Came out better then I expected, Only suggestions I have is always cut out rusted and rotted metal and patch with new metal,and also use paper under the hood to prevent all the over spray that was all over the engine bay .
Pls wear a mask 😷 next time ... my lungs are itching just watching . great 👍 job on the paint job nice to see productive young men work . Don’t stop. All gas no breaks
Not sure if it’s a father or who the cameraman is but it’s really nice to hear all the encouragement and kind words towards their work ethic and final product. Keep it up 👍🏻
Gentlemen, I've taken the time to review others applying the rapture product. It's your energy and desire for perfection that's making others using the product nerves. I watched the class you attended on how to apply the rapture product. It's my opinion, your technique is full of energy and precision. others are not taking the steps your taking to accomplish the very high degree of complete application of Rapturing a vehicle. your coach is spot on, making sure your product is acceptable to the public. you've taught me what to look for in others. Your the best right now, stay in school , remain humble, listening to your coach. blessings men.
You guys seem to be doing a good job just a small tip whenever you’re sanding around the headlights or taillights or anything that wasn’t going to be sanded tape it out be more careful I noticed you sanded on the rear taillight a bit . But other than that keep up the good work
I would've removed the headlights and tail lights so the paint can wrap around the edge instead of having a sharp break, but everyone has their own method I suppose
Man this channel had so much potential; I could have seen them knocking on the door of 25 to 50k in subs, and potential collab videos with some HUGE youtubers Texas as well as setting up booths car shows. The sky was the limit here, you know you have something golden when you have someone willing to ship his rides from the east coast to Texas pre-covid.
Yeah, those kids may not smoke, but they’re getting 2-3 packs a day from that dust. It’s no joke, and irreversible. The cost of the respirator cartridges can be built into cost of job, still way cheaper than line-x.
Definitely wouldnt stick to bedliner. Was just thinking that myself as I read this comment. But then you'll have an ugly no paint spot if you'd ever take the emblems off. Kinda a loss in both scenarios unless you'd be okay with removing the emblems
Of course everyone will comment on how they would do the repairs on the roof a different and better way!! But when I see two young men earning money by working and trying so hard to better them selves!? then that’s a huge thumbs up!!! 👍🏼 you are doing way better then all those haters making negative comments!! do people really think Chip Foose started of knowing everything he does today!?!?! No way!! Good job guys,,,👍🏼👍🏼👍🏼👍🏼👍🏼🇺🇸🙏🏼
Good to see potential in these guys. First guys...get a mask.. Protect your health..... I'd remove lights, weather stripping and emblems too. Keep going guys.. Like the building
Good job guys. Read some of the comments. I think some of the guys that have been doing it for a while are leaving you some helpful tips. Remember there is always someone out there that knows more than the other guy. Subscribed to your channel. Keep up the good job
This is awesome guys! I am getting ready to do a 2001 Econoline but am going to do a metallic frost white. Great job gents. Be careful you don't get shut down over some bs about chemicals of business license! GOD Bless!
Are you guys still doing raptor paint jobs? I haven’t seen a new video in nearly a year. It would be a shame if you weren’t. These young guys are so talented.
No but I’m far from a pro and guess what, I had a hole in my roof of my car and I sure cut it out, welded in a patch and fixed it the right way. If you going to do work and charge people to do repairs why do it wrong. It’s one thing if you don’t know better but using the reasons of I don’t have the tools or anything like that means you shouldn’t be doing repairs
Have you guys done a darker grey yet ?? I'm restoring my lifted 2nd gen dodge ram and have it all tore apart bumpers off bed off I'm almost.dont grinding frame and painting with a self etching primer then a enamel base black metallic and I really wanna do raptor liner with darker gun metal grey but havent really been able to find the grey tint I want yet
That white looks awesome! Now I don't know if I should stay with my stock white or change to the Moab sand color for my 98 Jeep XJ. When could I schedule my Jeep? And I just supply the paint? Thanks, & keep up the great work!
I have a 2002 Jeep Grand Cherokee. How many bottles does it take for a truck this side? I’m about to order so I can do my own after watching your are by step series.
Can you be more specific on the type of sander you use, the grit paper, the type of fiberglass product you use, how much, when you paint, how many inches away you spray from?
Y'all need to get an eraser wheel for a drill to take off decals and pin stripping, and any other adhesive you need removed. They work awesome and don't cost much.
Hey man grey content! Do you etch prime before lining bare metal or is it fine? Also what size compressor do you recommend for just a one time use for raptor lining? You can always wait for it too catch up as long as it is quicker than the 60 minute hardening window right? Just trying to figure out if I’m prepared to sprat mine now that I’ve pretty much finished prepping for it! Great videos keep them coming
Hey brother thanks for subscribing and yes!! Definitely use etch primer on bare metal. We use a 30 gal compressor at 100psi and it works great without any delays, but yes you can give it breaks if your using a smaller one just keep an eye on your texture consistency due to loss of air pressure and you should be fine 👍🏻 RAPTOR ON BROTHER!!!!! 👍🏻👍🏻👍🏻👍🏻
Small tip for the z71 use an heat gun and gas wipe it with gas first then use the gun an then wipe it again it will come rite off the same with all the Emblems around so ya don’t have to kill yourself !!!
@@RaptorPaintJobsRGV just wondering, what is average.. Around about how much say the suv u just did, not counting the body work u did, just if u had to sand and spray
Hey Victor, what’s up Brother!!!! Sorry but we didn’t really check the tire size brother, it was a customers truck and we only did the raptor. We are located in Mcallen Tx. 👍🏻👍🏻👍🏻👍🏻
You guys did an amazing job next time take the emblems offI wish you guys were in Chicago with totally want you to paint my 1994 Silverado with 8ft bed
I’m not here to put no one down, just showing respect, i see two young fellas trying to make an honest living. Keep it up muchachos!
Thank you sir, 👍🏻👍🏻👍🏻
Good job keep it up
Came out better then I expected, Only suggestions I have is always cut out rusted and rotted metal and patch with new metal,and also use paper under the hood to prevent all the over spray that was all over the engine bay .
these guys are sent from above. NOBODY around me is doing this. God Bless these dudes.
Their the primos that do it for the low😂
Draztik Khaos still a great ass job 🙌🏼🔥🔥
Lmao. Too funny cause its true. Orale homes
Racist
They’re
@@crispedc they are
Pls wear a mask 😷 next time ... my lungs are itching just watching . great 👍 job on the paint job nice to see productive young men work . Don’t stop. All gas no breaks
Not sure if it’s a father or who the cameraman is but it’s really nice to hear all the encouragement and kind words towards their work ethic and final product. Keep it up 👍🏻
Gentlemen, I've taken the time to review others applying the rapture product. It's your energy and desire for perfection that's making others using the product nerves. I watched the class you attended on how to apply the rapture product. It's my opinion, your technique is full of energy and precision. others are not taking the steps your taking to accomplish the very high degree of complete application of Rapturing a vehicle. your coach is spot on, making sure your product is acceptable to the public. you've taught me what to look for in others. Your the best right now, stay in school , remain humble, listening to your coach. blessings men.
You guys seem to be doing a good job just a small tip whenever you’re sanding around the headlights or taillights or anything that wasn’t going to be sanded tape it out be more careful I noticed you sanded on the rear taillight a bit . But other than that keep up the good work
I would've removed the headlights and tail lights so the paint can wrap around the edge instead of having a sharp break, but everyone has their own method I suppose
You guys are incredible... young entrepreneurs. Dream BIG
Man this channel had so much potential; I could have seen them knocking on the door of 25 to 50k in subs, and potential collab videos with some HUGE youtubers Texas as well as setting up booths car shows. The sky was the limit here, you know you have something golden when you have someone willing to ship his rides from the east coast to Texas pre-covid.
Y'all need a mask when sanding bro it all effects u when you're older
@Barbosa Uribe you make us look dumb..... We don't do shot right 😂😂😂
@Barbosa Uribe if your a smart Mexican u do it right. L
Barbosa Uribe mannnnn 😂😂💯
Yeah, those kids may not smoke, but they’re getting 2-3 packs a day from that dust. It’s no joke, and irreversible. The cost of the respirator cartridges can be built into cost of job, still way cheaper than line-x.
Needed to cut the rust and weld small patch that’s the right way
it's an old car anyway. that is not very cost effective.
Love how hard these guys work! Is it perfect? No but dang it they are working their asses off and making money! Respect
Why don’t you remove the Yukon emblem and just put it back when you’re done painting
Santiago Martinez it wouldn’t stick
Definitely wouldnt stick to bedliner. Was just thinking that myself as I read this comment. But then you'll have an ugly no paint spot if you'd ever take the emblems off. Kinda a loss in both scenarios unless you'd be okay with removing the emblems
It would stick.. just have to warm up the double sided tape a bit
You fellas did a fine job. Looks great. You worked very hard. Good job!
Why wouldn’t it stick? Notice how they stuck the badges on rear
Best way to remove the sticker is with a heat a gun
I disagree, an Eraser wheel is much easier. Specially made for this application.
Ya after u remove it with a thin wire. Eraser wheel 👌🏽
BAC smells terrible lol but works
Not on a truck that old.
jerell hurtado meant the eraser wheel lol
Of course everyone will comment on how they would do the repairs on the roof a different and better way!! But when I see two young men earning money by working and trying so hard to better them selves!? then that’s a huge thumbs up!!! 👍🏼 you are doing way better then all those haters making negative comments!! do people really think Chip Foose started of knowing everything he does today!?!?! No way!! Good job guys,,,👍🏼👍🏼👍🏼👍🏼👍🏼🇺🇸🙏🏼
Thank you sir, your support means a lot to us 👍🏻👍🏻👍🏻👍🏻
We will continue striving and improving our skills
How many bottles of raptorliner did u guys use for the tahoe
I'm impressed, that came out amazing.
Awesome
Inspiring to all the young business starters, keep up the amazing work.
At video time 12:44... * “OH FUCK ... THE PROTECTION !! “ . That was epic
It came out looking awesome guys. Really nice job! Super clean.
These young cats are putting in work. Good on you
Honestly I was skeptical at first but it turned out fantastic. Y’all did a badass job
Saftey first guys! Glad to see yall taking that seriously!
Respect your guys work ethic raised right Latinos STAND UP. Respect from LHC, ARIZONA
thank you sir, we are just trying our best
Good to see potential in these guys. First guys...get a mask.. Protect your health..... I'd remove lights, weather stripping and emblems too. Keep going guys.. Like the building
Good job guys. Read some of the comments. I think some of the guys that have been doing it for a while are leaving you some helpful tips. Remember there is always someone out there that knows more than the other guy. Subscribed to your channel. Keep up the good job
thank you sir and yes, we take all honest advice into consideration and apply it
This is awesome guys! I am getting ready to do a 2001 Econoline but am going to do a metallic frost white. Great job gents. Be careful you don't get shut down over some bs about chemicals of business license! GOD Bless!
Please tell me how many quarts did it take for the Yukon please.
The way my guy put the bondo had me questioning the paint job but it came out pretty dope .
Thanks for your support brother
Raptor Paint Jobs RGV keep it up bro’s 💯
That fiberglass bondo is a bitch to spread. It's not like the pink stuff
awesome job, boys! Like seeing young guns getting into an honest work! keep it up, bros
Thanks for the support brother!👍🏼
You guys work hard. Nice work. i wish you alot if success.
hell yeah yall did a great job
I'm enjoying the videos. The vehicles are getting an awesome facelift. I would like to see the owner's reaction when the pick up their rides.
you've given me a idea for my rims here in Philippines.
Pretty good looking to be honest. I was skeptical at first but you guys did a good job.
Hoyes! put some Rapter gravel down to keep the dust down! Spray the gravel down with water then bring the Trocka in. Whallah!
you both did an amazing job.. I would def pay yall to do my yukon.. I subscribed to your channel
Wow that turned out great best one I've seen yet.
I give you guys the respect for trying keep up the good work !!
Wow, great job fellas. I like you, good honest hard working young men. I wish you lived around me, I would have you do my Tahoe.
That’s a banging job guys! I’ve been thinking of doing this to my 02 f350 most of my clear coat is peeling so it looks terrible.
Hey guys good job. Now i got a cuestión. Im trying to do my Crew cab Silverado 1500. How many bottles im gonna need?
Are you guys still doing raptor paint jobs? I haven’t seen a new video in nearly a year. It would be a shame if you weren’t. These young guys are so talented.
Ospho works well too. Local auto parts will have it
Slowly but surely my dudes 💯👊🏻
Thanks for the comment Mike 👍🏻👍🏻
Slowly, cool, calm and collected brother
I SEE YA DOING A GOOD JOB FELLAS👍💪💯💯💯
The kings of DIY!
Brother, your too kind!!!!!
We are just trying our best and learning as we go brother, THANKS FOR YOUR SUPPORT!!!! 👍🏻👍🏻👍🏻👍🏻
Why not cut out the rust and put a patch in?
No but I’m far from a pro and guess what, I had a hole in my roof of my car and I sure cut it out, welded in a patch and fixed it the right way. If you going to do work and charge people to do repairs why do it wrong. It’s one thing if you don’t know better but using the reasons of I don’t have the tools or anything like that means you shouldn’t be doing repairs
How much white paint y'all add to the raptor liner??. I wanna do that to my truck
Just take the emblems off and regule them later it takes more time not blowing it apart and going around by hand than taking stuff off
Omar Ramirez doubt it would stick back on raptor,liner tho
Looks amazing. Do the z71 stickers stick to the raptor paint very good? How much product did this tahoe take?
Mask ur face all the time, protect them lungs GOD only gave us 2 of them.
My god is a cashew
Wow you guys left this one freaking awesome
Have you guys done a darker grey yet ?? I'm restoring my lifted 2nd gen dodge ram and have it all tore apart bumpers off bed off I'm almost.dont grinding frame and painting with a self etching primer then a enamel base black metallic and I really wanna do raptor liner with darker gun metal grey but havent really been able to find the grey tint I want yet
Really nice I have Tahoe same color what size tires are those
What size kit did u guys use ( how many bottles) this is the same body as my 01 tahoe...i wanna do this in the lime green and black ..looks good guys
Is that Yukon lifted? Really like those wheels.
That white raptor line is legit
That white looks awesome! Now I don't know if I should stay with my stock white or change to the Moab sand color for my 98 Jeep XJ. When could I schedule my Jeep? And I just supply the paint?
Thanks, & keep up the great work!
Hello ma’am, please email us and we can give you info on how to schedule your jeep 👍🏻
Raptorpaintjobrgv
At gmail
@@RaptorPaintJobsRGV 03 Tahoe color change gold to gray
@@RaptorPaintJobsRGV Wanting to schedule
Fuego........... Nice job guy's
Nice work guys. Keep up the good work.
Thanks for the support brother!👍🏼
I have a 2002 Jeep Grand Cherokee. How many bottles does it take for a truck this side? I’m about to order so I can do my own after watching your are by step series.
I wouldn't paid outside at night.The bugs just love those lights!
How many bottle of the raptor liner did it take to paint it?
That looks great! Good jod boys.. Keep it up!
Awesome job guys!
How many bottles did it take to do that yukon?
How much do you charge for a truck that size?
looks great. good job!!
Im diggin the channel keep up the good production. Safety is key buy some mask like robles says
Can you be more specific on the type of sander you use, the grit paper, the type of fiberglass product you use, how much, when you paint, how many inches away you spray from?
Keep the sander flat
Nice job but you forgot the acid etch prime for the bare metal?
Y'all need to get an eraser wheel for a drill to take off decals and pin stripping, and any other adhesive you need removed. They work awesome and don't cost much.
Thanks for the suggestion brother, we’ve actually never tried that.
eBay should have them? Or do you find them local?
Raptor Paint Jobs RGV you can find them at advance auto. Take off decal glue in a few minutes.
Just about any parts store should have them or Amazon has them also.
Yo how much do u guys charge !!!! That's a fantastic job yall did
Sanding with fiberglass is very bad without a mask
Hey man grey content! Do you etch prime before lining bare metal or is it fine? Also what size compressor do you recommend for just a one time use for raptor lining? You can always wait for it too catch up as long as it is quicker than the 60 minute hardening window right? Just trying to figure out if I’m prepared to sprat mine now that I’ve pretty much finished prepping for it! Great videos keep them coming
Hey brother thanks for subscribing and yes!! Definitely use etch primer on bare metal.
We use a 30 gal compressor at 100psi and it works great without any delays, but yes you can give it breaks if your using a smaller one just keep an eye on your texture consistency due to loss of air pressure and you should be fine 👍🏻
RAPTOR ON BROTHER!!!!! 👍🏻👍🏻👍🏻👍🏻
Do you guys ever come to florida?
Keep the sprayer tip perpendicular to the surface as you move. Don't swing it in arc at the end of your strokes
Do you guys ever take off the bumpers? Keep up the good work.
Small tip for the z71 use an heat gun and gas wipe it with gas first then use the gun an then wipe it again it will come rite off the same with all the Emblems around so ya don’t have to kill yourself !!!
Looking good.. How much u guys charging to Raptor, no patch, just sand and spray..
Hey Jeremy, it depends what vehicle you got brother, what do you have?
@@RaptorPaintJobsRGV just wondering, what is average.. Around about how much say the suv u just did, not counting the body work u did, just if u had to sand and spray
We could do it for 650.00 including the raptor brother 👍🏻👍🏻👍🏻👍🏻
How many bottles were used to paint this gmc?
You all do real bad a$$ jobs, awesome!!!👍
Reach out to customer so y’all can share those rim&tire specs pleaseeee😬
I knowwwww I like that look
Nice job👍🏽 you guys keep it up
How many liters it take to do the whole thing
Looks good
What the size of the tires and wheels
Hey Victor, what’s up Brother!!!!
Sorry but we didn’t really check the tire size brother, it was a customers truck and we only did the raptor.
We are located in Mcallen Tx. 👍🏻👍🏻👍🏻👍🏻
Bf goodrich all terrain ko2 and judging by the height looks stock so maybe 30 inche
Was the intake box part of the paint job? Just asking
how many quarters to paint the whole truck?
Great job guys 👍
What size of air hose are you using?
How many cans does it take to do a Yukon
how far can u turn ?? looks like its gonna scrap the front bumper
Wait why wouldn’t u take the emblem off?? Haha or the mirror caps. They pop off
You guys did an amazing job next time take the emblems offI wish you guys were in Chicago with totally want you to paint my 1994 Silverado with 8ft bed
You guys made this look so easy...
You two do awesome work keep it up
Thanks for the support brother!👍🏼 We appreciate your support
How many bottles did it take? I have a supercrew f150, how many should I expect to use?
Hey Jeremy it should take you 8-10 bottles brother just buy 3 kits and you will be fine 👍🏻👍🏻👍🏻👍🏻
That’s badass you guys good job 👍🏼
Gracias hermano