Perfect video! I am just thinking about buying ender 5 pro and this helps me a lot. What you think about overall printer's noise? Are the fans loud a lot or are they quiet? Thanks!
Great video! But I have been having an issue with printing the height of my prints. It seems that the actually print doesn't look like the sliced file on cura. The heights are different. Do you know what could be causing this?
Mmm never had that problem and I which I could help you but I don't think I have the right answer sir. I never had that problem..the only edit I do with cura is the scale up which upsizes the design in proportion
Hi Jack, there is a video in TH-cam that explains how to solve that problem. The option you have to change and setup for your 3D PRINTER is steps/mm in the screen of the PRINTER, control --motion.
I bought the ender 5 pro and I was able to print the dog and the pig that was already on the sd card just fine. But when I tried to print things from online it started to print on the edge of the print bed. I used kura and the slicing software that was in the manual but it never worked. It's like the printer is misaligned or something. It was centered in cura but not when I started printing. To make it worse, this one time it started to print the first layer offsets as usual and it printed to second layer next to it. I don't know if it's the software, the sd card or the printer. I'd appreciate it if you could help me out because I don't know what to do.
Where do you get your designs? I never had that problem. I am no expert not really sure how to help you. A lot of expert can help you in reddit though. Just look for ender 5 pro group. Anyway, I download designs from thingiverse.com then upload it directly to cura and I don't normally do adjustments, only the scaling (making it bigger). The fact that you were able to print out the dog and pig nicely, I don't think its the bedding. Maybe your cura setup is wrong? Make sure you capture the right ender in the setting and the right dimensions of the bed
thanks alot this has been very helpfull as i have never had a 3d printer before
Thanks for watching sir!
you can change and put direct extruder above hotend
Nice video sir
Thanks for watching 🙏
So everytime i try to hest mine it says something about a preheat fail and please reset.do you know a way that can help me out with that
What settings did you use
To be honest, I used default setting.
Perfect video! I am just thinking about buying ender 5 pro and this helps me a lot. What you think about overall printer's noise?
Are the fans loud a lot or are they quiet?
Thanks!
Its white noise for me. Like I can sleep while it's on :)
And thank you very much for watching!
if you want to edit (make small change) to the design file , what software do you use?
Most popular is Cura. :) but frankly I don't know how to edit
Hello, I want to buy Ender 5 pro. Did you live any problems? Is the table good? Is calibration easy? Thank you..
Yes. Easy calibration. So far no issues. :)
Great video! But I have been having an issue with printing the height of my prints. It seems that the actually print doesn't look like the sliced file on cura. The heights are different. Do you know what could be causing this?
Mmm never had that problem and I which I could help you but I don't think I have the right answer sir. I never had that problem..the only edit I do with cura is the scale up which upsizes the design in proportion
Hi Jack, there is a video in TH-cam that explains how to solve that problem. The option you have to change and setup for your 3D PRINTER is steps/mm in the screen of the PRINTER, control --motion.
I bought the ender 5 pro and I was able to print the dog and the pig that was already on the sd card just fine. But when I tried to print things from online it started to print on the edge of the print bed. I used kura and the slicing software that was in the manual but it never worked. It's like the printer is misaligned or something. It was centered in cura but not when I started printing. To make it worse, this one time it started to print the first layer offsets as usual and it printed to second layer next to it. I don't know if it's the software, the sd card or the printer. I'd appreciate it if you could help me out because I don't know what to do.
Where do you get your designs? I never had that problem. I am no expert not really sure how to help you. A lot of expert can help you in reddit though. Just look for ender 5 pro group. Anyway, I download designs from thingiverse.com then upload it directly to cura and I don't normally do adjustments, only the scaling (making it bigger). The fact that you were able to print out the dog and pig nicely, I don't think its the bedding. Maybe your cura setup is wrong? Make sure you capture the right ender in the setting and the right dimensions of the bed
@@barracosoken I just redownloaded cura and I can only add the ender 5 or the ender 5 plus and not the ender 5 pro. Which one did you choose?
Ender 5 but I made sure I adjusted the dimensions. I don't think they gave ender 5 pro already during the time I downloaded it
@@barracosoken I think I know what did issue is. I selected the ender 5 plus which has a bigger print area. I'll try it with the ender 5.
@steven[]seagull it worked. I just used the wrong setting.
i think is Singapore
i was looking out the window missing the food!! i knew instantly. hhaaha
Yes! Good one guys
So you just pick Ender 5 in Cura for printer profile? The Pro uses same exact initial settings as the regular Ender 5?
Yessir
I tried printing the dog from the SD card you printed but it came out like a wicker basket
its easy when you dont have leveling problems, this damn anycubic i3 mega s, is making me mad lol.
Yeah tell me about it. :( good luck with that man