What should we match this up with as a topper? I was thinking that after 48 hours that I would top it with TW seal and shine, but is there something similar that is better? I know TW seal and shine didn't have these gloss numbers. Is the gloss going to drop if I top this with S&S?
Brian, You know all about C5's. Planning to use 3D One on a Uro-fiber 50/50 or Lake Country purple foamed wool pad to remove light swirls. Follow up with Xtreme Solutions LVR403 Foam Pad Polishing Glaze. Can I then top with TAC systems Shinee spray wax or Xtreme Solutions Poly-Seal for the ultimate gloss for car shows? Learning so much from you. Keep up the good work and Merry Christmas from Kansas.
I dont do this alot but I went ahead and purchased a quart of the lvr 403 so I can try it out as you peaked my interest! I really hope I get the same results as you! Thanks for the video!
This video just answered my question I asked you earlier today. thanks bud. This is exactly what I am looking for. Something that will fill, and something a ceramic coating will adhere to
deepsquat600 I stayed at a holiday inn...... its actually made by m and m chemicals (maybe wrong name it starts with a M) of Denver Colorado they are one of top chemical manufacturers that formulate base detailing product then company buy base stock or have custom formulation of there base products puris is there own brand they created. Extreme solutions use this company the large manufacturer and some puris products. I assume they have them do custom formula or have additives to base materials Puris is an offshoot or division of the M and M company it is not part of extreme solutions
@@PeteyMcSavage I believe it's B&B Blending, check thier website, you'll find the whole Jade line (Puris), Detail King carries the Jade line as well. I beieve B&B bought Puris, which was a European company.
Come on Brian. What detailer (professional like you or newbie like me) doesn't want EVERY new product that gives great results. Thanks for the discount!! Love the channel. Off to Amazon 😊
There are so many options! Would love to see a video where you provide your first pick series of products from cleaning to base coat to ceramic to wax and topper. Especially first preference (or ties) for people without garages, as well as confirmation that the products are available. A few things seem to be out of stock on the xtreme site. I have a black lexus I plan to drive for 5 years, but no garage. I 'd love to really take my time one weekend soon and just spend a couple days doing a really thorough clean and then layer a few things. Plan to start with a good polish and decontamination and then ceramic base coat or two. Have the adams car wash, have the citrol and goof off pro. planning on a couple coats of clean and shine and then would like to do one more type of thing on top of that if it's advised, and then do the 'secret sauce' stack to finish, except the LVR367 magnum wax is out of stock, so was hoping to use their topper for that step instead. Just not sure if it will get the same results or if there is a different substitute. Have watched close to a dozen Apex videos, love how clear everything is, have learned a lot!
At 4:22 you switched to a yellow pad on the Honda, was that Rupes Yellow? It looked soft as you rolled over the edges on the hood. Product looks to do an excellent job on restoring the gloss and turning clear as you polish is helpful.
Is this not a Glaze will fillers in it? Personally I'd be a bit wary dropping $330 worth of coating on top of an 'acrylic glaze' until it's long term viability has been proven. Will the glaze affect any of the limited swirl-reduction capabilities if Zipang?
Brian, would you still do a IP wipe with this product or ones meant to be a base or “primer polish” before applying a coating? If so at what point before or after cure? Thanks you are the goat.
I love the performance of the product but have only white cars. Will this product work on lighter color paint as well? If not, what is the equivalent for light color paint ?
Brian...I’m looking to buy a gallon of either power clean or carpro multi-x as per your recommendation for a pre-treat for soiled exteriors. I want something that is effective on the whole exterior including glass & plastic trim. I saw I can buy a gallon of power clean for $35 where as multi-x is around $85. Is multi-x really worth the extra money over power clean?
Hi Guys, team Autobright here. I must thank Aaron of Xtreme Solutions for guiding UK customers to ourselves for this product available from our website autobright.co.uk under our brand name - Final Finish. I have been using this product for many years as a final stage to boost the gloss and it really enhances your final finish. Loving the video Apex Detail
How would a polish know if the paint is dark or light? Honest question considering you're correcting the clear coat. I watched a junkman video where he sorta laughs off polish for dark paint vs light paint
Tldr it cant. Sometimes more fillers are used for darker colors because it's easier to see fine scratches In dark paint. It sounds like a glaze. Fillers are a no no for experienced detailers. He's basically testing the fillers. A true compound, polish and wax would last way longer and probably look better. A glorified infomercial or product demonstration, Unfortunately Apex detail is selling out and becoming a paid influencer. This always happens when they get a large enough following. Dpc was the last one to go this way. I was suspect of his promotion of the xtreme solutions detailer spray. This just confirms it for me. Time for me to move on to newer smaller detailers and mostly sticking with independent reviews and testing from forums etc.
@@taz4100 if someone is trying to sell me a product thats made for darker colors I think I'm calling BS on that one. The filler aspect makes sense but then again all it's doing is hiding rather than fixing which is fine if that's your goal.
Excellent product. Is this similar to Car Pro Essence it how it works or is it completely different??? We have single stage paint so would suit them I imagine.
Great stuff Brian. Only down side is keeping a vehicle down for 48 hrs. To clarify, you are saying wait to put protection on top or it can not be used in the climates or be outside?
I think you would be fine to add protection right after. No other polish or glaze I’ve seen makes you wait to add protection. I just ordered some and just going to layer it right after
Hi Brian. I noticed you used a yellow pad, could you have used a less aggressive pad? Did you base the pad choice on experience or did you do a test spot to determine the pad choice?
You sold me on this one, plus who can resist a coupon code?? 😀 I think this will be great on my wife's Jeep, it's a bit darker and hopefully this will help fill some of the little flaws.
Learned a lot from you! But I have info overload! LOL. Would love some suggestions or video on how to maintain a brand new pearl white car, like a 2020 Subaru Outback with the plastic trim. Something your college graduate daughter could do (hint). Thank you!
Just ordered the Sucker Jr as a Christmas gift to myself. Nice to see how products work before I shell out social security dollars on a hobby car. Thanks for your research, testing and evaluation.
I have just subscribed to your channel. Direct instructions and information and no silly antics or music. I have 2 questions. Do you still like/recommend Meguiar's synthetic sealant? I am getting ready to ceramic coat (Avalon King) a friends car. What polish would you use to remove swirls and scratches? I knooowwww there are tons out there. Thank you
Brian, will 403 work to correct minor imperfections on a coating like Essence+ or will it remove the coating? I have the good fortune of living 15 minutes from Extreme Solutions in south jersey. The guys there are great!
I want to layer a ceramic coating over lvr403 after it cures 48hr. Do I use a IPO on the 403 before applying the coating. I dont want to ruin the beautiful look of the 403 polish
Kris Hi, sorry, just saw this. The LVR2 is great for getting out deeper scratches, and I really like the dynamic cut compound as it gets out lots of scratches and it’s very easy to remove with no dust. Then follow up with their ICE FTW! 😊
Apex Detail my 2020 silver Ford Escape titanium hybrid is in great condition and no scratches that I see. Would u recommend me using LVR 403 with like a soft polishing pad to amp up the gloss before sealant and wax or I also have Sonax perfect finish but since I don’t see any scratches I’m thinking no need for aggressive pad or compound. What do you think?
great video and product review good friend. looks like a homerun.VERY well priced. so it's basically polishing glaze?would u recommend using rotary or da?b well good friend
Hi Brian, thanks for another great video and review. Being over in the uk it can be difficult sometimes to source products you review on this side of the pond. But as I was really blown away by this product I reached out to Aaron at extreme solution to see if they would ship to the uk. Aaron advised the product is sold in the uk under a different name, Final Finish and can be bought through autobright 👍👍😀. Keep up the good work even though it costs me a lot of money....lol Hope you have a great Christmas holiday and New Year and look forward to more videos in 2020!! All the best, Andy 👍 Ps Amazing customer service from Aaron @ extreme solutions
Im a beginner at correcting paint and i was wondering if this would be a good product for a beginner. My black car has minor defects not terrible but definitely there. And which pad would you recommend using with this product on a panel with swirls and minor scratches.
Will this with an aggressive enough pad remove an old ceramic coating? And, if so, would you want to do the a pass to remove the coating, then a second to lay down the acrylic, or would one pass total be sufficient?
Brian, did I understand you correctly- you can apply a ceramic coating over this after fully curing? Just cautious because of how much the coating companies stress the paint being completely bare.
Brian, I should have asked this in my last post..... for us mere mortals that don’t have a shop large enough, what do you recommend doing for the cure time of 24-48 hours. I have a full size pickup and was thinking of purchasing some type of cover to use while it cures but I am not sure if this would affect the time to cure or cause the cover to do a zen thing 😉 (become one with the new finish). Obviously it would need to be protected after it cures. Thanks.
Just received mine. Good size bottle for 11 bux! Just curious what pad is that in this video and can you recommend a pad? Was thinking trying the new euro fiber compound and finishing pad possibly.
HI, what would be a good combo with xteme lvr products, to remove scratches and swirl, then bring to an amazing shine, and what would be the best thing to protect, coating, sealant or topper
Would you use this after a heavy cut compound in a 2 step polish to remove the hazing and bring out the gloss on a black vehicle or would you suggest another product?
What a polishing and sealing glaze? It contains a sealant? Stage 2 to Stage 3 ? I know compounds, polishes but i have no clue what a glaze is? is this a finishing polish?
Brian - I have a 2017 F150 with "white gold" paint, a champagne like color. I have some very light scratches and I would like to make the color pop. Should I use LVR 403 or 404 for this color?
acrylic is a type of paint like enamel. I don't believe it will provide a protection, but adds strength to the paint. Most products that have fillers in them fillers go away by first wash or rain, where as by the explanation of this product it is more of a permanent filler.
Hi Brian, I'd like to consider using this on a grey 08 Honda. I'm looking to try a paint enhancement with the 403 then add TW ICE for my 1st polishing w the Griot's G9, how much product do we need for 1 or 2 cars and which pads would you suggest ? Thanks
Great video Brian ! Dang ,as we say in the South ! I got to get a pint of that stuff ! I have a lake country white polishing pad ,would that work okay ?
What I noticed that it looks like you can cover a larger area than with other products. It seems like a great product. Can one cover a larger area at a time with this product when it comes to polishing with a polisher?
u can go over 100 on gloss readings.....ck out the video on graphene brian did as he hit 101 or 102....there is also another video where he hits 103 but cant think of it offhand. I recently met with Jim lafeber…..founder/owner of dr beasleys products and he too has seen/reached over 100+
@@apexdetail85 would this be an option when u do lexus in spring?? fire agate mica(dark brown copper/gold flaked metallic) will email pics if u still don't have....have a good da
How long do you find an acrylic product like this will last in terms of gloss and filling without a topper? I know it varies depending on how it’s maintained but roughly
Which pads did you use on the Honda ? This is almost like a 1 step but you can add wax after 48 hours .. would white or orange LC CCS pads be ok to use ?
how does the cut and finish of this compare to sonax perfect finish? and if you topped this with say sonax polymer net shield would it increased longevity? I
Use code apex10 for discount!!!!
What should we match this up with as a topper? I was thinking that after 48 hours that I would top it with TW seal and shine, but is there something similar that is better? I know TW seal and shine didn't have these gloss numbers. Is the gloss going to drop if I top this with S&S?
@@davidashley2719 Great question, I would like to know the answer to it too! Brian will tell us..
alberto
@Aaron Valure That's a great idea, I must get one for the wife.
Brian, You know all about C5's. Planning to use 3D One on a Uro-fiber 50/50 or Lake Country purple foamed wool pad to remove light swirls. Follow up with Xtreme Solutions LVR403 Foam Pad Polishing Glaze. Can I then top with TAC systems Shinee spray wax or Xtreme Solutions Poly-Seal for the ultimate gloss for car shows? Learning so much from you. Keep up the good work and Merry Christmas from Kansas.
I dont do this alot but I went ahead and purchased a quart of the lvr 403 so I can try it out as you peaked my interest! I really hope I get the same results as you! Thanks for the video!
Same here lol
Retired at 49 - a have you used it yet? Your thoughts?
"The boss here is happy, her tail is wagging and so is mine" love that line 🤣🤣
This video just answered my question I asked you earlier today. thanks bud. This is exactly what I am looking for. Something that will fill, and something a ceramic coating will adhere to
Extreme Solutions is one of the most underrated brands out there... they make some great stuff.
Ed Draper all it is...is rebranded Puris products
@@PeteyMcSavage how do you know this where do you come by this information? Not saying you're wrong I'm questioning how you know this
deepsquat600 I stayed at a holiday inn...... its actually made by m and m chemicals (maybe wrong name it starts with a M) of Denver Colorado they are one of top chemical manufacturers that formulate base detailing product then company buy base stock or have custom formulation of there base products puris is there own brand they created. Extreme solutions use this company the large manufacturer and some puris products. I assume they have them do custom formula or have additives to base materials
Puris is an offshoot or division of the M and M company it is not part of extreme solutions
Matt Gavin how do you know that?
@@PeteyMcSavage I believe it's B&B Blending, check thier website, you'll find the whole Jade line (Puris), Detail King carries the Jade line as well. I beieve B&B bought Puris, which was a European company.
Come on Brian. What detailer (professional like you or newbie like me) doesn't want EVERY new product that gives great results.
Thanks for the discount!! Love the channel.
Off to Amazon 😊
Thanks for the tip about the interior piano black panels.
Gloss on those cars looked unreal 😍
This looks like a good find B!
There are so many options! Would love to see a video where you provide your first pick series of products from cleaning to base coat to ceramic to wax and topper. Especially first preference (or ties) for people without garages, as well as confirmation that the products are available. A few things seem to be out of stock on the xtreme site. I have a black lexus I plan to drive for 5 years, but no garage. I 'd love to really take my time one weekend soon and just spend a couple days doing a really thorough clean and then layer a few things. Plan to start with a good polish and decontamination and then ceramic base coat or two. Have the adams car wash, have the citrol and goof off pro. planning on a couple coats of clean and shine and then would like to do one more type of thing on top of that if it's advised, and then do the 'secret sauce' stack to finish, except the LVR367 magnum wax is out of stock, so was hoping to use their topper for that step instead. Just not sure if it will get the same results or if there is a different substitute. Have watched close to a dozen Apex videos, love how clear everything is, have learned a lot!
WOW !! Huge turnaround and gloss boost !! I must try this product on my steel gray GTI.
At 4:22 you switched to a yellow pad on the Honda, was that Rupes Yellow? It looked soft as you rolled over the edges on the hood. Product looks to do an excellent job on restoring the gloss and turning clear as you polish is helpful.
To me it appeared to be a Max Shine, Brian has been using Max Shine pads in his more recent videos.
Jay Zstr is yellow softer than the orange pad then? Thx
You’ve taught me a lot Brain ... many thanks
Wow. I'm sold, this will be the jeweling before zipang coat in spring
Is this not a Glaze will fillers in it? Personally I'd be a bit wary dropping $330 worth of coating on top of an 'acrylic glaze' until it's long term viability has been proven. Will the glaze affect any of the limited swirl-reduction capabilities if Zipang?
Your videos are so helpful, especially to a newbie like me.
Great video Bryan. Wish I had more money, to buy more products. That looked great and FUN. I LIKE MAKING VEHICLES SHINY AND SLIPPERY.
Another great video , what would you recommend for white pearl to make it pop like that. Thanks again
Brian, would you still do a IP wipe with this product or ones meant to be a base or “primer polish” before applying a coating? If so at what point before or after cure? Thanks you are the goat.
I spray a 10% IPA into a microfiber to prep...never straight onto the paint .
I love the performance of the product but have only white cars. Will this product work on lighter color paint as well? If not, what is the equivalent for light color paint ?
I will cover that soon.
@@apexdetail85 me the link of yours that covers the Lighter to White paint. Thx
Brian...I’m looking to buy a gallon of either power clean or carpro multi-x as per your recommendation for a pre-treat for soiled exteriors. I want something that is effective on the whole exterior including glass & plastic trim. I saw I can buy a gallon of power clean for $35 where as multi-x is around $85. Is multi-x really worth the extra money over power clean?
Brian how would you compare this to tac systems shiny wax? In terms of gloss.
Got my 403 and my PolySeal , I’m pumped if it doesn’t tomorrow it’s on !
Hi Guys, team Autobright here. I must thank Aaron of Xtreme Solutions for guiding UK customers to ourselves for this product available from our website autobright.co.uk under our brand name - Final Finish.
I have been using this product for many years as a final stage to boost the gloss and it really enhances your final finish.
Loving the video Apex Detail
Oh my.. this one is definitely going on the list 👀
How would a polish know if the paint is dark or light? Honest question considering you're correcting the clear coat. I watched a junkman video where he sorta laughs off polish for dark paint vs light paint
Tldr it cant. Sometimes more fillers are used for darker colors because it's easier to see fine scratches In dark paint. It sounds like a glaze. Fillers are a no no for experienced detailers. He's basically testing the fillers. A true compound, polish and wax would last way longer and probably look better. A glorified infomercial or product demonstration, Unfortunately Apex detail is selling out and becoming a paid influencer. This always happens when they get a large enough following. Dpc was the last one to go this way. I was suspect of his promotion of the xtreme solutions detailer spray. This just confirms it for me. Time for me to move on to newer smaller detailers and mostly sticking with independent reviews and testing from forums etc.
@@taz4100 if someone is trying to sell me a product thats made for darker colors I think I'm calling BS on that one. The filler aspect makes sense but then again all it's doing is hiding rather than fixing which is fine if that's your goal.
I was thinking the same thing, would love an answer on this.
@@DavidStillman78 maybe tomorrow haha
@@taz4100 Well said buddy 👍🏴
Thank you!
Would love to see the 404 helios on a white pearl. Hopefully it turns out as good !
Do I have to wipe this off with a stripper before putting a coating on??
Brian are any of their compounds worth looking into. Thanks
What’s the best acrylic paint sealant to compliment with this? Will Wolfgang paint sealant work with this? Thanks
Excellent product. Is this similar to Car Pro Essence it how it works or is it completely different??? We have single stage paint so would suit them I imagine.
Great stuff Brian. Only down side is keeping a vehicle down for 48 hrs. To clarify, you are saying wait to put protection on top or it can not be used in the climates or be outside?
I think you would be fine to add protection right after. No other polish or glaze I’ve seen makes you wait to add protection. I just ordered some and just going to layer it right after
Hi Brian. I noticed you used a yellow pad, could you have used a less aggressive pad? Did you base the pad choice on experience or did you do a test spot to determine the pad choice?
Both. Even with experience...I still do a test spot.
John Schiesser , isn’t rupes yellow second from least aggressive?
Chris Atchley I think he said he was using Maxshine pads for this video. Is that correct Brian? Thx
Can u explain by what you meant by acrylic. What product do u use for acrylic?
Acrylic is a type of plastic that resembles glass.
You sold me on this one, plus who can resist a coupon code?? 😀 I think this will be great on my wife's Jeep, it's a bit darker and hopefully this will help fill some of the little flaws.
Learned a lot from you! But I have info overload! LOL. Would love some suggestions or video on how to maintain a brand new pearl white car, like a 2020 Subaru Outback with the plastic trim. Something your college graduate daughter could do (hint). Thank you!
Just ordered the Sucker Jr as a Christmas gift to myself. Nice to see how products work before I shell out social security dollars on a hobby car. Thanks for your research, testing and evaluation.
Great video... sweet polish!
Insane turn around and crazy gloss unit readings as well. but what kind of protection will keep these numbers? will a wax or a coating bring it down?
I know, late to this party... Do they make one for white paints?
I have just subscribed to your channel. Direct instructions and information and no silly antics or music. I have 2 questions. Do you still like/recommend Meguiar's synthetic sealant? I am getting ready to ceramic coat (Avalon King) a friends car. What polish would you use to remove swirls and scratches? I knooowwww there are tons out there. Thank you
Brian, will 403 work to correct minor imperfections on a coating like Essence+ or will it remove the coating? I have the good fortune of living 15 minutes from Extreme Solutions in south jersey. The guys there are great!
I want to layer a ceramic coating over lvr403 after it cures 48hr. Do I use a IPO on the 403 before applying the coating. I dont want to ruin the beautiful look of the 403 polish
I would also love to know thoughts on this. Seems like an IPA wipe would remove the fillers left behind by the 403…. Can anyone help with this ??
I’ve got lots of Xtreme Solutions products... they work great! 👍👍
Which of there compounds have you tried.
Kris Hi, sorry, just saw this. The LVR2 is great for getting out deeper scratches, and I really like the dynamic cut compound as it gets out lots of scratches and it’s very easy to remove with no dust. Then follow up with their ICE FTW! 😊
Reminds me of Poorboys Black Hole.! What's the point of an expensive gloss meter. If you don't take readings from the amazing looking cars?
Where is the best place to buy these products?
Brian, this stuff looks awesome. Once the 24-48 cure time is done what if anything would you use as a protectant?
You could use anything on top of this.
Apex Detail my 2020 silver Ford Escape titanium hybrid is in great condition and no scratches that I see. Would u recommend me using LVR 403 with like a soft polishing pad to amp up the gloss before sealant and wax or I also have Sonax perfect finish but since I don’t see any scratches I’m thinking no need for aggressive pad or compound. What do you think?
Wow! Looks like a great product and not unreasonably priced either!
can it be used by hand?
Hmmm I’m out of polish angel glass coat wonder if this would accept spritz or high gloss?
Wow, that thing pops!
great video and product review good friend. looks like a homerun.VERY well priced. so it's basically polishing glaze?would u recommend using rotary or da?b well good friend
Hi Brian, thanks for another great video and review. Being over in the uk it can be difficult sometimes to source products you review on this side of the pond. But as I was really blown away by this product I reached out to Aaron at extreme solution to see if they would ship to the uk. Aaron advised the product is sold in the uk under a different name, Final Finish and can be bought through autobright 👍👍😀.
Keep up the good work even though it costs me a lot of money....lol
Hope you have a great Christmas holiday and New Year and look forward to more videos in 2020!!
All the best, Andy 👍
Ps Amazing customer service from Aaron @ extreme solutions
I must say a big thank you to you Andrew for your comments - really appreciate you taking the time to post.
Is there similar product? I live in Sydney Australia but can't find it here
Im a beginner at correcting paint and i was wondering if this would be a good product for a beginner. My black car has minor defects not terrible but definitely there. And which pad would you recommend using with this product on a panel with swirls and minor scratches.
I can’t find more lvr 403 anywhere!!!!
Can I put a spray ceramic sealant over this? Do I have to wipe with ipa first or will that ruin the idea?
Going to try this one.
Brian you talked about 4:03 but displayed two different products what is the difference between the two
Looks like LVR 367 ICE Polish. It's a bundle with 403 and 404
Will this work with a urofiber 50/50?
Which brand microfiber pad is that? You said microfiber, but the orange color is throwing me off. Thx Brian
Does it not stain trim like the last cut and optimum hyper system?
No staining.
What speed are you running the polisher on? Please and thank you Bryan.
correct me if I'm wrong but 403 doesn't protect much, it makes it shine. What would YOU use as a long term protection to put on top
Brian what type of microfiber pad was that? Was it the Uro 50/50 pad? Thx
Looked like the other one they do, the finishing one as it was all black. Not 50/50.
Will this with an aggressive enough pad remove an old ceramic coating? And, if so, would you want to do the a pass to remove the coating, then a second to lay down the acrylic, or would one pass total be sufficient?
What pads are you using in this video?
MaxShine polish pads.
Man your investment in polish pads must be insane.
Keep the stuff coming Bryan. This is FUN, and educational.
Brian, did I understand you correctly- you can apply a ceramic coating over this after fully curing? Just cautious because of how much the coating companies stress the paint being completely bare.
Nice video, Brian. My question can you lay a ceramic coating since it has fillers. Thanks again.
Brian, I should have asked this in my last post..... for us mere mortals that don’t have a shop large enough, what do you recommend doing for the cure time of 24-48 hours. I have a full size pickup and was thinking of purchasing some type of cover to use while it cures but I am not sure if this would affect the time to cure or cause the cover to do a zen thing 😉 (become one with the new finish). Obviously it would need to be protected after it cures. Thanks.
Just received mine. Good size bottle for 11 bux! Just curious what pad is that in this video and can you recommend a pad? Was thinking trying the new euro fiber compound and finishing pad possibly.
How do you think this product would compare with an of the Meguiar's mirror glaze polishes, thx Mario.
HI, what would be a good combo with xteme lvr products, to remove scratches and swirl, then bring to an amazing shine, and what would be the best thing to protect, coating, sealant or topper
Would you use this after a heavy cut compound in a 2 step polish to remove the hazing and bring out the gloss on a black vehicle or would you suggest another product?
Looks like a def. keeper!!! Any idea of the durability if no other protection is chosen or used?
You can stack your protection of choice on top. I have tried everything. Durability on its on is a few months.
What a polishing and sealing glaze? It contains a sealant? Stage 2 to Stage 3 ? I know compounds, polishes but i have no clue what a glaze is? is this a finishing polish?
Brian - I have a 2017 F150 with "white gold" paint, a champagne like color. I have some very light scratches and I would like to make the color pop. Should I use LVR 403 or 404 for this color?
Does lvr403 stain rubber?
I believe is the best for black cars right?
What type of protection is acrylic? Its an older term I have seen with Klasse products, but it isnt talked about much?
acrylic is a type of paint like enamel. I don't believe it will provide a protection, but adds strength to the paint. Most products that have fillers in them fillers go away by first wash or rain, where as by the explanation of this product it is more of a permanent filler.
Acrylic is a clear plastic that resembles glass. Very similar to clear coat.
Can you tell me what the best compound and polish is if your doing it all by hand
Try Turtle Wax 3 in 1 compound.
Hi Brian, I'd like to consider using this on a grey 08 Honda. I'm looking to try a paint enhancement with the 403 then add TW ICE for my 1st polishing w the Griot's G9, how much product do we need for 1 or 2 cars and which pads would you suggest ? Thanks
Do you think this can be used to polish carbon fiber panels?
Can the new turtle wax polish and wax be used as a base for a ceramic coat or should I be a polish that gets stopped with an ip solution?
How will this look on white paint?
Hey what blue polishing pad is that ?
Great video Brian ! Dang ,as we say in the South ! I got to get a pint of that stuff ! I have a lake country white polishing pad ,would that work okay ?
Absolutely.
What I noticed that it looks like you can cover a larger area than with other products. It seems like a great product. Can one cover a larger area at a time with this product when it comes to polishing with a polisher?
Is a 100 gloss units the highest you can go?
& have you ever seen one Sir?
u can go over 100 on gloss readings.....ck out the video on graphene brian did as he hit 101 or 102....there is also another video where he hits 103 but cant think of it offhand. I recently met with Jim lafeber…..founder/owner of dr beasleys products and he too has seen/reached over 100+
yes, ck out video about graphene
@@johnketuroskey6293 100+ GU on Dr. B's products? If so which ones? I love his plastics conditioner and tire conditioner products.
No...you can go much higher.
@@apexdetail85 would this be an option when u do lexus in spring?? fire agate mica(dark brown copper/gold flaked metallic) will email pics if u still don't have....have a good da
When I asked xtreme solutions u can apply wax directly after no need to wait till it cures
Do you need to wait the full 24-48 hours before coating?
How's this compare to turtle wax hybrid ceramic polish and wax?
will it work on a sterling blue color car like corvette, the color is great but like you said a bit more pop, now I do have a ceramic on it.
If it is a dark blue...sure.
How long do you find an acrylic product like this will last in terms of gloss and filling without a topper? I know it varies depending on how it’s maintained but roughly
What kind of pad do people need to use thus stuff orange white black??
Which pads did you use on the Honda ? This is almost like a 1 step but you can add wax after 48 hours .. would white or orange LC CCS pads be ok to use ?
How does this compare to Klasse gloss wise?
THis or 3d one for best gloss and ease of use
Max shine 15mm 900watt or the pro 1000, is the difference worth the extra money for the pro?? Thanks JP IN SD.
how does the cut and finish of this compare to sonax perfect finish? and if you topped this with say sonax polymer net shield would it increased longevity? I
Isn't one of the things that made liquid glass so good was the fact that it was an acrylic and not actually a wax?
deepsquat600 yes