My favorite researcher, the videos you posted to your channel are all helpful. Keep posting more…in the future, try to add a tutorial about pumping any fluid
Dear Mr Romuald, could you complete your project? I did it with the same model with a bit of changes in boundary conditions. I am planning to add this work on my eighth Udemy course. I will publish it within a short time.
Awesome, outstanding video! If you have the time, can you also explain what the values of turbulent energy and the force in the x direction mean and why their not as important compared to the torque value in the y direction?
Do you think this technique would work for simulating a oil pan on a car? I'm working on an fsae car and we want to simulate in cfd analysis the effect baffles would have on it.
There must be some problem either with the geometry or with the boundary conditions. Please check boundary conditions carefully. While performing internal analysis exclude cavities without conditions should not be checked. Check geometry & check the option "Improved geometry". If it is not solved, send the file in Parasolid format. I will check
i am working on sloshing for fuel tank..can you please share how to do meshing and how to directly import the model for simulate also share the process for doing sloshing
If you are having the model in other CAD Platform then you can save it to any Solidworks supporting extension like Parasolid or something supported with SolidWorks. Wgile meshing you can go for easiest option like global meshing with higher refinement level like 4 or 5
@@CFD_GUIDE Thank you so much for your prompt answer but i dont able to filling it up hence my model consist of fuel and air. Please guide for the same or share any tutorial so i can complete the project.
Your boundary condition is not clear. Car is initially moving with 40km/hr. Itvis OK but total duration is not provided and even 0.5*g force is provided on car. This is not clear. You can follow this video exactly excluding the boundary condition. As your BC is different. Perform 2 different simulations then its results can be compared from result analysis
I have a lot of videos containg conensation and evaporation. Actually in a refrigeration cycle cindensation and evaporation both takes place at different places. Plz check these videos provided as links
@@marwanmohamed8299 as a boundary condition only atmospheric pressure can be applied on any opening above the tank and to create a sloshing effect some kind of velocity or acceleration graph to be prepared based on actual data.
You can copy the property of any hydrocarbon like methane, ethane, butane etc. then change its property as per your requirement and use as a customised fluid.
Hello sir, great video. Where do i can download the solidworks files or could you send me the files? I want to try this by myself cause im still learning in solidworks. Thank you sir, have a great day!
My favorite researcher, the videos you posted to your channel are all helpful. Keep posting more…in the future, try to add a tutorial about pumping any fluid
Dear Mr Romuald, could you complete your project? I did it with the same model with a bit of changes in boundary conditions. I am planning to add this work on my eighth Udemy course. I will publish it within a short time.
@@CFD_GUIDE Thank you very much, yeah I am still working on it.
Awesome, outstanding video! If you have the time, can you also explain what the values of turbulent energy and the force in the x direction mean and why their not as important compared to the torque value in the y direction?
Thank you for the explanation and training
Do you think this technique would work for simulating a oil pan on a car? I'm working on an fsae car and we want to simulate in cfd analysis the effect baffles would have on it.
sir, in flow simulation, how to setup units for concentration in terms of mass fraction
As the tank accelerates in the x-direction, the liquid inside it should move in the negative x-direction. But in SolidWorks, it's not happening. Why?
I have stp format but there fluid body is not created , the geometry is non- uniform .. what is the way to apply fluid domain and follow the tutorial?
There must be some problem either with the geometry or with the boundary conditions. Please check boundary conditions carefully. While performing internal analysis exclude cavities without conditions should not be checked. Check geometry & check the option "Improved geometry". If it is not solved, send the file in Parasolid format. I will check
i am working on sloshing for fuel tank..can you please share how to do meshing and how to directly import the model for simulate also share the process for doing sloshing
If you are having the model in other CAD Platform then you can save it to any Solidworks supporting extension like Parasolid or something supported with SolidWorks. Wgile meshing you can go for easiest option like global meshing with higher refinement level like 4 or 5
@@CFD_GUIDE Thank you so much for your prompt answer but i dont able to filling it up hence my model consist of fuel and air. Please guide for the same or share any tutorial so i can complete the project.
It should be a free surface problem
Your boundary condition is not clear. Car is initially moving with 40km/hr. Itvis OK but total duration is not provided and even 0.5*g force is provided on car. This is not clear. You can follow this video exactly excluding the boundary condition. As your BC is different. Perform 2 different simulations then its results can be compared from result analysis
@@CFD_GUIDE yes it is free surface problem but how to fill hence i dont find any process for this.Please share if you have any
Hello sir, how do model the cylindrical tank? Can i have the stp file of the cylindrical tank?
Hi i am facing a problem I had created baffles using clone but the project 1 on which i have used clone is also converted into the baffle .
How to simulate water evaporation and condensation, and what is the name of the programs used in that?
I have a lot of videos containg conensation and evaporation. Actually in a refrigeration cycle cindensation and evaporation both takes place at different places. Plz check these videos provided as links
meet.google.com/obj-kprw-ydb
th-cam.com/video/XQGlGqQ6ozI/w-d-xo.html
How to draw indent you seperate air and propane in blue colour to draw it
Immiscible propane isn't appear at the customize parameter list ... any help ??
I'm using solidworks 2018
I am using SolidWorks 2020 version. It is not a customised here. In fluid library it is available
@@CFD_GUIDE
I have a project on tank sloshing and the results aren't reliable
what about boundary conditions ??
@@marwanmohamed8299 as a boundary condition only atmospheric pressure can be applied on any opening above the tank and to create a sloshing effect some kind of velocity or acceleration graph to be prepared based on actual data.
You can copy the property of any hydrocarbon like methane, ethane, butane etc. then change its property as per your requirement and use as a customised fluid.
Hello sir, great video. Where do i can download the solidworks files or could you send me the files? I want to try this by myself cause im still learning in solidworks. Thank you sir, have a great day!
Please write to me. I will provide the model