1:1 thickness / Forstner Bit = round wooden stick / upgraded version
ฝัง
- เผยแพร่เมื่อ 25 ก.พ. 2023
- It is an upgraded version of the hammer sound dowel jig.
You can make a round wooden stick the same thickness as the Forstner Bit.
▶Woodworking furniture channel of hammer sound: @WoodworkingDIY - แนวปฏิบัติและการใช้ชีวิต
![table saw lathe for wooden rods / tapered rods possible as well [woodworking]](http://i.ytimg.com/vi/yIZMZ7XJis0/mqdefault.jpg)
![Fc ครับ ขอแนะนำให้รู้จักกับ "น้องเปียโน" l [Nickynachat]](http://i.ytimg.com/vi/HQU6Q_IYTLo/mqdefault.jpg)
Some of these comments simply indicate how little people understand the value of this. I subscribed to your channel because of this video. This..is brilliant, and incredibly well implemented. Well done.
Your evaluation is an honor for me.👍😉
Good job 👍
Wonderful idea, wonderfully presented and executed. The dust collection was a terrific upgrade. Many thanks
Mis Respetos… ud es un SEÑOR CARPINTERO… su Creatividad vale Oro👏👏👏💪💪💪🙏🏻🙏🏻🙏🏻
Thanks for sharing your knowledge.
Thanks for watching.
Thank you for sharing tha technique. You made it so easy to follow. I will be making one for myself.
I enjoy all your videos, keep up the good work.
Texas
Thank you for a good look. Have a nice day.😊👍👍
Very good presentation and workmanship, thank you for sharing.
Thank you for watching.
@@망치소리JigShop скажите пожалуйста, какой марки, модели станок?
좋은 영상 감사합니다❤😊
정교하고 훌륭합니다 👏👏👏
감사합니다^^
such a nice jig, you are a master
Thanks for watching.
Very thrilling video. Full of dangerous cuts.
😉👍
Great build, love it!
Dowel is so expensive to buy in Australia so thanks for sharing the measurements to build one
Excellent.... thanks
Excelente trabajo, muchas gracias por el video
Very cool my friend
Excelente trabajo , muchas gracias!!!👍👍👍
Brilliant work!!
👍
I was wondering how you were going to set that Hex nut in that round bore. Was thinking, “I bet he uses a small chisel”. Nope… a Hammer. Love it.
Полноценный завод чтобы сделать палку для швабры
Muchas gracias por compartir, muy útil esta herramienta, reciba saludos cordiales desde Aguascalientes México...!!! 👍
Awesome 👍
Fantastic design AND video! I didn't understand the fence markings.
Also, can't you do your initial trimming INSIDE the box/jig (protruding your square stock only thru the 1st hole) to allow better dust collection?
One heck of a pencil sharpener
Que buena herramienta has creado. Gracias por compartir el video tutorial. Te vemos desde Nicaragua.
Thanks for watching.
Brilliant!
I had a similar problem about a year ago and wanted to slightly reduce the diameter of 1m long 22mm diameter bars (as a connection between 2 tubes for a frame), which in practice proved surprisingly difficult despite my small lathe (Proxxon PD 400).
At the time there were few videos on the subject and the proposed single blade "pencil sharpeners" were not a solution that worked well for me.
The one shown here is a wonderful version of the "round stick saw".
However, there could still be room for improvement, especially given the feared kickback from the rotating saw blade.
How about if the carriage also had a similar 3rd and 4th mount for the bars behind the saw blade?
This would presumably also make it possible to produce much longer rods and guide them safely.
Wooden spaceship gigafactory - the beginning
Do you have to keep adjusting the blade height?
ADMIRÁVEL:
CONGRATULAÇÕES!
0:16 - that is the biggest pencil sharpener I've ever seen.
🤣🤣👍
magnifique merci
Merci d'avoir regardé.
Echt eine clevere Lösung !!! 👌
Thanks for watching.
Excelente ... Top
Obrigado. Tenha um bom dia
Slick!
Great video! Make one out of Clear Plexiglass.
good idea👍👍
Для нагелей, конечно способ довольно расточительный. И даже если делать их с тоненькой палочки, то есть способы более простые. Но вот куда этот способ подойдет идеально, это изготовление черенков для лопат, граблей и т. д.
Meanwhile, I went to the Hardware, bought three Dowels and this was still playing.
Good for you. Here's your 🍪.
And I went and bought a lathe.
Mantap,,,🙏👍👍👍❤️
👍😉
👍👍👍👍👍
Love life hacks.
Do you have any plans for sale?
Ёпта, а я в школе рубанком на верстаке херачил такие палки-указки 👌👌👌👌
Полутупым лезвием, потому что кто то пытался стругать им доски с гвоздями и забитыми советскими шурупами))
👍👍😉
Нехватает с противоположной стороны приспособления для центровки, и тогда можно будет обойтись без дрели
입구쪽 구멍크기는 어떤 기준으로 바꾸는 것인지요? 들어가는 작재의 굵기에 따라 바꾸는 것인가요? 그리고 같은 것을 두개씩 만드신 이유는 뭘까요?
네 각재의 굵기에 따라 바뀝니다.
같은 사이즈 2개를 꽂는 이유는 각재의 양쪽 끝 부분을 가공하기 위함입니다.
한 곳은 목 봉으로 가공될때 입구가 작기때문에 입구를 잘 찾아가기 위해서.. 다른 한쪽은 드릴에 물릴수있게 가공하는 것입니다.
@@망치소리JigShop 아하..그렇군요. 결국은 같은 사이즈는 각재 양 끝부분 가공에만 쓰이는 것이고.. 본 가공할때 뒷쪽은 각재의 굵기에 따라 바꾸는 것이네요. 멋진 영상, 친절한 갑글 감사합니다. 팬입니다~~
감사합니다 ^^
Название видео прям соответствует результату. Получаются круглые деревянные палки, нафиг оно вам надо - решайте сами, но получаются. Кому нибудь нужны настолько часто черенки для лопаты, чтобы городить такую приблуду?😂
And the reason for this
👏👏👏👏🇧🇷🇧🇷🇧🇷🇧🇷
Не понял, нагели дюймовые, а линейки метрические. Это как?
device for making lot of woodchips )) and one round stick
Shut up.
My question is,you have a vacuum attachment. Wouldn't it be more efficient to use different size holes and have the blade inside the chamber
Watch to the end.
нормальная точилка для карандашей
🤣👍
please game for
Dude I love build idea but surely it's still dangerous. Have u though about using some type Mag Switch custom fit jig to go across the runners. Ok so the Mag switches are a bit expensive but safety comes 1st my bro. Look I'm probably way overthinking it. Sorry bro. It's a brilliant idea.. Ppl are building jigs for everything nowadays.. It's crazy how many are out here now for this that and the other.. LOL
If you think the jig is unsafe, you really have no business being in a shop around sharp tools.. Do yourself a favor and find something to do with Rubber and foam that does not need to be heated. Hate to hear stories of how someone manages to hurt themselves..
Вот смотрю и думаю - некие люди тратили силы что бы добыть целиндрическое , потом другие люди тратили силы что бы это цилиндрическое превратить в прямоугольное , что бы потом этот дол.....б превратил это опять в цилиндрическое . . .🤔
Would it kill you to use a guard and a riving knife?
Since when did you get put in charge of someone else's safety? If you need a Guard and Riving knife, go ahead.. We have had table saws and used them daily for decades without them. If you think either of them is going to stop Stupid from getting hurt, you are sadly mistaken...
@@MarkThomas123and you must be driving without seatbelt and air bags
@@b3arwithm3 I would disable every piece of that shit if I could.. I don't need something blowing up in my face if someone bumps into me. I have seen it too many times.. Don't need any of it..
Safety is Not Getting INTO the Accident,,, not some shit blowing up in your face after..
But, go ahead and drive like a nut and count on your air bag... I hope you have the experience of one blowing off in your face.. Then, see what you say about them.. Ha.. Cross your fingers!!
@@MarkThomas123 and you don't think a drunk guy would run into you. Only idiots don't understand the concept of insurance. Keep talking wise and tough!
@@b3arwithm3 I drive offensively first. That way, I am predictable. I watch for Defensive (non-confident drivers - Igmo's, Drunks, etc), so, see them way before they surprise me, and, I am ready to do whatever I need to do to avoid an accident, etc..
Insurance is something you pay just "In Case".. Doesn't have a damn thing to do with a Riving Knife, guard, etc, which is what sparked your wise comment.
Just how long do you think Table Saws and sharp instruments have been in use?
How long ago did the Riving Knives come out? I REST MY CASE!! Riving Knives and Guards were not made and installed for Professionals.. They are for the,,,, (non-confident drivers - Igmo's, Drunks, etc)..
And,, The Safety Police?? Who are they??
The guys who have been using tools without ANY Safety Measures other than Common sense for the last 100 years?? Or, the Dip Shits that don't have any, and want everyone to do what they do, so, they don't look stupid and Fearful for no reason??
Maybe.. I know how to use a table saw without one. And, if I ever take it off, I have ZERO reason to put it back on. Make Sense??
I'm not going to wear a mask because, you chose to get vaccinated to be safe from me, but, want me to wear one because, you don't feel safe AFTER you took one..
I just bone up my immune system and laugh at everyone wearing the Face Condoms.. Ha..Ha.. Simple Science and Physics and 5 minutes of research tells you that wearing a mask to stop a virus is like putting up a Chain Link Fence to stop Mosquitos.. But, you can SEE that the fence is a STUPID idea.. But, 3-5 Minutes on Google would do the same for the mask situation too.. Just one thing... THE FEAR FACTOR.. You just don't Know For SURE,, if you are Right.. Hence the Reason you guys buy SawStops and use Riving Knives and Every Guard you can find... It's pretty simple actually...
And, No.. The Only time I would wear a Seatbelt, is if I were Drunk and could not drive,, and, I would not be driving anyway, so, that solves the Seatbelt problem.. Otherwise,, I'll have my hands on the wheel, and foot ready to hit the Gas or the Break to avoid an accident, and funny enough, the Gas is used just as much as the Brake,,, in the city anyway..
Do what you want to do.. I really could not give a shit.. You will never see me telling someone else "How" to be safe...
Simple solution to that is,, if you are Stupid enough to use a tool and you don't know how to use it safely,, well, Stupid is as Stupid does, and that problem will solve itself anyway..
Oh..BTW.. When I grind or wire wheel with a 4" angle grinder spinning 20k rpm's, weed eaters, etc.? No. I don't use safety glasses.
Why? Because, I know how to use the tool, and I know if I screw up, to squint my eyes for a second.
Used to have an old welder who worked with me. Always getting shit in his eyes.. Always telling me I should wear some.. I finally said after a few years.. How many times have you had to stop because I got something in my eye? He said.. Never. Ok,, how many times have I had to stop and help you because, you got shit in yours? This Really Dumb Look came over his face. Not sure why it didn't hit him the 4th or 5th time I had to help him, and I work 2x as fast as he does, but, it finally hit him..
He asked me why? I said. Have I ever thrown wire at you working around me in the shop? He said No.. I said, well you throw wire at me just about every time you fire up the wire wheel.. Know what the difference is? I pay attention, you don't because, you think your safety glasses protect you,, even though proof says they don't.. Me, on the other hand, I don't throw wires at you, nor do I throw them when I am going to have them bounce back at me..
His reply was something like yours would be.. BUT, you never know when something is going to fly up and hit you in the eye.. To which I reply.. How many times have I had and have you had shit in the eyes??
Then, I paused and said,, Next Question??
It is,, really that simple.. When you get something in your eye, when wearing safety glasses, you think it is a fluke...
Me.. I know it is because, someone fired up a tool and started spraying me, something popped me in the cheek, bounced off, hit the glasses AND THEN,, went into my eye...
I can grind all day long and not get a smut face.. My old buddy.. Half a day and he had a smut face. I used to say,, Not trying to jinx you buddy, but, from the looks of your face,, you have been sitting at the slot machine for quite a while now, you are sure to hit the jackpot if you don't start paying attention to where you are throwing your hots.. It was always just a matter of time.. Especially if he was working in a corner or something..
If you have it, you have it. If you don't, you don't..
BTW.. Ready for WWIII? Got your Food, Water and Weapons and Ammo Ready? This Igmo they "Selected" in 2020 is about to get us in a War.. Turkey is calling his bluff.. Wonder if he will even make it to Israel.. Obama was just in Italy. They had a 3 tiered clearance team out in front of him.. People are figuring this shit all out.. About time for the Woke to Wake up!! Ha..ha.. Go back to sleep.. It's safer in Bed.. And, that is A FACT!! Uh Oh!! I hope I didn't ruin your Week!!
So what???
🤣🤣
Название....бред ! Даже смотреть не буду !!!
You spent hours making a 2 dollar broom handle. Have you ever thought of fishing or golf?
Никаких проблем занимаетесь играйте в гольф. А указывать кому что делать,тем более ( Вы зашли к автору на канал.) Это мягко говоря не уважние.
Applying torque on one axis against torque on the other is incredibly stupid. Few machines are even designed to work in this way. I’m saying this not for your sake. Putting content like this out there without warning viewers of the danger and forces at work is a problem because you will likely be the reason someone loses fingers or gets hurt.
Cool trick, but be upfront about the dangers involved.
나무를 구멍에 넣으면 톱날의 압력때문에
구멍틀이 위로 뜨려고 할텐데 그걸 어떻게 테이블 쏘 바닥에 고정시켰는지 그게 안나오네? 제일 중요한 부분인데~^^
^^ 그 장치도 있습니다.
too complicatet for me...😮
Карандаши точить...😂
nothing like using a power tool in a dangerous manner for which it was not designed or engineered...good luck
😂