@BeardMan01 😂😂 I was just thinking to myself it would really suck to be the guy that has repack/grease this monster. Grease supplier on the other hand…💰💰
@BeardMan01 Grease LOL. When Fresh Kills Landfill was open. There were 260 Tractor Operators running more than 130 pieces of equipment 24/7. Just think of the fuel bill. LOL I remember working one night, and the big O&K 350 exvavator broke a hydraulic line internally. The machine was used to unload the garbage barges, but couldn't work. They walked the machine about 10 feet before it shut down because of lack of hydraulic fluid. They brought in pallets of 55 gallon drums of hydraulic fluid and refilled the machine, so they could walk it another 10 feet. They refilled the excavator several times, before they could get it out of the way, so they could bring in a fresh machine to continue digging the garbage. They did this without blinking an eye. You could build a house, with the cost of wasted hydraulic fluid. But, getting rid of the garbage is more important than saving money.
@@PhillipMoore-vj6cc " But, getting rid of the garbage is more important than saving money. " Keeping the operation running saved far more money than the wasted fluid. Why you are an operator and not a manager.
@theboringchannel2027 Nah! It wasn't that deep. It would not stop the whole operation, just that "pad" (barge unloading location). There were 4 pads and two truckfills running 24/7. With about 70 or so barges, that were constantly being filled and emptied. At any given time there would be 7-10 barges for each pad waiting to be unloaded. One time, I was on a 992 loading payhaulers when a boss came out and stopped me. "This lady here, accidentally dropped her diamond ring in the garbage. By the time she realized it, the garbage in her area was already collected. As the crane dumps a bucket into the pit, (The working floor.) I want you to spead it out so we can look for it." Four hours later, they found her ring. So money wasn't a factor. They just add a few more barges to the que. Which doesn't effect the system overall. The reason that the night bosses wasted all that hydraulic fluid, was because of inexperience. Had the same incident happened during the day shift. They would have shut the "pad" down until the excavator was repaired (1 day). Incidentally, I didn't know that they tracked the garbage so closely. This lady was very lucky. Once the garbage goes onto the active "bank" to be buried, it's gone forever. The police have tried several times to set up an operation to find a body or other evidence. (Replete with hazmat, and tyveks, etc. too funny.) They never found anything, but they tried.
Soooooo, 13 minutes to knock the dirt off. I worked at Fresh Kills Landfill for 28 years as a Tractor Operator. We also has water cannon stations. But, after a machine leaves the water cannon, it is brought to the back of the shop. Where an attendant will spend another 1-2 hours going over it with a steam jenny. ALL of the compartments must me opened up and cleaned. Dirt gets everywhere, not just on the undercarriage. At Fresh Kills, no dirty machine is brought into the shop, for servive or repairs. The only time mechanics work on dirty machines, is in the field. Even then, if it can't be fixed in a shift, the machine is brought to the water cannon to start the cleaning process, so it can be brought into the shop.
That sounds like an awesome policy made by someone who understands what it’s like to work of filthy equipment. Landfill debris isn’t just mud, and it’s probably a health hazard.
@OoavastoO Fresh Kills is the "waterway" right next to the Landfill. Fresh Kills (the waterway) separates Staten Island (NY) from New Jersey. The waterway is called a "Kill" because that is Dutch. The original settlers of New York were Dutch and called New York, New Amsterdam. There are many streets and places on Staten Island that still retain their original Dutch names. The House where George Washington used to have his meetings (during the Revolutionary War) is still available to visit. So the "Dump" was named after its location.
I worked at a mine in Montana for close to 5 yrs. We had a big wash off rack like this one. It made working on equipment in the shop a whole lot easier once the equipment was cleaned up.
Some people know how to clean things properly, others clean but it’s not that clean, but this team smashed it, just need 1lt of wd40 to stop it from rusting, Grest job
Previously we made the floor with small plates and then planted them, the results were not good. Now we use a wider plate, which turns out to be more durable.
I love and hate pressure washing. It makes it seem easy, but then comes the downside you dont see. It forces grit INTO all the seals of bearings and other shaft seals. You cant just pray and spray . you have to be conscious of certain areas to avoid !!! Like the plague!!! Anywhere on the front of the engine esoecially near crankshaft or the rear trans-outputs, or the hydraulic seals on the cylinders, or the bushings that ALL have to be greased now...Sigh. I ended up mixing 1/4 waterproof marine grease, 1/4 anti seize, and 1/2 high quality waterproof wheel bearing grease, mixed well and applied to all bushings , pivots links , anywhere it moves or rotates. (except a high speed bearing!) The anti seize residue lets parts move when the grease is all dried and washed out. If you hear it squeak, immediately go into shop , regrease and its all fine! This literally 10x the lifespan on my machines. Dorks with cannons...yeah. Spraying a 1/2 mill machine like ...dorks. Then again you can eat off my machines. Im picky .
Actually in terms of payroll it’s 39 minutes…2 laborers & 1 Operator…which IS likely 1.5 hours inclusive of prep… Union shop…that’s $175 inclusive of burden🤷♂️
On machines that size I doubt you could bend the fins with that kinda water after it went through the grill. I may be wrong but I have washed small cat machines my whole life with a 4000 PSI pressure washer and never had a problem directly hitting the rads.
Thank You. What you need to pay attention to is the unit whose fan is outside the radiator. When the engine is running, avoid flushing it with high pressure. The fan leaf can shake, come into contact with the radiator, causing the fan to break.
Your grease supplier and his family thank you for cleaning this way.
@BeardMan01 😂😂 I was just thinking to myself it would really suck to be the guy that has repack/grease this monster. Grease supplier on the other hand…💰💰
You’re supposed to grease every day. No grease inside bushings was removed anyway. Loose grease was washed off and that’s good
@BeardMan01 Grease LOL. When Fresh Kills Landfill was open. There were 260 Tractor Operators running more than 130 pieces of equipment 24/7. Just think of the fuel bill. LOL I remember working one night, and the big O&K 350 exvavator broke a hydraulic line internally. The machine was used to unload the garbage barges, but couldn't work. They walked the machine about 10 feet before it shut down because of lack of hydraulic fluid. They brought in pallets of 55 gallon drums of hydraulic fluid and refilled the machine, so they could walk it another 10 feet. They refilled the excavator several times, before they could get it out of the way, so they could bring in a fresh machine to continue digging the garbage. They did this without blinking an eye. You could build a house, with the cost of wasted hydraulic fluid. But, getting rid of the garbage is more important than saving money.
@@PhillipMoore-vj6cc " But, getting rid of the garbage is more important than saving money. "
Keeping the operation running saved far more money than the wasted fluid.
Why you are an operator and not a manager.
@theboringchannel2027 Nah! It wasn't that deep. It would not stop the whole operation, just that "pad" (barge unloading location). There were 4 pads and two truckfills running 24/7. With about 70 or so barges, that were constantly being filled and emptied. At any given time there would be 7-10 barges for each pad waiting to be unloaded. One time, I was on a 992 loading payhaulers when a boss came out and stopped me. "This lady here, accidentally dropped her diamond ring in the garbage. By the time she realized it, the garbage in her area was already collected. As the crane dumps a bucket into the pit, (The working floor.) I want you to spead it out so we can look for it." Four hours later, they found her ring. So money wasn't a factor. They just add a few more barges to the que. Which doesn't effect the system overall. The reason that the night bosses wasted all that hydraulic fluid, was because of inexperience. Had the same incident happened during the day shift. They would have shut the "pad" down until the excavator was repaired (1 day). Incidentally, I didn't know that they tracked the garbage so closely. This lady was very lucky. Once the garbage goes onto the active "bank" to be buried, it's gone forever. The police have tried several times to set up an operation to find a body or other evidence. (Replete with hazmat, and tyveks, etc. too funny.) They never found anything, but they tried.
13 min clean up in an 8 min video? Great efficiency!
🙏
Soooooo, 13 minutes to knock the dirt off. I worked at Fresh Kills Landfill for 28 years as a Tractor Operator. We also has water cannon stations. But, after a machine leaves the water cannon, it is brought to the back of the shop. Where an attendant will spend another 1-2 hours going over it with a steam jenny. ALL of the compartments must me opened up and cleaned. Dirt gets everywhere, not just on the undercarriage. At Fresh Kills, no dirty machine is brought into the shop, for servive or repairs. The only time mechanics work on dirty machines, is in the field. Even then, if it can't be fixed in a shift, the machine is brought to the water cannon to start the cleaning process, so it can be brought into the shop.
thank you for sharing your experience
That sounds like an awesome policy made by someone who understands what it’s like to work of filthy equipment. Landfill debris isn’t just mud, and it’s probably a health hazard.
I’m more curious who named a landfill “Fresh Kills”?! Sounds like somewhere the mafia takes all their mob hits 😂😂
@OoavastoO Fresh Kills is the "waterway" right next to the Landfill. Fresh Kills (the waterway) separates Staten Island (NY) from New Jersey. The waterway is called a "Kill" because that is Dutch. The original settlers of New York were Dutch and called New York, New Amsterdam. There are many streets and places on Staten Island that still retain their original Dutch names. The House where George Washington used to have his meetings (during the Revolutionary War) is still available to visit. So the "Dump" was named after its location.
Were you still at Fresh Kills when it reopened?
A clean Cat is a happy Cat
🤣🙏
Помыли лапки и домой😂
Класс! На таком предприятии техника наверняка обслужена как надо и работает дольше👍
🙏
Do you grease up all the fittings after the Jet Wash ? This is cool to see !
Manual Grease
@@KaharBakri Yes Sir , Appreciate your reply.
Paling suka kalau lihat kendaraan tambang atau truk" besar bersih 👍👍👍
makasih
I worked at a mine in Montana for close to 5 yrs. We had a big wash off rack like this one. It made working on equipment in the shop a whole lot easier once the equipment was cleaned up.
🙏
Superb. No shitty music. No music at all. Whoop whoop.
thanks
We got the sweet song of the backup alarm that will do.
سبحان الله وبحمده سبحان الله العظيم 🌹
I watched the whole thing, I need to get a life
thanks
so did 256k others so this is your life
No music…we got a life
1/2 an olympic size pool of water was used, sweet!
🙏
When he tilted the blade....like a puppy, don't forget, you know, under there. Lol
😄
Very satisfying video
thanks
The chit we watch sometimes. 😂😂😂😂😂😂
thanks
No music made it unchit
awesome n so satisfying
thanks
That’s a lot of pressure.
I’m surprised it doesn’t break a hose, fitting or wiper blade.
Very impressive.
Yes. But this is for maintenance and not daily cleaning.
🙏
I really enjoyed watching that.
thanks
Only thing I keep thinking is ‘dont cross the streams!’
how do the tracks move and it doesn't..is it on a lift..?
install the stand on the counter weight, press the blade slightly. then it will run in place
Some people know how to clean things properly, others clean but it’s not that clean, but this team smashed it, just need 1lt of wd40 to stop it from rusting, Grest job
🙏
Where do I apply for this job!?
Semangat bang
makasih
What model of Karcher is it??
asyik, main air
basah kuyup
You missed a spot....
Satisfying liat nya
thanks
Atlantic ocean has left the building
🙏👍
so satisfying to watch haha
thanks
...and I have to have a water saver on my shower...
They recycle the water defus
Sedep di lihat brow auto subrek..
makasih
This was so satisfying and comical at the same time.
thanks
Wouldn’t it make sense to industrial coat these so the dirt comes off easier ?
tekanan air nya wow..
jos
damkar Depok menangis liat ini😂
Anjir..... Wkwkkwkwkwkwkwkkw@@KnightMLOfficial
@@KaharBakri PDAM SENANG DENGAN MELIHAT INI😂😂 AIRNYA HABIS BANYAK BROOI😂
@@KnightMLOfficial🤦🤦🤦 TAPI PDAM SENANG DENGAN MELIHAT INI😂😂
I can't count the hours I've spent shoveling tracks lol this is nuts
That was so gratifying to watch…
thanks, sir
Where do I sign up for this job
This job is a wet booking 🤣🤣
Looks so fun
fun
How often ??
before entering the shop
Mantap
siap
7:21 even construction equipment has a bidet 😂
That concrete strength though, not even making a scratch on the floor when turning!
Previously we made the floor with small plates and then planted them, the results were not good. Now we use a wider plate, which turns out to be more durable.
@ ah ok makes sense. Thank you for clarifying. Great video!
thanks
Se realizar a limpeza todos os dias é isso mesmo, mas deixa esse barro secar aí pra ver kkkk
このような水圧でリップシールは耐えられますか？あなたの唇を閉じた状態で、どれほどの水圧に耐えて口の中に水を侵入させることができないか試してください
It's not like they are pointing the watter stream on a person here anytime.. and in the case if they did, his mouth would be his least problem.
Buat nyuci motor oke nih. 😁
boleh juga 🤣🤣🤣
Langsung kinclong
Perfection for breakfast
😁😁😁
Bisa buat mandi 1 kampung 😂
🤣🤣🤣
Tekanan air 11/12 sama PTO pompa truk pemadam
👍
Do you recycle the water!? Why can't the water pressure me more precise and sharp
Yes sir, we have an oil trap, several ponds and feasibility control before releasing it into the lake.
This is how we washed our tanks when I was a armor crew man
quick wash
I was always told that Cats lick themselves to keep clean.
🙏
50,000 gallons of water later...
tidak perlu shampo...
langsung bersih
Di Laila Shop kah bro
petea
Belly pans?
Later there will be special work, then we will remove and clean it
When these boys said they gonna build a wash stall they weren’t playing.
😄👍
Obvously no water rationing going on in that location
That high pressure water is great for the hydraulic cylinders....lol.
Fun...
thanks
Q fofinha, a máquina de meche pra lavarem ela
😀🙏
A lesson in volume vs pressure.
👍
Washpad plant site ini bang...????
petea. yang di p.site lebih besar lagi. dan beda sistem.
@KaharBakri ohhh iya bang, tau saya... Sering mampir di shop ini dlu klo mau jumatan
@a.iandchandra1181 👍
Like a mechanical crab enjoying a good wash
thanks
I love and hate pressure washing. It makes it seem easy, but then comes the downside you dont see. It forces grit INTO all the seals of bearings and other shaft seals. You cant just pray and spray . you have to be conscious of certain areas to avoid !!! Like the plague!!! Anywhere on the front of the engine esoecially near crankshaft or the rear trans-outputs, or the hydraulic seals on the cylinders, or the bushings that ALL have to be greased now...Sigh. I ended up mixing 1/4 waterproof marine grease, 1/4 anti seize, and 1/2 high quality waterproof wheel bearing grease, mixed well and applied to all bushings , pivots links , anywhere it moves or rotates. (except a high speed bearing!) The anti seize residue lets parts move when the grease is all dried and washed out.
If you hear it squeak, immediately go into shop , regrease and its all fine! This literally 10x the lifespan on my machines. Dorks with cannons...yeah. Spraying a 1/2 mill machine like ...dorks.
Then again you can eat off my machines. Im picky .
thanks
13 minutes and 900 litres of water
🙏
- Сколько воды вы потратили?
- да
Cat was purring as it went home
🙏
You should have bikini models working the hoses and shit you could make it a mud wrestling dozer wash 😅
Saya punya D10T2 bg😂, tapi diecast DM cat
mantap. lebih besar dari D8. tambang apa ya?. karna di tempat kami. ada juga D10 N. kalau yang di atasnya. tidak cocok. tanahnya lembek.
@KaharBakri saya punya diecast nya bg, miniatur cat ori untuk diorama tambanh
oo. ok. siapa tau bisa jadi besar😆😆
@@KaharBakri 🤣😆
I need a job like that lol
wet place
I’m surprised the radiator took all that.
Especially for machines whose radiator fan is outside, it should not be flushed with high pressure
Сальники и резиновые уплотнения от такого напора воды, «спасибо» не скажут точно
👍
Actually in terms of payroll it’s 39 minutes…2 laborers & 1 Operator…which IS likely 1.5 hours inclusive of prep…
Union shop…that’s $175 inclusive of burden🤷♂️
thanks for the calculations.
I'll be more worried bout the water bill
Kaya sy kenal, kayaknya di vale 😂
ssttt
@ keren bosku. Sukses terus kanal nya
aamiin makasih
Miss a spot
That's why oceans are drying fast
Yea they’re almost gone
Слишком много потери воды и очень грязно хотя и быстро ,можно не очень быстро но чисто и без потери воды но по времени займет чуть больше😊
👍🙏
L'eau utilisée c'est n'importe quoi, c'est pas une voiture. 🤢🤢🤮🤮
🙏
And 50 million gallons of water 😅
🙏
Si..e 20000 litri di acqua...magari potabile..🙈🙈
🙏
Помыл бы с губкой и ведром😂
🤣🤣🤣
Wondering how badly bent/damaged are the fins on the radiator with that kind of pressure.
we do not aim at the radiator with such pressure, if it is directed then the pressure is reduced.
On machines that size I doubt you could bend the fins with that kinda water after it went through the grill. I may be wrong but I have washed small cat machines my whole life with a 4000 PSI pressure washer and never had a problem directly hitting the rads.
Thank You. What you need to pay attention to is the unit whose fan is outside the radiator. When the engine is running, avoid flushing it with high pressure. The fan leaf can shake, come into contact with the radiator, causing the fan to break.
@@KaharBakri I never clean them while they are running so no problem there. But I can see how that would happen!
Yes sir, we have been using this method for decades. so far there have been no problems.🙏
Berapa biaya nya itu
alat ini dipakai di tambang. mau service jadi kita bersihkan dulu. biar kelihatan yg sdh aus atau rusak kita benahi.
Kalo dipake buat nyempot motor langsung pada rontok bodynya 😂
🤣
Your gonna need a bunch of WD-40 in the morning!
🙏
С засохшей гречкой в тарелке вряд ли справится
Let me know if your hungry, ill make you some cheese toasted sandwiches
Abis itu d lap'in bang pke kanebo😂
🤣
Abis di lap pake kanebo, lanjut di KIT biar kinclong
Покажите это GMA они а то 40 минут моют
👍
비효율
엄청난 자원의 낭비
인근 호수 수원지
@@KaharBakri
그럼
씻고 난 물은?
폐수처리 하면된다고?
100% 없는거 모르지?
그리고 항상 문제는 인간이다
제대로를 안하니
그러니 자원의 닝비라는거다
5000 gallons of water later, no wasteful at all !!
🙏
앞으로 가지를 못하는?
tonton yang lebih lama. bodynya terangkat, jadi tidak bisa maju. itu disengaja. jalan ditempat.
@@KaharBakri what??
You missed a bit.
🙏
čno presno
🙏
No more dirty boy lol
Do that to a ford truck and might fall apart 😂😂😂😂
🤣🤣🤣
Worst parents getting in between the grousers and chain links.
Wow what a mess. Get the grease gun out, boys. You also forgot the engine bay 😂
to clean the engine room. will be a mess. especially the undercarridge