Another sublime piece. The amboyna burl was so gnarly at the beginning and yet its inner beauty shines through. When a skilled artist knows their materials, anything is possible.
Pokoknya gw akuin kalo anda ini master segment Woodturning Indonesia. Eh sorry dunia deh 👍👍👍👍 pokoknya berkarya terus bos tunjukkan kalo seniman kayu Indonesia bukan kaleng-kaleng 👌
It’s already clear your craftsmanship with wood is excellent, but it takes good videos to really show it here. Your videos are very well-thought-out, and they’re soothing to watch and listen to. Well done, mate. Thank you.
An artwork of absolute harmony and beauty! Only by watching the work in progress one can appreciate the ingenuity of design, the lot of preparation and finally the emerging of beauty in the turning itself and the final polish. You are a true artist and I bow in respect!
This has become a beautiful vase, Mayuko, breathtaking! What fascinates me most is the choice of wood types and the their combination. To me, that's proof of a skilled artist.
Very nice project. looks fantastic! Of course safety is each persons individual responsibility, but suggest you lower your saw blade down. you don't need that much sticking up above the top of your wood. Raise it just enough to clear the gullets of the blade :)
Thanks for retuning your answer. Just getting started in segmented bowls so it’s always interesting what you come up with. Do you primary use carbides.
I'm just getting into turning, and just found your channel. You've got some beautiful pieces. I have one question for you, why do you turn part of the jar first, then glue on more pieces and then turn some more. As opposed to gluing the whole jar up at once and then turning. Keep up the videos.
Thank you for watching my video, the reason is that if you turn it as a whole it will feel more difficult because of the deep depth of the vase but when compared to turning it little by little it will feel easier when we turn it
I am having difficulty finding a superlative adjective to adequately describethis beautiful work of art!!! I am curious to know if the pieces in the middle section of the jar are end of grain cuts or are they from a burl? Regardless, you sir, are definitely a master craftsman!!!
PARABENS SR MAYUKO, FICOU MUITO HARMONICO, PODERIA ME INFORMAR , SE O SR USOU ( UM PROGRAMA DE COMPUTADOR PARA FAZER AS MEDIDAS ) E SE POSSIVEL ME INFORME O ANGULO USADO PARA AS 16 PARTES. __ SE USOU UM PROGRAMA , SE POSSIVEL , ME ENVIE O ENDEREÇO OU SITE . OBRIGADO. MAIS UMA VEZ PARABENS.,, LINDA PESA.
Eu não uso um programa de computador, para medir o ângulo de 16 peças é 360/16 então o ângulo é 22,5 graus, e se você quiser usar 8 peças então 360/8 45 graus e assim por diante
Mensch, stell dein Sägeblatt beim Auftrennen von Holz tiefer. Es reicht, wenn die Sägezähne gerade herazsschsuen. Ist wesentlich sicherer und fachgerecht!
Another sublime piece. The amboyna burl was so gnarly at the beginning and yet its inner beauty shines through. When a skilled artist knows their materials, anything is possible.
Thank you for your appreciation of my work, it's true that amboyna has very unique fibers after finishing 🙏🙏🙏
I like your marvelous work that you are doing let your videos comes into my phone in dozens coz l like timber work
Pokoknya gw akuin kalo anda ini master segment Woodturning Indonesia. Eh sorry dunia deh 👍👍👍👍 pokoknya berkarya terus bos tunjukkan kalo seniman kayu Indonesia bukan kaleng-kaleng 👌
WHAT A GREAT JOB YOU DID ON THAT JAR BUDDY.ITS AWESOME. FROM DOUG
Thank you very much 🙏🙏
Wow, just wow. the hours you have put in are amazing. This is a awesome project. thanks for sharing.
It’s already clear your craftsmanship with wood is excellent, but it takes good videos to really show it here. Your videos are very well-thought-out, and they’re soothing to watch and listen to. Well done, mate. Thank you.
Thank you very much for all the attention given to my work, happy to be able to share and hopefully it can be useful 🙏🙏🙏
Beautiful piece of art!❤️👏🏻👏🏻👏🏻👍
Thank you very much Wanda 🙏🙏
Another fantastic turning.
Thanks Harry 🙏🙏
An artwork of absolute harmony and beauty! Only by watching the work in progress one can appreciate the ingenuity of design, the lot of preparation and finally the emerging of beauty in the turning itself and the final polish. You are a true artist and I bow in respect!
Excellent Piece, thanks for sharing. Full View and Like 👍
Thanks Allen 🙏
Fantastic Jar, love it. Stay safe, John 🙏🙏🙏
Thanks Siam 🙏🙏
That is a fantastic looking turning Mayuko. I just love the woods that you are able to obtain for your turnings.
Thanks Jack, I'm grateful to be able to get good wood to turn 🙏🙏
What a design. Congratulations.
A true work of art. Thanks for sharing!
So gorgeous & an efficient use of materials. Far better than hallowing out a solid block of wood...so painful to watch lol.
Thank you, yes the segmented method is a method with efficient use of materials, it doesn't really require a large log 🙏🙏
This has become a beautiful vase, Mayuko, breathtaking!
What fascinates me most is the choice of wood types and the their combination. To me, that's proof of a skilled artist.
Thank you for your assessment of my work, Amboyna does have a very unique wood grain 🙏🙏🙏
That’s absolutely beautiful 😍
Thank you 🙏🙏
Beautiful , absolutely beautiful ! .
Thank you 🙏🙏🙏
My friend, you really do amazing and unreal things. Refined taste and fantastic appearance. FANTASY!!!👏👏👏👌
Thank you for your rating of my work 🙏🙏🙏
Love it, love it, love it. True craftmanship, love the timbers you were using. Keep the videos coming.
Thank you very much Shaun 🙏🙏
...wow, what a beautiful masterpiece...the burl with the walnut is gorgeous!...👍
Thank you, yes it fits perfectly in the combination of the two woods
WELDONE mayuko beautiful. very good.
Totally amazing!
Thank you 🙏🙏🙏
Really nice, another beautiful piece of work 👏
Thank you 🙏🙏
You always make a new creativity .
Thank you 🙏
Excellent!!
Thank you 🙏🙏
Very nice project. looks fantastic! Of course safety is each persons individual responsibility, but suggest you lower your saw blade down. you don't need that much sticking up above the top of your wood. Raise it just enough to clear the gullets of the blade :)
Thank you very much, but my table saw is broken, the saw blade can't be lowered, but I thank you for the advice 🙏🙏
Beautiful!
Thank you 🙏🙏
A lot of work beautifully done
Thank you 🙏
very good job mate
Thanks Mark , 🙏🙏
That is very good. It must take some patience to make those rings
Thank you, Yes it's true it took a few days to complete this work
Beautiful. Some of your best work.
It's fantastic!! Thank you
You're welcome and thanks too 🙏🙏🙏
Beautiful, as usually. Great piece!
Thanks 🙏🙏
You do fantastic job. I wish I had the patience to start a project like this.
Thank you, yes you definitely can and do it
Very beautiful
Thank you 🙏🙏
Incredible turning and excellent engineering!! Great skill using all disciplines of Geometry and Math!! I neededath skills at my job but we needed
US math. No where near as accurate as the metric system.
Thank you very much, yes all of them use the right size to produce a precise shape
BEAUTIFUL!!!
Thank you 🙏
A masterpiece!
Absolutely beautiful ❤️
Thank you 🙏🙏
Nice.👏👏👏
Thanks 🙏
Beautiful
Thanks 🙏
Amazing work looks beautiful
Thank you 🙏🙏
Very nice work. With a vessel as large as this, you should consider making or buying a steady rest.
Thank you, yes you are right I have to think about having a stronger steady rest 👍
Perfection
Siempre haces cosas muy hermosas! 👍 Y este es de los más lindos! 👏👏👏
Masha Alloh
Amazing
🙏🙏
true it .. true it every time
Love it!
Thank you 🙏
Thanks for retuning your answer. Just getting started in segmented bowls so it’s always interesting what you come up with. Do you primary use carbides.
Yes I always use carbide
Precioso trabajo y preciosa madera
Gracias por compartir.
Un abrazo
Cuídese
Muchísimas gracias Jose 🙏🙏
Tremendo. Gracias!!
muchas gracias tambien Nik 🙏🙏
Simply: Wow!
🙏
Nuostabus meno kūrinys
👍👍👍👍👍☕☕
Kiek laiko reikia tokį kūrinį pagaminti?
Sėkmės kuriant naujus meno kūrinius.
Labai ačiū, paprastai vieną darbą užbaigiu per 4-5 dienas 🙏🙏🙏
@@mayukowoodturning7644 labai gražus kūriniai 👍👍👍👍👍👍👍👍👍
Me encanta ver trabajar la madera
Gracias y el trabajo de la madera es muy agradable para mí.
Super faut de la patience combien de temps pour la fabrication et encore bravo jolie boulot
Merci, il a fallu 3 jours pour terminer 1 travail
c est un chef d oeuvre
Merci Monsieur 🙏
Como siempre, muy buen trabajo y buena selección de maderas. Saludos maestro.
muchas gracias antonio 🙏🙏
I'm just getting into turning, and just found your channel. You've got some beautiful pieces. I have one question for you, why do you turn part of the jar first, then glue on more pieces and then turn some more. As opposed to gluing the whole jar up at once and then turning. Keep up the videos.
Thank you for watching my video, the reason is that if you turn it as a whole it will feel more difficult because of the deep depth of the vase but when compared to turning it little by little it will feel easier when we turn it
I am having difficulty finding a superlative adjective to adequately describethis beautiful work of art!!! I am curious to know if the pieces in the middle section of the jar are end of grain cuts or are they from a burl? Regardless, you sir, are definitely a master craftsman!!!
Thank you for your appreciation of my work..🙏🙏🙏 , the center of this jar is amboyna burl wood
PARABENS SR MAYUKO, FICOU MUITO HARMONICO, PODERIA ME INFORMAR , SE O SR USOU ( UM PROGRAMA DE COMPUTADOR PARA FAZER AS MEDIDAS ) E SE POSSIVEL ME INFORME O ANGULO USADO PARA AS 16 PARTES.
__ SE USOU UM PROGRAMA , SE POSSIVEL , ME ENVIE O ENDEREÇO OU SITE . OBRIGADO.
MAIS UMA VEZ PARABENS.,, LINDA PESA.
Eu não uso um programa de computador, para medir o ângulo de 16 peças é 360/16 então o ângulo é 22,5 graus, e se você quiser usar 8 peças então 360/8 45 graus e assim por diante
Hello the artist. My God there will be a lot of ginger😀 Did you change the scenery in front of your turn? Regards from France
which view? 😁
@@mayukowoodturning7644 🤣
Прекрасная работа!
Спасибо 🙏
Wonderful turning. I'm a hobby turner and I hope to get to half your level of skill some day. Very inspirational. More videos please.
Thank you alan for appreciating my work and I hope you can too 🙏
Harika tasarım. Ellerine sağlık.
Teşekkürler 🙏
How long did you leave the levels on for the glue to work?
more than 4 hours letting the glue to dry and then get to work
@@mayukowoodturning7644 Thank you so much! Your work is beautiful!
Very nice! How long did this take you? Start to finish?
Thank you, took 3 days to finish this job
Mensch, stell dein Sägeblatt beim Auftrennen von Holz tiefer.
Es reicht, wenn die Sägezähne gerade herazsschsuen.
Ist wesentlich sicherer und fachgerecht!
Meine Tischkreissäge ist kaputt, das Sägeblatt lässt sich nicht mehr absenken, danke für den Rat 🙏
Trabalho de primeiríssima qualidade.
Muito obrigado 🙏🙏
Did you make that push stick your self ?
which push stick?
The one in this video
That is so beautiful. Where do you sell your pieces? Have you tried making a genie bottle?
Thank you very much 🙏
For purchase :
www.etsy.com/shop/Mayukoindonesia
Yes genie botle a great idea, I hope I can make one too
He did. 5 months ago.
What is the black wood you used for the border and top center?
It is rosewood
WOW !
Meu amigo e Professor que trabalho Maravilhoso parabéns. Qual o nome dessa madeira clara linda de mais
Obrigado Ranulfo, o nome é amboyna burl wood
Комментарий в поддержку канала и ролика, а также труда мастера.
Спасибо 🙏🙏
SWEET
@@MichaelHerrick-qn6ld 🙏👌
"It's wonderful, It's marvelous !" th-cam.com/video/noGMKs-JQtk/w-d-xo.html Yes, Yes, it is a marvelous thing that you do ! 😁
Are you waiting for the glue to dry before starting to turn it. It also looks like your using white glue, why/
yes I use white glue, as long as the tail stock can stick to the wood, I don't wait for the glue to dry and it can be done
No writhing knife, saw blade too high, makes it difficult for me to watch. But the segment work and turning is awesome.
👍👍👍
👍 👍 👍
🙏🙏
your table saw blade is WAY too high
Yes that's right, my table saw is broken, the saw blade can't be lowered
😅