धेरै राम्रो भिडियो बनाएर देखाउनु भयो दाजु, अनी यो स्पीकर को जाली च्यात्तीएको हुन्छ नी यस्लाई बजार बाट किन्नुपर्ने होकी, या घरमै बनाउन सकिन्छ भने यसको तरिका पनी सिकाउनुहोस ल।
यसको जाली (स्पाईडर) बजारमा पाउन सकिन्छ ।पाईएन भने घरमा बनाउन पनि सकिन्छ । भ्वाईस क्वाईल चै बजारमा पाईदैन आज्कल स्पीकर नै पाईन्छ नया नया ।तेही किन्नु उत्तम हुन्छ ।यो चाही एन्टिक सामान भएकोले मर्मत गर्दै राखियो ।पुरानो चिनो ।
Good video all the way up to the end, then a let-down. Would have been nice to demonstrate some music so we can see how clean it sounds. All we know for sure is it hums.
I am interested in re-winding bad voice coils, would have been nice to show how the coil was wound. Also how much length is needed to make either a 4 or 8 ohm coil!!!!!!!!!
thank you,you should mark only half length of coil moving height,half for movement.find out the depth where coil moves,and than mark at half length,and that is perfect for coil winding.
@@TMCreations I was about to, but then found myself a replacement that matched. it was 1 inch x 1 inch, 8 ohms, and had only 25% of the former wound with wire. Is there a set length to get 4 or 8 ohms or does that vary?
धेरै राम्रो भिडियो बनाएर देखाउनु भयो दाजु, अनी यो स्पीकर को जाली च्यात्तीएको हुन्छ नी यस्लाई बजार बाट किन्नुपर्ने होकी, या घरमै बनाउन सकिन्छ भने यसको तरिका पनी सिकाउनुहोस ल।
यसको जाली (स्पाईडर) बजारमा पाउन सकिन्छ ।पाईएन भने घरमा बनाउन पनि सकिन्छ । भ्वाईस क्वाईल चै बजारमा पाईदैन आज्कल स्पीकर नै पाईन्छ नया नया ।तेही किन्नु उत्तम हुन्छ ।यो चाही एन्टिक सामान भएकोले मर्मत गर्दै राखियो ।पुरानो चिनो ।
Fool using sticky tapes causes the balance of glue affect the movement of coil it means it influense performance
Thank you,but actually cellotapes does not affect so much than using pvc tapes.PVC has more glue and so I did not use it.
Good video all the way up to the end, then a let-down. Would have been nice to demonstrate some music so we can see how clean it sounds. All we know for sure is it hums.
Thank you....here is some demonstration at 3:45, th-cam.com/video/zwi-ltxx9qI/w-d-xo.html......
Time pass
I am interested in re-winding bad voice coils, would have been nice to show how the coil was wound. Also how much length is needed to make either a 4 or 8 ohm coil!!!!!!!!!
thank you,you should mark only half length of coil moving height,half for movement.find out the depth where coil moves,and than mark at half length,and that is perfect for coil winding.
@@TMCreations I was about to, but then found myself a replacement that matched. it was 1 inch x 1 inch, 8 ohms, and had only 25% of the former wound with wire. Is there a set length to get 4 or 8 ohms or does that vary?
Derai Ramro wow
Turn
Calculate the length of wire required by the resistance (4ohms or 8 ohms).Then you can make turn on half of that measurements.