My Van Drawer Couldn't Handle The Weight
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- Head to www.squarespac... to save 10% off your first purchase of a website or domain.
BUY SBC MERCH HERE
sbc-store.crea...
I got these massive drawer rails from Fullie Hardware here in NZ www.fullie.co....
Gaston talking about the Hikoki router • The Tools Every Carpen...
That Shinwa saw guide that I used with the router piranhatools.c...
MUSIC
XPanda "1994uv Sick" / 1994uv-sick
Cinsaku "Hibiscus" / hibiscus-w-chinsaku
Xpanda "1 2 Step" / 1-2-step
You can support SBC on Patreon - www.patreon.co...
Donate here if you would like to help the channel - www.paypal.com...
I'M ON INSTAGRAM www.instagram....
The below are affiliate links. I get a small percentage when you buy using these links. It does not cost you anything extra, but helps supports the channel. Thanks!
My Work Wear
Work Pants euroworkweardi...
Vest euroworkweardi...
Kneepads euroworkweardi...
Belt euroworkweardi...
My Tools
Tool belt amzn.to/3dXMZnk
Tool belt shoulder straps amzn.to/3AI0VLU
Hammer with wooden handle amzn.to/3jRhQ92
Rubber grip for hammer amzn.to/3jTM7UE
Speed Square amzn.to/3yAaE5f
Makita Circular Saw amzn.to/3qYzaKH
Track Saw amzn.to/3dV9wkF
Awesome ratchet clamp amzn.to/3dSGa6s
Impact driver (main drill) amzn.to/3xDmBat
Other drill for pilot holes amzn.to/3yAYjh4
My Table Saw amzn.to/2UzuOxp
My favourite vacuum (newer version) amzn.to/3yxss0S
Full face mask amzn.to/3hH4Cce
Ear muffs amzn.to/3yNAWBl
Green line laser level amzn.to/3yqYdJ0
The Camera Gear I use
Main Camera amzn.to/3AD2if5
Backup Camera amzn.to/3jTGTbv
Main Lens (main camera) amzn.to/3wp0hzU
Lens for Backup Camera amzn.to/3jWaFfU
Microphone amzn.to/36pNWAA
Tripod amzn.to/3yxSeCb
Headphones amzn.to/3xqm2R4
Drone amzn.to/3xp9OrO
Aeropress (Coffee) amzn.to/3ijpvdQ
SEND STUFF HERE
PO BOX 3506
Richmond 7050
New Zealand
Disclaimer:
These videos are intended to provide information and inspiration only. If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. Scott Brown Carpentry Ltd does not take any responsibility for any action taken as a result of the information or advice on this TH-cam channel and shall not have any liability in respect of any injury or damage that may result.
To view full disclaimer, click here: www.scottbrown...
![[#SHORTS CLIP] ใช้ของของตัวเองไปเลยสิคะ l ซานิเบาได้เบา l One Playground](http://i.ytimg.com/vi/Ea_mTywx2p4/mqdefault.jpg)
I sit at a desk all day...these videos help my mental health. Cheers Mr Brown.
Scott Brown is the coolest carpenter on Earth.
Coolest guy on earth! I would happily let him adopt me
He sure is!
@@bwlelectrical Lol
Pardeau is cooler!
I built drawers in my truck that are inspired by your van and I couldn't be happier. Such a good use of space, it basically doubles the amount of space in my truck. Thanks for the great content and ideas!
Remember that you have probably overloaded the drawer if the front wheels come off the ground when you fully extend it.
makes changing front tires easy
Lol!
@@ScottBrownCarpentry Hey bro just wanted to know how you're doing with this lockdown, Maybe a new video idea?? Haha
I feel so relieved when Scott Brown "messes up" a routing job, uses "the wrong" joint etc.
Makes me feel a lot better about all the botch jobs and mess ups that I do constantly.
Thank you so much for keeping it real!
As an amateur with woodworker, i typically feel overpowered with the entire arrangement th-cam.com/users/postUgkxrYREG3-7f1Aqk9ams3ZESRNzGnfdUtyQ . Be that as it may, this arrangements drove me through with much clarity and effortlessness woodplans. Works i now work like a genius. That is great!
Gday Scott, Josh here.
Just a thought but would adding a single leg, maybe on a hinge or something be something you’d consider adding?
Just noticed the flex when you lean on it. Could be a good addition as the added rigidity could even be used as an additional work space.
Really enjoy your content,
All the best,
Josh
1
i dont understand how your videos are THIS relaxing
He's a Kiwi. That's how they roll.
Time to make a zero clearance insert for the table saw. I made some for mine out of a polypropylene cutting board and now it cuts as nice as my tracksaw.
@@cmmartti thats why I made 4 at the same time. 90 deg, 45 deg, 22.5 deg and one for my dado stack😉
Watching this to relax on a stressful day.
Fan from Sweden here. I have a small garageworkshop, tip from a multiple small child father: nothing takes care of glue squeeze out like baby wipes. Buy unperfumated from the grocery store and keep in your van👍👍 Thanks for great content!
I made my own rails for my van. Quote was $1500 for runners to do what I wanted so I made mine from 20mm box pipe and skateboard bearings. Works well and can take heaps of weigh (140kg per bearing).
Nice one
Adding a small notch to the hinge side of the drawer to let the top boxes open up smoothly without having to pop them out somewhat would be a nice touch.
Lovely build mate. I liked that you left the cut edges exposed for a bit of contrast. Wasn't so sure one putting a black fascia on panel though. I though you might revamping the whole van.
I'm sure people have already said this but painters tape on the bottom edge of the table saw cut is your friend. A sharp blade helps too :)
Just add roller bearings to the underside of the drawers. In that way you can reduce the load on the drawer slides
Might not need it when they’ll hold 227 kg;)
Yes!!! please do a review on the Hikoki laminate trimmer/router.
Hey Scott I drilled some tiny holes in my makita sustainers and put a bit of nylon string from one to the other to make a handle. Really helps when pulling them out of shelf. 👍
Wawaweewa 😂. I like!
Hey Scott, have you tried making a zero clearance insert for your job site saw? It'll be an easy project and should help minimize tear-out.
Masking tape is your friend
Great idea
Hey Scott, you can probably also get a Zero clearance plate for your table saw or make one.
This will give you less tear out
Nice Job man
What is it about Scott's videos?! They're informative, interesting, and strangely relaxing. Maybe it's the music or that occasional B-roll of life in New Zealand. Thanks SBC!
Whether using track saw or table saw, if wanting to prevent chipping in veneer or finer plywood, you can masking tape over the cut line before the cut. Also performing the cut more quickly can help.
Scott Brown is one of the cleanest chippy I have ever seen
Yes I agree. but clearly you've never been to the Northern hemisphere /Europe.
@@TheOne-er7nk must be where he got the habit when he started working in Scotland and Europe 👌
@@TheMelbournelad Yeah his work and channel are almost as if he's come down to us from another league, hehe.
it's funny, i'm a builder and i am often so tired after work, but watching you build just makes me sooo excited. Love your work bro.
For your system 2s get some 50mm webbing cut a strip. Fix it to the back and let some hang out of the front. All you need to do is tug on it and will eject the box easier than trying to pinch it out. A bit the a batter compartment with the ribbon to help remove batteries.
Always comforting to see a video from you Scott, I spent a couple weeks just watching every video and now i feel like i have withdrawls waiting for the news to come!!
Impressive drawer sliders, they look like they'll hold an Abrams tank.
So the ply has been there since last lockdown and you've just managed to squeeze it before this lockdown. Close timing. We had just started back at the same place as lockdown March 2020. Part way into a concrete post and panel Slatecrete fence.
100% right about that blade on the table saw Scott. You need a real fine blade to cut that veneer. Great work man, love the videos.
Looks great. Hoping to fit out my mini van with a similar system soon. I appreciate you sharing all the improvements so I can avoid those mistakes.
Hey Scott, love the videos! Also very nice looking drawers but I thought maybe as a small upgrade, if you made cutouts for systainer 3s locks, you could open them without needing to take them out of the drawers. Just an idea to think about. Best wishes, Jonas from Norway/Lithuania. :)
Edit: Added love.
As a follow-up to this: Scott if you watch yourself opening the sys 3 in the drawer, the action of the lid actually lifts/levers the whole sustainer up. This will be putting strain on the hinge and will mean that the box can not be left open (for example while searching for a bit or something in the box) without you holding it, as the weight will automatically be pulling it down. Scott if you cut/rout down the side piece slightly this won't happen. Of course then you lose your auto-close mechanism, which you designed in deliberately. Right? 😜
@@davidlowson100 He could just add some small spacers under the boxes to lift them up as there's plenty of room above
@@davidlowson100 Did not notice that before, but as Scott wrote in his reply maybe spacers would help even better, there is some room above the boxes 😊
Kinda makes the point of the systainers redundant doesn't it? Keeping all your tools in a small, easy to carry box saves you having to carry a bunch of loose tools back and forth to the van.
It would be convenient for when you only need one or two tools but how often does that really happen?
@@wearsjorge55 On a job suite yes, it would be stupid to be walking to the van and back, but having an option for when you're in need for one tool, like next to this garage, it might be nice to be able to pick just what you need. 😊 Not judging the build, just giving some ideas for added features 😊
Edit: wqlking
I can’t recommend highly enough the Forrest Hi-A/T blade for incredibly clean cuts both top and bottom. They’re the only blades I use in my shop.
I'll look into it!
Homemade zero clearance insert plate will help clean up the underside cut on the table saw. Won’t beat a plunge saw though.
@Scott Brown carpentry, now you need a Foam cutter so you can use foam/insulationboard to make custom fits for your stuff.
Scott ... you jinxed it, talking about doing stuff with ply during lockdown, how dare you :p
😂
Hope you're keeping busy during lockdown again Scott. Stay safe mate
If it was perforated with holes would that help reduce the weight without weakening the structure? Might also allow dust etc to filter to bottom which could fall into a tray. Wheels are a good idea. Loving the attention to quality detailing
Hi Scott, I like your ideas and builds are really inspirational and this drawer is great! As you said you can use a larger piece of pipe to store your recip saw, in the space left (from the side) you could use to store batteries, so you have them always at hand without opening a systainer, or if you really want to get funky, mount a charger over there, hook it up to your van electronic system (should find a charger on 12v 😎) and charge your batteries while you drive 😀. Keep going this way!
So nifty! Excellent cabinetry SBC👍😎
Well Scott I see you on the Belts and Boxes you tube site and he said If Scott Brown said you do, Hamilton NZ
OMG! No pencil marks! Scott You're Fired!
😭
Very cool. Maybe a Little hole cut behind the lower boxes so you can nudge them out from behind when they're heavy? 👌
Love the telescoping brackets 😁👌👌👏👏👏
I just get so happy watching your videos man!!
Greetings from the colonies Scott,
I have the same style drawer slides in my pick up truck. I built 3 drawer slides and with in 6 months 5 of the locking tabs have broken off. Be careful with those slides. They can handle the weight but the clips can’t.
Nice work. They sell the rabbet router bits for cutting rabbets/rebates along the edge of your workpiece. I know they have some sort of sled for the router so it will ride on your Makita track for cutting the dados.
Glad the drummer is still at it
Nice upgrade on the glides. Always feels good to make things right.
Great drawers beautifully made .. problem here in London being a jobbing chippy .. you wouldn't be able to use drawers .. because you need the length of the van to access them . Parking is a major headache
I am almost done with my first apprenticeship in Germany. But since I watch your videos I am seriously considering doing something like carpentry or other building related afterwards as a second apprenticeship.
Keep it up mate, very cool videos.
Greetings from Germany ✌️
Fast cap makes some third hands that are very similar to the bessey clamps you used to install the drawer into your truck and for what I do they are prolly the most important tool I use. We mitigate water damaged cabinets without pulling the counter and something has to hold that granite up.
Scott I use a 80 or 100 tooth blade to cut plywood along with a zero clancere insert on the table saw.
Very nice Scott I like the ingenuity so much tools such little space
Good job Scott!
Like many, when I first started out I was using a personal vehicle, which often meant having to pull half the stuff out to get to what I needed. This is better.
I use a piece of green tape over the area I’m cutting if it has a laminate/ veneer whatever. I haven’t had any chips come off on me yet.
excellent video Scott...Many thanks
Sorry for my english but, Your van fittout is noe off the best i have evner seen in a smal van i have the same system in my van but i have my dropp saw and my tavle saw om top of the fitout so i font brake my bak every time i lift it up
Put those Sys2s in backwards so the carry handle can come up sooner :)
I made 2 drawers and the top slides in and out , all I used was furniture wax, my drawers weigh hundreds of pounds, pocket hole and screws with glue, all 3/4 plywood, when u have to get to the stuff in front u open back doors slide the top back and use side doors to get stuff out of the front of boxes, u have to have holes drilled in front because when u pull out drawers it needs to suck air to open easy, no need for metal drawer slides or bearings, wood on wood works amazing. My drawers are 19 high, I can open both drawers out pretty far and the sliding top holds them in, no need for a middle support.
4:08 looks like you're about to review Makita's new cordless 18v bong
40v for a real good hit😉
I bought a track saw last year, had to wait 3 months for a 2.6m rail but my god. Worth it for cutting ply and mdf.
2:58 curious to know if you were to raise the jobsite table saw blade up so the button of kerf is at the top of thickness of material if you’d get better “cuts & less tear out/damage”. Just a thought, and how I was taught to use a table saw. Not sure if “correct”, but been doing it that way for years now 😉
Nice build, very nice, you always produce AWESOME builds👍🏻
Cheers✌🏻
Hey buddy it doesn't reduce tear out and damage, that method only increases the safety so that the blade isn't sticking out more than it needs to.
Clean cut is all about the blade type, get a blade that has more teeth (a finish blade). If you want you can reduce tear out with taping (mainly the bottom side) so the veneer is not ripping from the plywood.
@@connectedlocally1868 reduces the likelihood of kickback too
@@connectedlocally1868 It does marginally reduce spelching compared to a full height cut, with something like 12mm plywood if you set the blade so that the bottom of the gullet is at the top of the material the travel of the blade's teeth is about 45-degrees diagonally through the material whereas with the blade at its full height the angle is probably closer to 70-degrees downwards which naturally is going to cause a higher chance of spelching. The ways to reduce spelching would be to use a correct blade for the material you intend to cut, for a small site saw like the one Scott has you'd want something like a 60 tooth blade with a triple-chip-ground tooth geometry for cutting two-side laminate plywood which will give good results, you can also install a "zero-clearance" mouth insert to reduce the opening around the blade to where it's practically touching the teeth, which will give the laminate/veneer support right next to where its being cut much like how a track saw track rubber stops spelching by virtue of being right up against the blade preventing any fibres being pulled upwards.
Nice... Going back and fourth on my next vehicle ....van or pickup
Nice work Scott. Pleasure to watch
Quite often these drawer runners are rated at the shortest length available.... so a 250kg rating is for say the 500mm runner then it drops as you go up in length. They don’t tell you this though
Looks good. Maybe 3.0 - not make the walls so high so you can open the 3's as it looks like the lid caught when you got the battery out. But love it. Looking at doing something similar with my van. Hope you and Jess are staying safe up there in Tāmaki Makaurau.
The clamps....the red handle things...what are they I need some on the van, absolutely amazing
Hey bro, long time watcher, first time commenter. Love the vids! To avoid the veneer tearout on your ply. You can make a zero clearance infill piece for your tablesaw top. Easy enough to make out of ply. Chur!
Great job Scott!!, please stay safe.
Great build, more solid. are you going to reinstate the pull unlatch? Any need for a drop down peg leg to support the drawer while fully extended for loading and unloading?
Kind of like in an ambulance? Good idea.
Yes, I'll do the handle again , got to get some matching loops for the rope to go through. I think the weight can hold the drawer out ok, not a bad idea though!
You might use the area at the button to store parts and accessories in
All you need is your string thingy on the release and your set🔨
How’s lockdown treating you day 2 looks like clear sky’s so far
Nice job Scott
Love your system with layout. I'm awful with marking what piece goes where. This gives me hope.
Did you have enough plywood material left to redo the other drawer. It is just a matter of time before that one fails. The OCD in me couldn't stand to have mismatched drawers.
11:09 you could make a U grove or slot in the back so the lid can open freely.
hey scott if you tape the cut on the ply it can also help stop the splintering
Would you consider using construction adhesive instead of wood glue on the connections, along with fasteners, of course? Once cured, there is no way the connection would fail.
nice work and well thought out
That is such a cool pencil ✏️ 👍
I love your Van build videos
Sorry to hear you guys are back in lockdown
Sweet… 👍🏼🪚 The draw of glory…
Hi Scott, another great video. Is there a rule to determine how deep to cut rebates? 20% of the thickness or whatever? Thanks.
You say rebate, I say dado. Good idea whatever you call it. I'm surprised you didn't use a bearing on the shank of the router below your bit--that would give consistent dadoes. But I imagine what we see is the result of the tools at hand. Remarkable work nonetheless.
not good if you have lots of cuts but you can also run a strip of masking tape along the timber and then cut through, saved me a couple of times for those tricky one off jobs
Liking the metabo router and that hose adapter. Lot better than mine
nz back on lockdown now from midnight tuesday so must have been filmed before that
You almost think you knew what you were doing; that's how it should have been done the first time. Awesome, fix Scott.
Play safe from Elliot Lake, Ontario, Canada.
Nicely done.
Nice work Scott. Enjoy your lockdown holiday.
Lol!
You are a Master Craftsman Scott 👌🏽
cannot wait for the MK 3 drawer on his next refit.
Great job mate!
Much improved with the dadoes! Really like the orange laminate too!
Nice one!
Hey Scott - Love the videos!! What about using painters tape to reduce splintering with table saw cuts? Also, love to hear your thoughts on the Atlas 46 vests and aprons as a replacement for a tool belt?!
Good idea. I've considered vests but I run hot and would probably get too sweaty with all my gear on my body like that. I liked the look of the atlas stuff though, it seems to be well ventilated.
Not sure if it's possible but i would try to make the lower cabinets also slide towards yourself, got a feeling it would remove another hassle and you can leave the top off/loose. Cool guy !
Happy lockdown Chris.
My Drawers are made out of Zinc Flashing.
Less Mass, Less Weight, More space, and easier to use. Just ordered 6 Drawers from the Flashing fabricator. 2 x rear long, and 4 x side Drawers. Easy.