Thanks for the video, it was very helpful. I was able to get my VFD to go forward with on button and reverse with the other button. I am trying to get it to go 1200 rpm in forward and 450 rpm in reverse. Would you be able to help guide me in the right direction. Thanks again
Honestly only way to do this is to dig through the manual for your specific drive. Most modern drives allow for more than one speed setting. You should be able to configure for two different run speeds for the two different directions.
Sir, my Omron mx2 inverter Error E30 showing ,after factory re sett all parameter added, but H103,H11,H112,H113. Parameters not possible to access, because H050 below and H200 above only parameter showing how to rectify this issue
Thanks for the video, it was very helpful. I was able to get my VFD to go forward with on button and reverse with the other button. I am trying to get it to go 1200 rpm in forward and 450 rpm in reverse. Would you be able to help guide me in the right direction. Thanks again
Honestly only way to do this is to dig through the manual for your specific drive. Most modern drives allow for more than one speed setting. You should be able to configure for two different run speeds for the two different directions.
Sir how to use Reverse & Forward
Configure the multifunction inputs as so: th-cam.com/video/p0NSQ39v8OI/w-d-xo.html and th-cam.com/video/pe627kwSB_4/w-d-xo.html
@@bigbadtech thank you sir
Sir, my Omron mx2 inverter Error E30 showing ,after factory re sett all parameter added, but H103,H11,H112,H113. Parameters not possible to access, because H050 below and H200 above only parameter showing how to rectify this issue