Hi I work in a production shop and recently started switching to iwata.. I grabbed a super nova for clear and what an opinion on a good quality base gun to get? Thx and love your content!!
What clear did you use on this job and what tip size for the Kiwami. I currently use the Tekna Clearcoat copper gun. I love it, but thought about trying the LPH 400 or the Kiwami 4
Great job, you made it look great and effortless laying down base and clear! Do you recommend this 1.3mm Kiwami 4 for base/clear? Not a pro, just a guy wanting to paint personal cars and have it come out good without having 2-3 guns hanging around., thanks!
From my experience, the Kiwami is great for the garage painter if used for basecoat. With the pressure turned down to around 20 psi, you will still have a nice fan and great atomization without clouding up the area. Higher pressures will tend to use more paint, putting paint into the air. It does well on clear, but again, it will require more pressure with the chance of putting out more overspray.
Since ive seen u use either spies hecker or standoblue 1,5 coat system... do you also have a problem with some whites and some reds (for example fine reds like the 1st stage of renaults NNP), causing silicones in the first coat of clear? Otherwise great vids, subscribed
Hey bud, so I'm running spies hitec 480, and have been having the same issue your talking about latest today..talked to my rep and it's from over-loading the basecoat, wind ya fluid needle in and adjust the pressure to suit and make sure to back your distance off abit awell. It seems to be predominantly blacks and blues and the odd red, which is the one I had happen today...depending on what gun you are running, and setup of course..hope this helps 🤘
It is an amazing spray gun. And for the price you cannot beat it! It sprays just as good as my other more expensive spray guns. I have the 1.3. I have tried it on a bunch of jobs and it has handled every one great. First was a big silver job. Haha.
Thank you! I have used it for clear and I love it. I actually use it for clear in my video I just uploaded of Mazda 46G. I will also be making a compilation of Kiwami for clear soon as well. Thank you for watching!
Honestly I’m not exactly sure. I haven’t been running a regulator on this gun. Have just been going off sound. But I’m gonna assume around 22-24. I run fluid wide open and adjusted fan to spray pattern. Not sure how many turns I have it out. But it is almost open.
I'm doing this 20-24 psi and wide open and our fan is shit . 6" log fan is best I can get and have to spray at like 6" off the car . My input pressur is 100 , regulator on the gun has to shooting at a consistent 20-23 but that all it varries .
GOT THE SAME GUN CARNT WAIT TO USED IT I WONDER IF IT BETTER THAN THE OLD DEVIBLISS GTI PRO BASE GUN HELPS ALOT MATE IF YOU PUT THE SETTINGS ON FOR THE BASE COATE AND THE CLEAR AS WELL ..
Fluid and fan I use same settings for clear. Pressure is maybe about 25. I don’t use a regulator anymore. But I’m gonna get one to show my exact pressure in videos.
Looks good I’ve been wanting to try out the Kawami4.And have you ever sprayed the wet bed on something only to see crap like a hair or bug fall into it?haha what a pain .
I would definitely recommend getting a 1.3 for basecoat. Mine is a 1.3 and I love it. It sprays everything very well. Thank you for watching and subscribing!
What is the CFM? Will it work on a 20gal Compressor
That gun is really cheap and worth it...you the reason why I will buy one to try it out !!!
You will love it! It’s a great spray gun. And you definitely cannot beat the price!
Hi I work in a production shop and recently started switching to iwata.. I grabbed a super nova for clear and what an opinion on a good quality base gun to get? Thx and love your content!!
nice work looks great ....would this be a good spray gun for a beginner i can get this spray gun for $250 in canada ..what are your thoughts...?..
Good gun at a reasonable price 💯👍🇺🇸🙏
Kiwami4 for Paint and lph80 for small repairs
Look at the ws400 go with the clear ! Good technique ! $200 Kiwami is super affordable I love my Bellaria it may last a lifetime
Question do you ever use that kawami for clear coat
Which adapter are you using on the kiwami 4?
What type of gravity cup to use for this gun
What clear did you use on this job and what tip size for the Kiwami. I currently use the Tekna Clearcoat copper gun. I love it, but thought about trying the LPH 400 or the Kiwami 4
Nice video! What you use for sealer? And what sealer you spray
I use my Sata 4000 for sealer for the moment. I spray 2 sealers, 5650 water sealer and 3302 direct to plastic sealer.
@@everyday_painter I also use my 4000 RP 1.3 for sealer .They are still great guns .What happened to your 5500s?
Hi is this model you bought KIWAMI4-13BA4?
Подскажи какие настройки? На Ивата
Great job, you made it look great and effortless laying down base and clear! Do you recommend this 1.3mm Kiwami 4 for base/clear? Not a pro, just a guy wanting to paint personal cars and have it come out good without having 2-3 guns hanging around., thanks!
From my experience, the Kiwami is great for the garage painter if used for basecoat. With the pressure turned down to around 20 psi, you will still have a nice fan and great atomization without clouding up the area. Higher pressures will tend to use more paint, putting paint into the air. It does well on clear, but again, it will require more pressure with the chance of putting out more overspray.
Since ive seen u use either spies hecker or standoblue 1,5 coat system... do you also have a problem with some whites and some reds (for example fine reds like the 1st stage of renaults NNP), causing silicones in the first coat of clear? Otherwise great vids, subscribed
Hey bud, so I'm running spies hitec 480, and have been having the same issue your talking about latest today..talked to my rep and it's from over-loading the basecoat, wind ya fluid needle in and adjust the pressure to suit and make sure to back your distance off abit awell. It seems to be predominantly blacks and blues and the odd red, which is the one I had happen today...depending on what gun you are running, and setup of course..hope this helps 🤘
Friend I have the kiwami 4 and I love it... I have the 1.4....Which tip do you have? I think it's one of the best spray guns...
It is an amazing spray gun. And for the price you cannot beat it! It sprays just as good as my other more expensive spray guns. I have the 1.3. I have tried it on a bunch of jobs and it has handled every one great. First was a big silver job. Haha.
@@everyday_painter this information very good..its help me to make decicions to buy kiwami 4..because like u said..its can handle silver paint easyly
Just ordered one!
Why do some of the Kiwami 4 spray guns do and some don't have a blue/green iridescent green tag or patch just behind the trigger?
They all should have the sticker. That is a stamp that Anest Iwata puts on all of their spray guns to show they are genuine products.
Can you comment on you airline. What type and if you use HF fittings??
And anything else? Thanks
Yes the regulator on the wall is prevost. Air house is prevost flex air and I do use high flow fitting on all of my spray guns.
What pps adapter are you using the S43 ? Thanks great work keep it up my friend.
Yes the s43. Thank you! Appreciate it. Thanks for watching!
Very nice job. Have you used Kiwami for clearcoat?
Thank you! I have used it for clear and I love it. I actually use it for clear in my video I just uploaded of Mazda 46G. I will also be making a compilation of Kiwami for clear soon as well. Thank you for watching!
@@everyday_painter thank you very much. I made a good decision subscribing.
Thank you for the support! I appreciate it! 😀
what psi were you spraying the kiwami 4 settings
Honestly I’m not exactly sure. I haven’t been running a regulator on this gun. Have just been going off sound. But I’m gonna assume around 22-24. I run fluid wide open and adjusted fan to spray pattern. Not sure how many turns I have it out. But it is almost open.
I'm doing this 20-24 psi and wide open and our fan is shit . 6" log fan is best I can get and have to spray at like 6" off the car . My input pressur is 100 , regulator on the gun has to shooting at a consistent 20-23 but that all it varries .
Is that hvlp or conventional.
It's conventional
Had my tekna gun stolen so these are comparable? Thanks 🤘🇨🇦
Clear with the Kiwami next time?
I will make one soon. Thank you for watching!
How is it spraying with a 1.5 tip? Do u have a video on one?
sprays good. really fast with good atomization
What is the model number
GOT THE SAME GUN CARNT WAIT TO USED IT I WONDER IF IT BETTER THAN THE OLD DEVIBLISS GTI PRO BASE GUN HELPS ALOT MATE IF YOU PUT THE SETTINGS ON FOR THE BASE COATE AND THE CLEAR AS WELL ..
You will love it. Kiwami I sprayed fluid wide open fan 3 1/2 turns out and psi around 22-24. Not positive on psi I was not running a regulator.
@@everyday_painter thanks for sharing that is that the same for clear coat paint kapci 6030
Fluid and fan I use same settings for clear. Pressure is maybe about 25. I don’t use a regulator anymore. But I’m gonna get one to show my exact pressure in videos.
Are you using the 1.3 tip?
yes
Looks good I’ve been wanting to try out the Kawami4.And have you ever sprayed the wet bed on something only to see crap like a hair or bug fall into it?haha what a pain .
It’s definitely worth it! Yes I have. Or to see a dirt smudge that was missed and now your screwed. Haha.
Great video. Would you recommend this gun with a 1.4 or 1.3 to spray a solid color maroon base coat
Just suscribes to your channel great work
I would definitely recommend getting a 1.3 for basecoat. Mine is a 1.3 and I love it. It sprays everything very well. Thank you for watching and subscribing!
Hey man great video! Where did you purchase this one? I want to buy and try it too.
Thank you! I actually got this on eBay. Brand new from a company in Japan. $230.
There are lots of them available on eBay. This sellers name was Paintingtool Japan. They had it shipped to me within a week.
That's a beautiful painting! Is the base WB?
Thank you! Yes WB basecoat. Spies hecker HiTec.
Also what’s you settings for the ws400 thanks
Ajj by out 29 psi fluid wide open fan about 3 1/2 turns out.
@@everyday_painter is that a 1.3 in that ws400?
1.4
Hi I Just Got This Gun Wher Can I Find Cup concter And Cups ?
Your local auto paint store should carry them. Also online. Amazon probably has them. Just have to get the part number.
Hillo sir, my compressor is 2hp
I was expecting more commentary along the work, but good job over all
Actived subtítle please 😭
Can this gun be used to primer and will the outcome be good
I want 1
Your the master 😅
1.3 or 1.4 tip?
1.3
Which kiwami model number?
Hi, what size nozzle on that gun?
Kiwami is a 1.3. Supernova is a 1.4.
@@everyday_painter Ok,thanks
Solvent?
Water. Spies Hecker HiTec.
axalta?
Yes. Spies Hecker HiTec.
Waterbase?
Yes