ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
Bartu abi seriyi devam ettirsen şahsen iyi olur hem bilmeyen az buz faydalanır hem kanal boş kalmaz hemde Bartu abi Bi nebze üni harçlığı çıkarırsın🙂
çok güzel ve detaylı bir bakımdı :D
Seri gayet başarılı ve güzel ilerliyor Bartu abi 🙂
Eline sağlık kardeşim ❤️
bayılırım bakım videosuna
Kanalın şifresini hatırlayınca olur gibi 😅Gayet güzek video
Adam bakım değil sanat yapıyor sanki.
👍👍👍
Ellerine sağlık zevkle izledim
Sıra Shock’a geldi Demekki Kesin urban ya da street geliyor bomba gibi hazır olun tg ailesi
Bartu abinin shocku değil.
Eyvah street yalan oldu 😀
eline emeğine salık abi
forgot to replace a few important seals. too much float fluid in ifp chamber. bearing assembly was worn out meaning air will leak.
Unfortunately, there are economic problems in our country, so everyone who sends them for maintenance cannot change the o-ring set, this shock has been used actively since the video was taken and there is no air leak.
5:18 How many psi did you put in? Can I use a regular pump?
250psi, use only shock pomp
@@BartuKarasu Why didn't you put air through the schrader valve and put air in there? Is it a process to make sure it works?
1:38
how did you make piggyback needle?
in the lathe
Reis tekimke
What oil did you use?
Fox 5w red
Fox 36, fox dhx 5.0 bakım yaptıracağım, ulaşamıyorum.
Instagram hesabim bartutg
@@BartuKarasu yazdım ulaşamadım
No nitrogen?Could you make a video on the new 2022Float X as well?
Nitrogen is bull shit
If somebody will send me 2022 float x, i am going to make a video
@@BartuKarasu 🤔
Bartu abi seriyi devam ettirsen şahsen iyi olur hem bilmeyen az buz faydalanır hem kanal boş kalmaz hemde Bartu abi Bi nebze üni harçlığı çıkarırsın🙂
çok güzel ve detaylı bir bakımdı :D
Seri gayet başarılı ve güzel ilerliyor Bartu abi 🙂
Eline sağlık kardeşim ❤️
bayılırım bakım videosuna
Kanalın şifresini hatırlayınca olur gibi 😅
Gayet güzek video
Adam bakım değil sanat yapıyor sanki.
👍👍👍
Ellerine sağlık zevkle izledim
Sıra Shock’a geldi Demekki Kesin urban ya da street geliyor bomba gibi hazır olun tg ailesi
Bartu abinin shocku değil.
Eyvah street yalan oldu 😀
eline emeğine salık abi
forgot to replace a few important seals. too much float fluid in ifp chamber. bearing assembly was worn out meaning air will leak.
Unfortunately, there are economic problems in our country, so everyone who sends them for maintenance cannot change the o-ring set, this shock has been used actively since the video was taken and there is no air leak.
5:18 How many psi did you put in? Can I use a regular pump?
250psi, use only shock pomp
@@BartuKarasu Why didn't you put air through the schrader valve and put air in there? Is it a process to make sure it works?
1:38
how did you make piggyback needle?
in the lathe
Reis tekimke
What oil did you use?
Fox 5w red
Fox 36, fox dhx 5.0 bakım yaptıracağım, ulaşamıyorum.
Instagram hesabim bartutg
@@BartuKarasu yazdım ulaşamadım
No nitrogen?
Could you make a video on the new 2022
Float X as well?
Nitrogen is bull shit
If somebody will send me 2022 float x, i am going to make a video
@@BartuKarasu 🤔