No problem and your welcome. Little things like that drive me nuts because I don't want it looking sloppy and also don't want to have any problems with the wiring so this was my simple solution for it.
Best catch can install vid for the 392 that I’ve seen on TH-cam. I appreciate the extra detail with the wire harness using the zip tie to lock them down to the bracket!.. Perfect timing for my upcoming install on mine when it arrives this week.
Larry Ballard Thank you very much I really appreciate the complements! I just really didn’t like the wiring flopping around. You will be really glad you got one once you see the oil it catch’s. I am going to have a review video on mine this Sunday if you are interested. Hopefully this video will be helpful for you on your install! Thanks for watching and commenting!
Thanks and glad to hear that you enjoyed the video! The zip tie is a must personally and glad you liked that idea as well! Thanks for watching and commenting!
I ordered a JLT catch can, I'm hoping it works as well. I thought everyone that's even slightly mechanically inclined has and(😂) zip tie or two around.
I didn't think of removing it to make it look cleaner I am going to have to take a look now thanks! Thanks I love the way it looks with the black fittings!
I have watched dozens of catch can installs (because that is what I do). Some have made it look as painful as pulling nose hairs. You did a great job with everything! I especially like the tie wrap trick. I was either going to drill a hole in the z bracket or put a tab under the mounting hole that had a hole to push the christmas tree into. Pretty slick mister....
Thank you very much and I appreciate the kind words! Haha you made me laugh about being as painful as pulling nose hairs! I wanted a way to secure the wires and that's what I found and thought it might be a helpful idea. Drilling a hole for the Christmas tree clip would also be good. Thanks for your support and watching and commenting!
Thanks to the Great One's...........who provided excellent video insight and "how to" for installing the BTOCC on a Shaker hood SP. You are special heroes to me as I just installed mine.
That is so awesome brother! I am glad that you found this video helpful and was able to get your oil catch can installed! CHEERS! Thanks for watching and commenting buddy!
Thanks for a great install video. I just installed my catch can on my 17 Scat Pack. I used a fastener puller to remove the harness out of the block. I was careful to get the can as snug as I could without over-tightening. I can see that would strip if you over tighten. Thanks. I purchased my car used with 12k on it. Better late than never. I see you used a washer on the CC. I did not see one in my kit.
You're welcome and glad you enjoyed the video! That would be the proper tool to use unlike me lol. Yes it would strip out easily and you just want to be careful. That's is very true and it is better late than never they are a good investment. That's strange that you did not get a washer in your kit but not having wont hurt anything. Thanks for watching and commenting buddy!
@@MeanBee392 Seems I have a newer kit. The hoses where the perfect length and no cutting required. I used a standard zip tie but the job came out great. I did call and UPR Products and they said the new version had a bolt with a washer already attached a lot of guys where dropping parts into the engine bay so they only have one long spacer and one bolt/washer. Fewer parts to drop. Thanks again.
That's awesome that the video was helpful for you and I love knowing that my video helps people out! Glad to hear that your install went smoothly! You are very welcome and thanks you for watching and commenting!
Thanks for the clear video explanation. The instruction sheet that comes with the catch can from Billet has horrible photos. They should just reference your video for the installation instructions. 😆
You're welcome! Glad you found the video helpful and informative. Haha yes the photos are bad but gave me the idea to make this video to help people out. Hahaha that would be cool if they would do that because I think it would help everyone. Thanks for your support I appreciate it!
Thanks! That's great to hear and I am glad the video is helpful to you! Awesome buddy if you dont mind let me know how the install went. Thanks for watching and commenting!
Thank you I appreciate it! I have a video on my channel also showing how much it has caught in between oil changes. The video is on my channel. Thanks for watching and commenting I appreciate your support!
Gonna order today! I'm not sure what color yet! Can't make up my mind! My car is destroyer grey, with red brakes, red r/t badge, and boosted scatpack emblems with the red eyes... so I'm thinking some kinda red!!
@@richlopez5699 Awesome man! I think staying with red would look awesome with that destroyer grey and would really start tying in the rest or the red! Personally it would be a great accent color for the destroyer gray! I am curious what you end up getting so if you don't mind let me know.
@@richlopez5699 That's a great company and their products are awesome! I love that they color match and are officially licensed products. You are going to be very happy with that purchase! Thanks for taking the time to let me know.
You are welcome! It is an easy job and I would recommend doing it your self it just give a great sense of accomplishment when ever working on your own car. Thanks for watching and commenting!
Curious as to why you need a catch can. Where you connected on the rear of the motor. Is a factory catch can that has a dip stick in it to check it for full. Are the factory ones not any good?! Thanks.
Thanks for watching and commenting! The factory one from what I can tell really doesn't catch much at all the one I have installed shows how much still blows by and it collects a lot of oil! I was just thinking I should do a video on how much it catches and now seeing your comment I will have to do that video soon. The 6.4L or 392 produced so much blow by it is kinda mind blowing. Would you like to see a video on how much it collects?
Nice video man. They should pay you to include your TH-cam link for the install instructions haha. That Christmas tree is a b**** to get off, but I installed with a warm engine and at 21,000 miles so it could have played a part.
That would be epic if they did that! Thanks for the kind words and I am glad you enjoyed the video. Haha yes it can be a pain and I cant even imagine trying to do it on a hot engine! Thanks for watching and commenting!
Hey MeanBee, I think I'll order both a catch can and a dress up kit this weekend! What exactly did you order for your catch can, was is the regular cost of the can, plus extra for Z bracket and extra for black fittings? Also, did you question them if you could get "392", or anything on the top? I see their site shows some like that...
Krista Doucet Yeah I ordered the catch can and then add the Z bracket, black fittings, color matched hose ends, and the braided hose unfortunately that all cost extra but personally it’s worth it! Sometimes they have an option for engraving or you can do a custom engraving and you will have to email them for a custom one and if they don’t have a standard one listed as an option you will have to email them for that also. Hopefully this helps and if you have any more questions let me know!
Thanks for that! We decided for now just to go with the dress up kit, as adding the oil catch can at the same time would add up! Right now what bugs me most under the hood is the ugly coolant tank! Do you have any plans for yours?
Krista Doucet Awesome! Yes it does add up hahaha I know all about that! Yes I would agree the coolant tank looks bad! I would like to get a billet cover for it someday!
I really love the hose end's. I upgraded to the braided hoses but they will also work on the rubber hose as well. Thanks for watching and commenting buddy!
Here are the same ones that I used this is the Amazon link and it is 100 of them for $7.90 and it is prime eligible. Hopefully this helps! Thanks again for your support! www.amazon.com/PERFECT-VISION-MOUNTING-SATELLITE-CT7BLK-MH/dp/B00XUYJZBI/ref=sr_1_3?ie=UTF8&qid=1546570344&sr=8-3&keywords=zip+ties+with+mounting+hole
Thank you and glad to hear that you enjoyed it and found it informative! Yes blue lock tight it a great option and I would recommend it! Thanks for your support! 🐝
Hey man just checking, I’m very close to buy a challenger. I was looking on the BT site after watching this, and looks like a great product and company. Their install shows them fitting one end of the line to a connection under the passenger side coil cover, where as you have it going to the front. Any way better than other? Cheers
Hopefully you will be getting your Challenger soon! They have really nice products but I would also check out American Brother Designs as well. I have oil catch cans from both company's are they are very quality products. I have a video of the American Brother Designs oil catch can also if you would like to check it out. But to answer your question you can route them either way. Hopefully all that info is helpful and thanks for watching and commenting!
Bought my 392 with a catch can already installed. Was wondering the name or part number of the hose with the 90 degree angle so that i can take it off and bring it to the dealer without them voiding my warranty.? Or where i can find one? Pls help
I don't know the part numbers for them but I would recommend Steve White Motors online they are very helpful and informative. Hopefully this helps and sorry that all the info I have. Thanks for watching and commenting!
O it doesn't it is a free flowing catch can with no check valve. That's kinda strange and I would like to see how yours is hooked up. Thanks for watching and commenting!
Nice video. Just wish someone would show how easy or how difficult it is to empty the catch can. From all the video’s I’ve seen on this, it looks tight to remove to empty. Last thing i want is spilling oil on my engine.
Thanks and glad you enjoyed it! It is a bit of a tight fit but nothing to bad and I have never had a problem with dropping it or almost dropping it when removing it. Hopefully that helps and thanks for watching and commenting! 🐝
@@MeanBee392 thank you. I will keep looking for them. I love your video. The best out there on how to install it. Great way to position the camera at all times.
awesome, That looks great, was the hose and brass barbs half inch ? I bought the wrong catch can, the one I bought didn't even have the brass barbs, gosh I need those. I need that spacer too, I should have bought the kit you have, wish I had seen your video first. Great job best regards.
Thanks! I am not for sure on the size but if you need me to check I can for you. That's a bummer that you did not get the barbs or the spacer with your catch can. This kit that I got I was very pleased with. Sorry you fount my video a bit late but please consider subscribing to the channel so you don't miss another video. Thanks I appreciate it and take care buddy!
Question meanbee392, i have a 5.7 2015 charger R/T, just wonder if the same aplication and same steps and the same type of catch can...o by the way i have 23,000 miles any good to installed now.. Thanks.
Orlando Flores Yeah it will be the same for you but the lines just are in a bit different spot but not hard to find them. I would recommend it and personally it’s never to late to put one on so you can save future oil blow by from going back into your intake.
I got it from Billet Technology. I have been very pleased with it. American Brothers Design makes a really nice one as well and we have one on our Charger. I do have a video on that one as well if you would like to check it out. Thanks for watching and commenting!
Yes this is just the anodized blue that they offer but if you want an exact color match check out American Brother Designs they paint them to the same exact color code of your car. I have a video on my channel of their door locks and bezels on our Gomango Charger and I show how they are an exact color match. Hopefully this helps and thanks for watching and commenting!
Yes it is stronger than paint but for parts like this as long as you are not hitting it with metal objects its not going to chip so either one will be good.
I got it at my local hardware store but here is a link for some on Amazon that I found for you www.amazon.com/Install-Bay-BMCT11-50-Pound-100-Pack/dp/B0058TV0XO/ref=sr_1_3?crid=1KIDQ2Y41RHJ0&dchild=1&keywords=zip+tie+with+eyelet&qid=1591326736&sprefix=zip+tie+with+eye%2Caps%2C227&sr=8-3 Hopefully that helps and thanks for watching and commenting! 🐝
Same here I am really into WWII aviation but I do love it all! They are a lot of fun and it you have spare time I would recommend getting into RC planes! If you ever have any questions feel free to hit me up!
Cool, I'm really into WWll aviation also, I went to Oshkosh this year and hope to go next year, its an aviation fans Disney World, lots of WWll stuff, if you ever go let me know, I camp there in my travel trailer.
Nice we have more than just Mopars in common lol! Wow man that's is awesome my Dad and I have always wanted to go ever sense I was a kid. Maybe someday we will be able too and meet up with you!
I didn't think much about catch cans until I installed one on my 2017 Silverado. I was amazed at the junk it caught. The EPA would rather that you burn this crap in your engine. Direct injection and turbo engines are for the birds. There is some maintenance with a catch can however. The manufacturer of my can recommends that the screen on it be cleaned with brake cleaner every 10,000 miles.
@A Stanton1966 It is mind blowing at what all they collect and to think they want your engine to eat all of it to "burn it off" is just insane and not healthy for the engine! I say you wouldn't 💩 where you eat so why should your engine. Thanks for watching and commenting! 🐝
Thanks for the video, I just installed my oil catch can following all your steps. Where did you buy your ziptie? Do you have a link or does it have a specific size?
That is awesome to hear! Hopefully the video was helpful and your install went smooth! I bought a pack of the zip ties at a local hardware store and I do not know the size off the top of my head. They are a mounting zip tie. Let me see what I can find out for you. Thanks for watching and commenting!
MeanBee392 Happy thanksgiving! Thanks! It went smoothly, somethings were harder to remove as you noted. It was the most detailed video I could find, perfect for someone totally inexperienced.
Thanks and I hope you had a great Thanksgiving! That is so great to hear that the video was so helpful for you! Thanks for watching and commenting and all the kind words!
You're literally the only video that clearly showed what harness to take off. THANK YOU
You're welcome and glad the video was helpful for you! Thanks for watching and commenting!
Lol right, the rest said "just take this harness off" then doesn't even show them taking it out
Im gonna do it tomorrow, thanks for video...
I think it’s the best installation video of the oil catch can in TH-cam. Thanks 👍🏼👍🏼
Thank you very much I really appreciate the kind words! You are welcome!
I appreciate you showing what to do with that harness. I been watching dozens of vids trying to figure out if it was supposed to go somewhere else.
No problem and your welcome. Little things like that drive me nuts because I don't want it looking sloppy and also don't want to have any problems with the wiring so this was my simple solution for it.
Nice to see somebody using the correct tool to cut a hose, some other guy on TH-cam was using a pruning shears for gardening but I guess it worked.
Haha yeah I guess that would work... but I do prefer using the proper tools for the job. Thanks for watching and commenting! 🐝
It's the little things that matter to me. The Zip tie idea with the screw eye is the way to go. Thanks man.
That is awesome to hear and I am glad you enjoyed the video! Thanks for the support I greatly appreciate it! 🐝
Best installation video I have seen. Nice!
Joeysixtysix Thanks man that means a lot to me!
Best catch can install vid for the 392 that I’ve seen on TH-cam. I appreciate the extra detail with the wire harness using the zip tie to lock them down to the bracket!.. Perfect timing for my upcoming install on mine when it arrives this week.
Larry Ballard Thank you very much I really appreciate the complements! I just really didn’t like the wiring flopping around. You will be really glad you got one once you see the oil it catch’s. I am going to have a review video on mine this Sunday if you are interested. Hopefully this video will be helpful for you on your install! Thanks for watching and commenting!
Most clear video of this install that I've seen. GENIUS move with the zip tie finish!
Thanks and glad to hear that you enjoyed the video! The zip tie is a must personally and glad you liked that idea as well! Thanks for watching and commenting!
Great installation video! I agree, they should provide and zip tie with the kit.
johnnypro Thanks man. Yeah just something but I can't complain to much because the quality of it is great!
MeanBee392 I totally agree. I love mine.
I ordered a JLT catch can, I'm hoping it works as well. I thought everyone that's even slightly mechanically inclined has and(😂) zip tie or two around.
Interesting that you left that line extension on that evap canister, I removed mine made for a cleaner look. Love those black fittings.
I didn't think of removing it to make it look cleaner I am going to have to take a look now thanks! Thanks I love the way it looks with the black fittings!
I have watched dozens of catch can installs (because that is what I do). Some have made it look as painful as pulling nose hairs. You did a great job with everything! I especially like the tie wrap trick. I was either going to drill a hole in the z bracket or put a tab under the mounting hole that had a hole to push the christmas tree into. Pretty slick mister....
Thank you very much and I appreciate the kind words! Haha you made me laugh about being as painful as pulling nose hairs! I wanted a way to secure the wires and that's what I found and thought it might be a helpful idea. Drilling a hole for the Christmas tree clip would also be good. Thanks for your support and watching and commenting!
Thanks to the Great One's...........who provided excellent video insight and "how to" for installing the BTOCC on a Shaker hood SP.
You are special heroes to me as I just installed mine.
That is so awesome brother! I am glad that you found this video helpful and was able to get your oil catch can installed! CHEERS! Thanks for watching and commenting buddy!
Thanks for a great install video. I just installed my catch can on my 17 Scat Pack. I used a fastener puller to remove the harness out of the block. I was careful to get the can as snug as I could without over-tightening. I can see that would strip if you over tighten. Thanks. I purchased my car used with 12k on it. Better late than never. I see you used a washer on the CC. I did not see one in my kit.
You're welcome and glad you enjoyed the video! That would be the proper tool to use unlike me lol. Yes it would strip out easily and you just want to be careful. That's is very true and it is better late than never they are a good investment. That's strange that you did not get a washer in your kit but not having wont hurt anything. Thanks for watching and commenting buddy!
@@MeanBee392 Seems I have a newer kit. The hoses where the perfect length and no cutting required. I used a standard zip tie but the job came out great. I did call and UPR Products and they said the new version had a bolt with a washer already attached a lot of guys where dropping parts into the engine bay so they only have one long spacer and one bolt/washer. Fewer parts to drop. Thanks again.
Wow..much easier than i thought it would be. Good video
Thank you! Yes this was a super easy install and I think it turned out great!
sure did and the blue is really close to the car's blue
Yeah it is! I was worried that it would be way off but it is not and that made me happy!
Excellent video. Made my life simple. Instructions from Billet aren't good. Put mine in today, looks awesome!! Thanks for excellent walk thru.
That's awesome that the video was helpful for you and I love knowing that my video helps people out! Glad to hear that your install went smoothly! You are very welcome and thanks you for watching and commenting!
Thanks for the ziptie tip... I had to shave the inner diameter of the eyelet down considerably to fit the oem clip
Your welcome! Thanks for watching and commenting!
Great idea with the zip tie. Great install video!
Thank you! I just didn't like the wiring harness flopping around so I had to find a fix!
Thanks for the clear video explanation. The instruction sheet that comes with the catch can from Billet has horrible photos. They should just reference your video for the installation instructions. 😆
You're welcome! Glad you found the video helpful and informative. Haha yes the photos are bad but gave me the idea to make this video to help people out. Hahaha that would be cool if they would do that because I think it would help everyone. Thanks for your support I appreciate it!
Best install video for sure! Thank you and subbed!
Thank you very much and HUGE thanks for subscribing!
fantastic video! Thanks it answered all my questions! Installing mine tonight.
Thanks! That's great to hear and I am glad the video is helpful to you! Awesome buddy if you dont mind let me know how the install went. Thanks for watching and commenting!
Great stuff, man! Always good to see these vids. Always someone looking for help so defiantly great additions.
Thanks man its a bit long but I feel is informative.
Great tutorial, I just installed my BT one also!!! Man it feels good to have it
Thanks! Yes it is a great feeling having one and knowing the the engine oil is no longer going into the intake side of your engine!
Nice presentation. Hope to see what the catchcan captures after some miles.
Thank you I appreciate it! I have a video on my channel also showing how much it has caught in between oil changes. The video is on my channel. Thanks for watching and commenting I appreciate your support!
Thanks for the video! Great looking car!Cant wait to install mine!
You're welcome! Hopefully this video will be helpful to you! Thank you! What color did you get? Thanks for watching and commenting!
Gonna order today! I'm not sure what color yet! Can't make up my mind! My car is destroyer grey, with red brakes, red r/t badge, and boosted scatpack emblems with the red eyes... so I'm thinking some kinda red!!
@@richlopez5699 Awesome man! I think staying with red would look awesome with that destroyer grey and would really start tying in the rest or the red! Personally it would be a great accent color for the destroyer gray! I am curious what you end up getting so if you don't mind let me know.
I went with the American brother designs in Torred. Cant wait to get it
@@richlopez5699 That's a great company and their products are awesome! I love that they color match and are officially licensed products. You are going to be very happy with that purchase! Thanks for taking the time to let me know.
Yessah, that looks great. I'll be doing mine very shortly.
Thanks brother! Nice it is an easy install but good luck anyways and looking forward to a video on it!
Thanks for the info. I might do this job myself on my SRT8 392.
You are welcome! It is an easy job and I would recommend doing it your self it just give a great sense of accomplishment when ever working on your own car. Thanks for watching and commenting!
@@MeanBee392
Indeed. I the kit just came in my wife told me. I need to work on it soon.
Zip ties are Gods gift to man
Hahaha yes sir! Thanks for watching and commenting!
Awesome video brother! 💪🏼
Thanks brother!
Curious as to why you need a catch can. Where you connected on the rear of the motor. Is a factory catch can that has a dip stick in it to check it for full. Are the factory ones not any good?! Thanks.
Thanks for watching and commenting! The factory one from what I can tell really doesn't catch much at all the one I have installed shows how much still blows by and it collects a lot of oil! I was just thinking I should do a video on how much it catches and now seeing your comment I will have to do that video soon. The 6.4L or 392 produced so much blow by it is kinda mind blowing. Would you like to see a video on how much it collects?
@@MeanBee392 yes definitely. I just bought a 2018 new scat pack. Seems like this is a must for it to save the intake crud build-up!
Sounds great I will do one this Sunday! Yes it is a must personally and it will save you from a lot of build up!
@@MeanBee392 I have ordered one off eBay thx
@@nervouswreck392 Very nice! Once you see how much it collects you will be really glad you got one! What brand did you get? You're welcome!
Nice video man. They should pay you to include your TH-cam link for the install instructions haha. That Christmas tree is a b**** to get off, but I installed with a warm engine and at 21,000 miles so it could have played a part.
That would be epic if they did that! Thanks for the kind words and I am glad you enjoyed the video. Haha yes it can be a pain and I cant even imagine trying to do it on a hot engine! Thanks for watching and commenting!
Hey MeanBee, I think I'll order both a catch can and a dress up kit this weekend! What exactly did you order for your catch can, was is the regular cost of the can, plus extra for Z bracket and extra for black fittings? Also, did you question them if you could get "392", or anything on the top? I see their site shows some like that...
Krista Doucet Yeah I ordered the catch can and then add the Z bracket, black fittings, color matched hose ends, and the braided hose unfortunately that all cost extra but personally it’s worth it! Sometimes they have an option for engraving or you can do a custom engraving and you will have to email them for a custom one and if they don’t have a standard one listed as an option you will have to email them for that also. Hopefully this helps and if you have any more questions let me know!
Thanks for that! We decided for now just to go with the dress up kit, as adding the oil catch can at the same time would add up! Right now what bugs me most under the hood is the ugly coolant tank! Do you have any plans for yours?
Krista Doucet Awesome! Yes it does add up hahaha I know all about that! Yes I would agree the coolant tank looks bad! I would like to get a billet cover for it someday!
I'm interested in the hose end caps. My Destroyer Grey BT can didn't come with any..Are your hoses the free rubber hoses or the braided hoses?
I really love the hose end's. I upgraded to the braided hoses but they will also work on the rubber hose as well. Thanks for watching and commenting buddy!
Dam you make it seem so easy. I wish you can do a video on a 5.7 if you have one at your disposal
eunit08 Thanks bro! I would like to do something like that! I will have to be on the look out for one and maybe I could make a video on it!
Fantastic tutorial . Thank you.👍🏻
You're welcome and glad you enjoyed it and hopefully it will come in help full for you. Thanks for watching and commenting!
Can you share Info on the ziptie eyelet. Size..where to buy.
Yes I can! Let me find the info on it and I will get back to you. Thanks for watching and commenting!
Greatly appreciated. Thank you
Here are the same ones that I used this is the Amazon link and it is 100 of them for $7.90 and it is prime eligible. Hopefully this helps! Thanks again for your support!
www.amazon.com/PERFECT-VISION-MOUNTING-SATELLITE-CT7BLK-MH/dp/B00XUYJZBI/ref=sr_1_3?ie=UTF8&qid=1546570344&sr=8-3&keywords=zip+ties+with+mounting+hole
Excellent video, very informative!
Question;
Do you recommend blue lock tite?
Thank you
Thank you and glad to hear that you enjoyed it and found it informative! Yes blue lock tight it a great option and I would recommend it! Thanks for your support! 🐝
Hey man just checking, I’m very close to buy a challenger. I was looking on the BT site after watching this, and looks like a great product and company. Their install shows them fitting one end of the line to a connection under the passenger side coil cover, where as you have it going to the front. Any way better than other? Cheers
Hopefully you will be getting your Challenger soon! They have really nice products but I would also check out American Brother Designs as well. I have oil catch cans from both company's are they are very quality products. I have a video of the American Brother Designs oil catch can also if you would like to check it out. But to answer your question you can route them either way. Hopefully all that info is helpful and thanks for watching and commenting!
Ok thanks men i will as soon i can. This is something i always plan to do, thanks.
You are welcome! Glad I could help you out! Thanks for watching and commenting I really appreciate it!
Bought my 392 with a catch can already installed. Was wondering the name or part number of the hose with the 90 degree angle so that i can take it off and bring it to the dealer without them voiding my warranty.? Or where i can find one? Pls help
I don't know the part numbers for them but I would recommend Steve White Motors online they are very helpful and informative. Hopefully this helps and sorry that all the info I have. Thanks for watching and commenting!
MeanBee392 yea np , thankyou for replying, found it at the dealer.
Your welcome! That's awesome that you found it at the dealer!
Is there an in and out outlets on the catchcan? Good vid
Yes there is. Thanks I appreciate it and thanks for watching and commenting! 🐝
MeanBee392 there is also another return hose on the other side going to the airfilter does thatneed a catchcan too ?
Does it matter which end goes in, vs out of the catch can? The one in my Challenger seems to be hooked up the other way around.
O it doesn't it is a free flowing catch can with no check valve. That's kinda strange and I would like to see how yours is hooked up. Thanks for watching and commenting!
Hello. I just purchased a Dodge Charger ScatPack. Is it really worth installing an oil catch can? Thanks
Personally yes 100% just to keep the intake side of my heads clean and from gumming up. If you have anymore questions on your car feel free to ask.
Nice video. Just wish someone would show how easy or how difficult it is to empty the catch can. From all the video’s I’ve seen on this, it looks tight to remove to empty. Last thing i want is spilling oil on my engine.
Thanks and glad you enjoyed it! It is a bit of a tight fit but nothing to bad and I have never had a problem with dropping it or almost dropping it when removing it. Hopefully that helps and thanks for watching and commenting! 🐝
where exactly did you but that oil catch can? I want it to come with the blue hose ins and I just can't find them.
I got it from Billet Technology and they are the ones I got my hose ends from also. Thanks for watching and commenting and hopefully that is helpful!
@@MeanBee392 thank you. I will keep looking for them. I love your video. The best out there on how to install it. Great way to position the camera at all times.
@@ronaldigame Thank you very much! I really appreciate your support and kind words! Have a great day buddy!
awesome, That looks great, was the hose and brass barbs half inch ? I bought the wrong catch can, the one I bought didn't even have the brass barbs, gosh I need those.
I need that spacer too, I should have bought the kit you have, wish I had seen your video first. Great job best regards.
Thanks! I am not for sure on the size but if you need me to check I can for you. That's a bummer that you did not get the barbs or the spacer with your catch can. This kit that I got I was very pleased with. Sorry you fount my video a bit late but please consider subscribing to the channel so you don't miss another video. Thanks I appreciate it and take care buddy!
Question meanbee392, i have a 5.7 2015 charger R/T, just wonder if the same aplication and same steps and the same type of catch can...o by the way i have 23,000 miles any good to installed now..
Thanks.
Orlando Flores Yeah it will be the same for you but the lines just are in a bit different spot but not hard to find them. I would recommend it and personally it’s never to late to put one on so you can save future oil blow by from going back into your intake.
Where did you get the catch can? If i may ask.
I got it from Billet Technology. I have been very pleased with it. American Brothers Design makes a really nice one as well and we have one on our Charger. I do have a video on that one as well if you would like to check it out. Thanks for watching and commenting!
Great video...very informative.
Thank you I really appreciate it!
Is that there “blue” offering..? I also have a b5 blue n cant find the exact color match
Yes this is just the anodized blue that they offer but if you want an exact color match check out American Brother Designs they paint them to the same exact color code of your car. I have a video on my channel of their door locks and bezels on our Gomango Charger and I show how they are an exact color match. Hopefully this helps and thanks for watching and commenting!
Isnt powder coat better then paint..? I
Yes it is stronger than paint but for parts like this as long as you are not hitting it with metal objects its not going to chip so either one will be good.
Where did you get that eyelid ziptie from?
I got it at my local hardware store but here is a link for some on Amazon that I found for you www.amazon.com/Install-Bay-BMCT11-50-Pound-100-Pack/dp/B0058TV0XO/ref=sr_1_3?crid=1KIDQ2Y41RHJ0&dchild=1&keywords=zip+tie+with+eyelet&qid=1591326736&sprefix=zip+tie+with+eye%2Caps%2C227&sr=8-3
Hopefully that helps and thanks for watching and commenting! 🐝
Great video !
Thank you!!!
awesome! now to buy one...
Thanks! Hurry up on get one man lol!
What size socket do I need? Can you link it? I have a 3/8 driver
The socket for the mounting bolt? 🐝
Yes
Mine was a 13MM
Great video thank you for sharing
Thanks and glad your enjoyed it! Hopefully it was helpful. Thanks for watching and commenting! 🐝
Where is the site for the billet catch can?
billettechnology.net/ That is their web site hopefully that helps if not let me know. Thanks for watching and commenting!
Nice install video!! I like how the blocks are orange on the 392! Are those RC airplanes on your wall?
Thanks man! Yeah I thing its cool that they painted them orange also! Lol yes they are I have too meany hobbies!
That's cool, I love aviation and always wanted to get into RC planes.
Same here I am really into WWII aviation but I do love it all! They are a lot of fun and it you have spare time I would recommend getting into RC planes! If you ever have any questions feel free to hit me up!
Cool, I'm really into WWll aviation also, I went to Oshkosh this year and hope to go next year, its an aviation fans Disney World, lots of WWll stuff, if you ever go let me know, I camp there in my travel trailer.
Nice we have more than just Mopars in common lol! Wow man that's is awesome my Dad and I have always wanted to go ever sense I was a kid. Maybe someday we will be able too and meet up with you!
IS IT WORTH IT? THANK YOU
I didn't think much about catch cans until I installed one on my 2017 Silverado. I was amazed at the junk it caught. The EPA would rather that you burn this crap in your engine. Direct injection and turbo engines are for the birds. There is some maintenance with a catch can however. The manufacturer of my can recommends that the screen on it be cleaned with brake cleaner every 10,000 miles.
@Juan V YES absolutely it is worth it 100% and I would highly recommend anyone to get one! 🐝
@A Stanton1966 It is mind blowing at what all they collect and to think they want your engine to eat all of it to "burn it off" is just insane and not healthy for the engine! I say you wouldn't 💩 where you eat so why should your engine. Thanks for watching and commenting! 🐝
Thanks for the video, I just installed my oil catch can following all your steps. Where did you buy your ziptie? Do you have a link or does it have a specific size?
That is awesome to hear! Hopefully the video was helpful and your install went smooth! I bought a pack of the zip ties at a local hardware store and I do not know the size off the top of my head. They are a mounting zip tie. Let me see what I can find out for you. Thanks for watching and commenting!
MeanBee392 Happy thanksgiving! Thanks! It went smoothly, somethings were harder to remove as you noted. It was the most detailed video I could find, perfect for someone totally inexperienced.
Thanks and I hope you had a great Thanksgiving! That is so great to hear that the video was so helpful for you! Thanks for watching and commenting and all the kind words!
Nicely done
Thanks you! Thanks for watching and commenting!
Excellent! Thanks!
You are very welcome buddy!
Thanks
You're welcome and thanks for watching and commenting!
So I guess I'm the only one who's brittle ass Christmas tree broke off in the bolt thread hole huh.
I doubt you are the only one but you can always replace it and easily dig out the broken stem.
instead of buying that special ziptie, just ziptie around the whole harness
That would also work but I was going for a factory look! Thanks for watching and commenting!
What the hell? Using the correct tool to do a job is not normal.
Might want to see a doctor about that.
Really...nice video.
HAHAHA! Your comment made me laugh and thanks for that! Thanks for the complement! Thanks for watching and commenting!