no info about actual timing of the pump.. the pump has oblong slots that it mounts on, and can be rotated in either direction. that's the info I'm looking for. the pump has an arrow cast into one of the flange mounts, but there's no corresponding mark on timing case.. any rotation can screw timing up.
I have a case 1835c with a contental diesel with a stanyadyne pump. Can i just mark it and unbolt it then bolt it back in after rebuild? Or to i need to time it after rebbuild
Hi, currently rebuilding a case 450 with an iveco NEF445t/M2 F4GE0454F engine. Will be installing new injectors and I would like to check the lift on the pump. What is the correct lift? 1.0mm? Thanks in advance, can’t find accurate info anywhere
Can you help a guy out with a roosa master pump on a JD 2020? It's a late 60s model 4 cylinder, can't find any literature or parts lists. Has banjo fittings around the pump for injector lines. Can even find a picture of one. Hook a brother up ...
camshaft has one marked gear point (it's a circular mark between two teeth) that align with a tooth on the crank drive gear with either another circle, or a ground off gear point, as in my 445/m2.
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.4 (4/4)](http://i.ytimg.com/vi/d3l5rxl5CVo/mqdefault.jpg)
no info about actual timing of the pump.. the pump has oblong slots that it mounts on, and can be rotated in either direction. that's the info I'm looking for. the pump has an arrow cast into one of the flange mounts, but there's no corresponding mark on timing case.. any rotation can screw timing up.
Good video thanks for the help
I have a case 1835c with a contental diesel with a stanyadyne pump. Can i just mark it and unbolt it then bolt it back in after rebuild? Or to i need to time it after rebbuild
Hi, currently rebuilding a case 450 with an iveco NEF445t/M2 F4GE0454F engine. Will be installing new injectors and I would like to check the lift on the pump. What is the correct lift? 1.0mm?
Thanks in advance, can’t find accurate info anywhere
Can you help a guy out with a roosa master pump on a JD 2020? It's a late 60s model 4 cylinder, can't find any literature or parts lists. Has banjo fittings around the pump for injector lines. Can even find a picture of one. Hook a brother up ...
No problem. Call me Monday am. Phone number is on the website
What does the marks on the cam shaft look like and which piston is number one
camshaft has one marked gear point (it's a circular mark between two teeth) that align with a tooth on the crank drive gear with either another circle, or a ground off gear point, as in my 445/m2.
piston closest to front of motor is #1 piston.
What did you pin the flywheel with?
Good question. I don’t remember off the top of my head. I’ll ask the other guys in the shop. See if they remember
They sell pins on eBay
my engine doesn't have the cam gear lock pin, just a damn plug.
What did you end up doing on your 450? I am having the same problem.
A horizontal dash