Good video. Something to keep in mind if you have an E55 or any W211 before 06 is that you should disconnect the SBC pump before working on the brakes. If you don’t the caliper can shoot out of the piston and crush your fingers.
Another option to remove the caliper is to remove the two 10mm internal hex bolts which secure the caliper to the bracket. They are easier to access ,,,torque to 110 N m.
So if I would install new rotors from FCP, it comes with automatic renewal of the wheel hub, correct? In this video, rotor comes off an old hub, then the new rotor installed on a brand new hub.
Good video. Something to keep in mind if you have an E55 or any W211 before 06 is that you should disconnect the SBC pump before working on the brakes. If you don’t the caliper can shoot out of the piston and crush your fingers.
How would you disconnect it tho?
You need a scan tool
@@CLK156BS you dont, just unplug the big connector on the back side
@@Financmajster
I work at Mercedes Benz lol
But okay .. 😂
Guess you never bled the brakes before either
@@CLK156BS nobody mentioned bleeding, for that you need the diagnostic tool, no need for that when just changing the pads and rotors
Yes more E w211 content!
yEah!
Love FCP Euro. You guys are great! Thank you 🙏
Our pleasure!
Another option to remove the caliper is to remove the two 10mm internal hex bolts which secure the caliper to the bracket.
They are easier to access ,,,torque to 110 N m.
Eres bueno en lo haces te felicito, disfruto mucho la forma como explicas 👏👏
I need to do breaks and rotors on my 2010 e63 but so hard to find the right rotors
Is it possible to put bigger brake rotors on a 2018 gle 43? Would I need to get a bigger brake caliper?
Can u plz do a vid with the w205 c63
So if I would install new rotors from FCP, it comes with automatic renewal of the wheel hub, correct? In this video, rotor comes off an old hub, then the new rotor installed on a brand new hub.
Yes they do it while you go for launch.😜
Hello bro. Is that new break disc better than amg? Thank you
Would these rotors fit on W219 CLS550?
To put the piston back with a flat screw drive before removing the pad brakes
Как называется фирма тормозных дисков?
I have a 2014 E350 Coupe and would like to upgrade to a 360mm rotor with 4 piston caliper. What are my options..?
Nun
180 Nm for caliper bolt is wild😅😮 lol
Does anybody know torque value for the two front 18mm disk brake caliper bolts? 2014 CLS550. Getting mixed messages, 110 nm and 180 nm. Thanks
just get them tight i dont do any dam torque shit unless its internal,been doing this for 25 years
👍👍👍
Some steps and tools are not necessary for the work