Thank you so much!! I had some problems with the foil in the starting as well. This technique is time consuming but for me the chances of transferring the foil without any failure is really high.😊
Thank you so much! The resin did cover the middle section completely, the rhinestones on the ends are little protruding but are under the resin as well.
Good morning I have a question why you didn't use the UV lamp at the end instead of waiting 24 hours and why you don't use electric drill to make the hole
Hello! I didn't use UV lamp because it was not necessary here. UV resin requires UV light to cure but I have used two parts Epoxy resin here that cures in about 24 hours not under UV lamp. I did use UV resin while attaching the screw eye pins but it was too little that it cures itself after leaving in sunlight for a few minutes. Also, I don't have an electric drill. It would have made things easier but I am fine with using Archimedes Drill.
You can also use uv resin for this. Quick cure the resin so it is still tacky then apply the foil and cure again. Once the resin is cured remove the excess foil.
Thank you! I have done foil transfer with UV resin as well. It is surely a quick way but as UV resin is expensive, the glue technique is another way to do it in less cost even though it takes time. It is either time or the cost.
Beautiful, ❤❤❤❤❤❤
Thank you so much! ❤❤
My favorite is the pink one.
Thanks for sharing.
You’re welcome 😊
Usually I like blue on everything, and the blue one is really nice, but the pink one is so pretty.
Thank you so much!!
Bonsoir, puis je savoir avec quel produit fixez vous le transfert? Merci de votre retour 🌺
@@joselynerosinsky3291 J'utilise la colle de découpage Modge Podge pour transférer la feuille d'ongle.
They are very pretty! Thank you for Sharing! Liz.🇨🇦
Thank you! 😊
These are so cute!
Thank you😊😊
Bellissimo..con poco hai creato magnifici portachiavi..complimenti sempre creativo...😊 ciao
Grazie mille!! Dio vi benedica!!☺
Love these,great job😊
These are so pretty
Thank you!!
These Keychain are so pretty!!
Thank you so much!!
Magnifique merci pour ce partage
Merci aussi !😊
Every piece is wonderful!!!♡
Thank you!!☺
They're all beautiful. ❤
Thank you so much!!😊😊
Beautiful!!
Thank you! 😊
Extremely pretty ❤️
Thank you!!😊
I have had such problems with nail foils! You make it look easy! 😊
Thank you so much!! I had some problems with the foil in the starting as well. This technique is time consuming but for me the chances of transferring the foil without any failure is really high.😊
Those are beautiful
Thank you! 😊
Very pretty ❤
Thank you! 😊
Excellent pieces .❤❤❤
Thank you! 🤗
So well explained in detail.... would like to learn more through your videos ❤
You are welcome!! I am glad you like the video.☺
I'm going to try this with Elmer's clear glue
Good idea! Good luck!
omg so cute i have to try pouring that
Go for it!!👍👍
Wow these are gorgeous
Thank you!!☺
Thanks to explain in detail dear❤❤
My pleasure 😊
Very clever!
😁😁
Beautiful
Thank you 😊
Beautiful ❤
Thank you! 😊
ماشاءاللہ ماشاءاللہ بہت ہی خوبصورت ❤❤
شکریہ!!😊
Gracias... maravilloso
¡Gracias también!
When you applied the top coat of resin did it cover the rhinestones? They turned out beautifully.
Thank you so much! The resin did cover the middle section completely, the rhinestones on the ends are little protruding but are under the resin as well.
Sono bellissimi ❤️
Grazie!😊
I really like these. May I have your permission to try to make them for sale at a craft show?
Sure! You are most welcome to do so. 😊
@@CharmsDIY Thank you so very much!
Can one make use of resin itself if they don't have the glue?
If you are going to use resin only, this method will not work.
Good morning I have a question why you didn't use the UV lamp at the end instead of waiting 24 hours and why you don't use electric drill to make the hole
Hello! I didn't use UV lamp because it was not necessary here. UV resin requires UV light to cure but I have used two parts Epoxy resin here that cures in about 24 hours not under UV lamp. I did use UV resin while attaching the screw eye pins but it was too little that it cures itself after leaving in sunlight for a few minutes. Also, I don't have an electric drill. It would have made things easier but I am fine with using Archimedes Drill.
Absolutely stunning! I got a little confused, the foil goes on top of the mod podge?
Yes, the foil goes on top of the mod podge.😊
@@CharmsDIY thank you 😊
Me encantó pero dónde consigo ese pegamento su nombre
@@tersacervantes3810 Es un pegamento para decoupage. Puedes comprarlo online o en tiendas de arte y artesanía.
I love the music. It's mot distracting from the video. Beautiful keyring unique
Thank you!!
Can you try something else in place of nail foil and can we use fevicol if we don't have modge podge
Yes, we can use fevicol instead of mod podge.
@@CharmsDIY thank you for your reply
@@CharmsDIY thank you for your reply
Can you tell me how to get maritals in Nigeria
I get most of my materials online from Aliexpress.
Can we transfer the foil with resin? Plzz replyyyyy
Yes, you can use resin to transfer the foil but the process is different. You cannot use this method to transfer the foil with resin.
which colour you use what is the name of the colour powder
They are mica powders.
What kind of resin do you use?
Unfortunately, I can't tell you much. I get my resin from a local source. They get the resin in bulk and sell in small quantity.
❤❤
☺☺
and mould size
4.5 cm diameter.
How many grams of resin are you using?
About 24 gms resin.
Hi
Resin art ka saman kaha milega ma'am
Please bataiye
You can search them online on Amazon, Aliexpress or Flipkart.
How much each key chain?
2.5 to 3 dollars
One piece cost how much
2.5 to 3 dollars
You can also use uv resin for this. Quick cure the resin so it is still tacky then apply the foil and cure again. Once the resin is cured remove the excess foil.
Thank you! I have done foil transfer with UV resin as well. It is surely a quick way but as UV resin is expensive, the glue technique is another way to do it in less cost even though it takes time. It is either time or the cost.
Price please
Apology!😔😔 They are not for sale.
Very cute would be a nice way to make your rings too. Your music needs to be changed or use no music it’s putting me to sleep lol
Thank you!!☺
Hello my Egyptian
Hello!!
These are so cute!
Thank you!!😊