide will fill the tank then weld on it
I’ve seen filling the gas tank with exhaust gas. Run a hose from the exhaust into to filler and fill the tank with exhaust gas.
LOOKING GOOD
Where’s the CC option? I need it to understand Hillbilly. 😄
Well you made progress !
porfa no desactives subtítulos!!! gracias! abrazo grande!!
I agree.
you're going to be an awesome Dad Owen.👍
Use an inert gas (CO2, Argon) to fill the gas tank before welding on it, much better than water.
Shawn is Master Class. And you guys are good too. The boss is cute !
Hi guys, don't ask me how I know but flushing the gas tank with cold water isn't always enough to make the tank gas free. The best way is to fill the tank with cold water to the absolute top and drain, next fil the gas tank to the absolute top with warm water, as warm as you can get, then empty the tank. That should do it for you. The warm water will vaporise any fuel pockets remaining.
Robby hope you read this for Hector Earphone Translator Headset ,Smart Multi-Language Translation Bluetooth Wireless Earphones, Bluetooth Headset That Supports Translation into 144 Languages, Online or Offline Translation amazon
Dang Shawn that looks nice
That is a good looking rig.
You got to c-25 or Oregon you fill the tank with gas and weld
if you're gonna mix blue and red then you should just invest in some green loctite, also known as retaining compound. for when you never want the bolt to move again
Robbie, put Rear steer into this please, would be wonders in the wilderness
"No Ka- Boom?...There should be an Earth shattering Ka-Boom.."(Marvin the Martian).
That looked so fun that I can't wait to watch you do it again. Next time it'll be the transmission too ;)