Thanks, I was trying to figure out how to get them out. Usually it’s a twist. I pushed, pulled, messed with the tabs on the sides and nothing was budging. Then found just the tab at the bottom, pinched it upwards rhen wiggled like you said and it came lose.
Excellent video! My low beam headlight bulb just went out on that same side. Note: There are (3) tabs holding in the light bulb part after the connector came off. I had to put back the connector and push down, then pull it out after I pushed on the other 2 tabs with a flat head screw driver - it finally released. I had to push on two of the 3 dimples of the lightbulb with a Philip's head screw driver next to where those tabs were located to make sure the bulb was locked in again by those same tabs that wouldn't let it go before. (It was NOT a simple pull straight out to remove the bulb and push straight in easily to put back the bulb as some videos explain).
Great video. It’s still hard to understand how to get the tabs to release but you did a great job explaining it.
Thank you for the video. It helped me !
Thanks, I was trying to figure out how to get them out. Usually it’s a twist. I pushed, pulled, messed with the tabs on the sides and nothing was budging. Then found just the tab at the bottom, pinched it upwards rhen wiggled like you said and it came lose.
Excellent video! My low beam headlight bulb just went out on that same side. Note: There are (3) tabs holding in the light bulb part after the connector came off. I had to put back the connector and push down, then pull it out after I pushed on the other 2 tabs with a flat head screw driver - it finally released. I had to push on two of the 3 dimples of the lightbulb with a Philip's head screw driver next to where those tabs were located to make sure the bulb was locked in again by those same tabs that wouldn't let it go before. (It was NOT a simple pull straight out to remove the bulb and push straight in easily to put back the bulb as some videos explain).
Great video do you have one to change fuse on 12v cigar lighter in armrest ?
Any tips for reaching the full beam bulb? It's just that little bit harder to get at! Cut my hand up nicely trying it.
Thank you, this was a lot of help.
Glad it helped!
Very helpful video!!!
Glad it was helpful!
Are there any brighter light bulbs for BMW X3 2013, maybe LED, or similar?
Led and Xeon bulbs will cause mot failure best bulb is the osram night breaker 200% brighter and will not cause mot failure
I replaced the bulb and now everything is working however I still have the error being displayed on the dass
Hi I have HID d1s-d4s headlight bulb products, can you help me introduce how to install and I can give your product freely.
Meew thanks
Anyone can replace this bulb. We want to know how to replace the dip bulb on the drivers side. 😅
Why does it have to be so complicated
Thanks mate perfect
👍🏽🙏🏽