☠Site Safety Instructions shown at the start of video were not practiced at all. Workers didn't even have covered shoes, let alone safety boots, they were working on elevated surfaces above six feet without any fall protection, lifting sharp edged stones without gloves, and many more flagrant safety violations are clearly visible.
Anchor bolts installation before fixing the shutter of the concrete beam is not the best practice, sorry to tell, as the steel template will tend to move even slightly during concrete casting. Also, before wall cladding panels erection, columns plumbing and alignment along with connection bolts tension should be checked to apply high compressive grouting under column bases. This is a must for proper safe erection procedure.
I think you're right about that. Also I don't understand why they have to do grouting after columns are already seated in their positions...is it good practice?
still think the ground could have been delt with first prior to construction in a bid to do away with the disturbance that a vibratory roller would cause
1) No water proofing on Columns before back filling. 2) Extra reinforcement bars perhaps missed for Columns were put from top. Wrong practice. 3) No manlift used while installation. Unsafe practice.
Thanks for finding those things and that's our moto to show the work as it is what they are doing in site then people will get know about reality what is happening and what is needed.
Can I ask one question? You must have good knowledge about this. I want to know if installing a crane provision is profitable in 2024 or not? What I mean is, is there anything more profitable that we can implement in an industrial warehouse today or should we go with crane provision? I have another question: Is it more profitable today to install a crane provision with my own money, or should I rent it out to someone else and invest the money elsewhere?
Im starting a new job soon as a QS do u have any tips when costing for a warehouse etc as the company mainly focuses on building warehouses etc. thank you
Thanks. But how much is the estimated cost for this type of warehouse? I am thinking of bulding one in my property but have no idea whatsoever. Can you give an an estimate or range of cost in dollars? Thanks nce again.
we are steel structure warehouse factory ,if you want to build ,welcome you contact me, my whatsapp / wechat： 8617332951927 or send to my email nancy@zhaohongsteel.com
@@nancylee2937 , Hi I am from Hyderabad .may I know where's ur office. ? I am Architect by profession and need to plan a WareHouse on 50000.Sft. in Hyderabad. Need a structural engineer and executer for the same. I haven't yet received the details of the project .My WhatsApp number -9010543309
@@viplavrakhewar9538 We feel honoured to introduce ourselves cladding Projects Private Limited, an engineering and project management contracting firm engaged in the execution of MEP, Civil & Structural services for Industrial Plants. We have detail design capacity to prepare shop drawings and As-Built drawings. The Core competences are project management skills enabling us to control quality and time management with commitment levels to customer delight. Cladding Projects is present Pan India & Overseas with has more than 50 satisfied clients. We are specialized in the field of: Oil and Gas FMCG Textiles Food Grains & Cold Storage Logistics & Warehousing Power and Telecom Heavy Industries Cement Plant Airports & Railways Thank you for your attention and look forward to have a professional association for long term relationship & mutual benefit for both of us. Kindly give us an opportunity so that we may serve you with of all our services and efforts. Kindly refer the attached profile and you can also refer our website for more details & services which is www.cspl.org We are happy to serve you! Regards, Yugal Madan Senior Executive - Marketing & Sales CLADDING PROJECTS PVT LTD ISO 9001 : 2015 CERTIFIED CO. p +91-124-4308897 m +91-9716415133 a 717 Unitech Arcadia, South City - II, Gurugram (Gurgaon), Haryana-122001 Email : se_jaipur@cspl.org
It's not that easy to answer cause design depends on lot of site criterias and ground reality as of now it's a foundations for shed only thanks for your time and concern
To fill the void below the base plate (between finished concrete level and bottom of base plate.. There is always a tolerance (gap) left as it's easier to shim it level than it is to start breaking concrete out.. then that shim is grouted in permanently.
Quanto custa para fazer um galpão 14 m por 25 meu sonho trabalho com fundição não pode levar água é tudo emendado mas Agradeço ao meu Deus é show esse trabalho
Hi,We are professional manufacture of steel building in China about 39 years,If you want know more details please contact me Tel/Whatsapp/Wechat:0086-150-5320-7018 Email:yolanda@lstianjun.com
we are steel structure warehouse factory ,if you want to build ,welcome you contact me, my whatsapp / wechat： 8617332951927 or send to my email nancy@zhaohongsteel.com
Who you are trying to deceive with acting like you give a damn about SAFETY ?? It's clear that the workers are having a miserable working environment. I can imagine them giving you the finger every time you annoy them with your stupid documentary. For the entire operation two guys had safety helmets and no doubt they were forced to wear them.
You state site safety in the begining of the video, yet through out the video most people are wearing FLIP FLOPS!, NO HARD HATS, NO SAFETY GLASSES, NO GLOVES! WHAT A JOKE! HYPOCRITES
instagram.com/civil_tech_constructions/?igshid=8t0b5iyj7ivw
70×100 sft estimate
6000 Sq ft construction estimate please
Contact information
Civiltechconstructions97@gmail.com
Estimate
its first for me pree enginering construstion now we learn easyley on your videos thnks for u much thnks and doing good job for humanty
☠Site Safety Instructions shown at the start of video were not practiced at all. Workers didn't even have covered shoes, let alone safety boots, they were working on elevated surfaces above six feet without any fall protection, lifting sharp edged stones without gloves, and many more flagrant safety violations are clearly visible.
Anchor bolts installation before fixing the shutter of the concrete beam is not the best practice, sorry to tell, as the steel template will tend to move even slightly during concrete casting.
Also, before wall cladding panels erection, columns plumbing and alignment along with connection bolts tension should be checked to apply high compressive grouting under column bases.
This is a must for proper safe erection procedure.
I think you're right about that. Also I don't understand why they have to do grouting after columns are already seated in their positions...is it good practice?
Right, column plumb and alignment are most important in the stage of column erection . Must before rafters erection
still think the ground could have been delt with first prior to construction in a bid to do away with the disturbance that a vibratory roller would cause
1) No water proofing on Columns before back filling.
2) Extra reinforcement bars perhaps missed for Columns were put from top. Wrong practice.
3) No manlift used while installation. Unsafe practice.
No safety shoes, no googles, no ...., no...
Thanks for finding those things and that's our moto to show the work as it is what they are doing in site then people will get know about reality what is happening and what is needed.
Sir, How can I prevent cracks in non-loading partition walls due to deflected steel structural beams' interaction?
Nice shown everything but at last fixing of panel may show in detail close up may helpful....
Good Effort..
Cost & siz not mentioned in video...
Can I ask one question? You must have good knowledge about this. I want to know if installing a crane provision is profitable in 2024 or not? What I mean is, is there anything more profitable that we can implement in an industrial warehouse today or should we go with crane provision? I have another question: Is it more profitable today to install a crane provision with my own money, or should I rent it out to someone else and invest the money elsewhere?
Where you want to build a warehouse depends on the place whether you will make profit or loss there
It's "CLEAT"....not "CLIT" :p :p Anyway good video. Thumbs up.
this was such an interesting video to watch. I was costing a warehouse and had missed out some aspects so thanks for this.
Im starting a new job soon as a QS do u have any tips when costing for a warehouse etc as the company mainly focuses on building warehouses etc. thank you
Thanks. But how much is the estimated cost for this type of warehouse? I am thinking of bulding one in my property but have no idea whatsoever. Can you give an an estimate or range of cost in dollars? Thanks nce again.
Wow I like this construction. Sir which cost per squre feet......
Contact for construction work
Sir I need clear details on the substructure works
Isnt this building foundation strength too much for its purpose?
Israel maybe it depends on What Will be housed
NEVER too much strength when it comes to foundation
Overkill
the music is definitely appropriate
Sir ji base plate ka center kya burji ke center se match karte hai
Can you please tell me what is the estimate cost for the entire process ?
Thank you very much 😊....very useful
What is the material used for walling
Puff panels
I want to do this in Bangladesh how much is possible and how much will cost per square,
we are steel structure warehouse factory ,if you want to build ,welcome you contact me, my whatsapp / wechat： 8617332951927 or send to my email nancy@zhaohongsteel.com
@@nancylee2937 , Hi I am from Hyderabad .may I know where's ur office. ? I am Architect by profession and need to plan a WareHouse on 50000.Sft. in Hyderabad. Need a structural engineer and executer for the same. I haven't yet received the details of the project .My WhatsApp number -9010543309
@@viplavrakhewar9538 We feel honoured to introduce ourselves cladding Projects Private Limited, an engineering and project management contracting firm engaged in the execution of MEP, Civil & Structural services for Industrial Plants. We have detail design capacity to prepare shop drawings and As-Built drawings. The Core competences are project management skills enabling us to control quality and time management with commitment levels to customer delight.
Cladding Projects is present Pan India & Overseas with has more than 50 satisfied clients.
We are specialized in the field of:
Oil and Gas
FMCG
Textiles
Food Grains & Cold Storage
Logistics & Warehousing
Power and Telecom
Heavy Industries
Cement Plant
Airports & Railways
Thank you for your attention and look forward to have a professional association for long term relationship & mutual benefit for both of us.
Kindly give us an opportunity so that we may serve you with of all our services and efforts.
Kindly refer the attached profile and you can also refer our website for more details & services which is www.cspl.org
We are happy to serve you!
Regards,
Yugal Madan
Senior Executive - Marketing & Sales
CLADDING PROJECTS PVT LTD
ISO 9001 : 2015 CERTIFIED CO.
p +91-124-4308897 m +91-9716415133
a 717 Unitech Arcadia, South City - II, Gurugram (Gurgaon), Haryana-122001
Email : se_jaipur@cspl.org
connect me 8770418851
Please conduct workshop on safety first...
I see its projected with Tekla. Highest level. But mounting very low level... where is forklift? Its unsafe climbing on constructions.
Which chemical is used for waterproofing?
Fosroc
Bridge bana rahe ho ya shed ke column ke liye hai ye.
It's not that easy to answer cause design depends on lot of site criterias and ground reality as of now it's a foundations for shed only thanks for your time and concern
I am wondering where are the doors??
What is cost per sft?Do you Design for wind FORCE? Please give explanation
Yes, we considered wind and earthquake also.
9949991953 in tirupati
I want this working team
Hi I want to know for 40 mtrs span and 8 mtr clrear height structure for whare house what is the weight of steel for 1 SFT
Per sft 350/- fabrication & erection
What is the estimated cost for 25000 sft warehouse.
Total land is 32000sft
Per sft 750/- civil,fabrication & erection
hello! why do you use grouting at the foot of the column? 6:17
To fill the void below the base plate (between finished concrete level and bottom of base plate.. There is always a tolerance (gap) left as it's easier to shim it level than it is to start breaking concrete out.. then that shim is grouted in permanently.
In which way I get your's services?
What’s the dimensions of the building.. length breadth n height
Show the process, but the use of Epps is essential
How much cost only erection rate per metric ton
Quanto custa para fazer um galpão 14 m por 25 meu sonho trabalho com fundição não pode levar água é tudo emendado mas Agradeço ao meu Deus é show esse trabalho
Thks sir , whats was the purpose of structure
Egg cold storage
Safety ya right you try and pull that off here in the great usa u dont care about the workers
No water proofing on that foundation?
Grt video i have ever seen
Thank you so much
Zero Quality control !
How much cost for this godown
Good video thanks for upload
What is the dimension of this? I am planning construction of similar structure to be commissioned in March 2020 and my land size is around 5000 sqft..
I have done a similar project like this contact with us for more details
Hi,We are professional manufacture of steel building in China about 39 years,If you want know more details please contact me Tel/Whatsapp/Wechat:0086-150-5320-7018 Email:yolanda@lstianjun.com
How many time to take to build ?
estimated cost to do like this?
How much cost for construct this
Where is that guy in the footing hole safety boots and other ppe
this project filled down just right after finish the columns and beams structute
way too many foundation bolts used
You are wonderful
Thank you ❤
where is water proofing for the columns & footings
You need to revise your erection sequence, it is not safe, for workers as well foundations and columns
Looks like the building will last a couple hundred years.
sir how to apply peb structure licence..... plzzz ..tell me
6000sq ft construction estimate please
Avrege estimates please all over india
Yes i need too for 12000 sq ft .... Factory shed
9949991953
Premium contractor's
Tirupati
connect me 8770418851
@@dheeraj8078 what will be the cost for 5000 sqft ??
What does the big stones called
Boulders
Boulders
Sir is kaam ka with material rate kya chalu hai abhi ke price
125 rupees per sq feet abhi ka rate
@@akashdash329 provide your number please.
Share this shed size
it's complicated company property
Construction cost
How many sq ft godown n wat it's cost 2. Build it
we are steel structure warehouse factory ,if you want to build ,welcome you contact me, my whatsapp / wechat： 8617332951927 or send to my email nancy@zhaohongsteel.com
350 /-per sft fabrication & erection
nice to see
The structure looks over designed 😱
Maybe. But, I'd rather they overdesign than say...underdesign.
Dood digging in feet soil and there’s no cage really poor .
Excellent. ...
what price a 1 peb column
Total steel purchases company
@@civiltechconstructions 10000 sqft Wearhouse total cost
How many cost
Total square feet of this PEB
th-cam.com/video/SezAVO1pJe0/w-d-xo.html
COST ?
Sir what is the total price for this video building
th-cam.com/video/SezAVO1pJe0/w-d-xo.html
Price
Good job
15000 sq ft price?
Bro per sft 350/- all fabrication & erection
@@oshopebbuildings4082 thank you bro
Linked ka kya rate lete ho aap 50% yeah 75% percent
Muy buen video lastima de música fea
the project lacked quality control.
Good
Who you are trying to deceive with acting like you give a damn about SAFETY ??
It's clear that the workers are having a miserable working environment. I can imagine them giving you the finger every time you annoy them with your stupid documentary.
For the entire operation two guys had safety helmets and no doubt they were forced to wear them.
Square foot. Amount ???
125 rupees sq feet
It is ok 👍
+aPublicComment...
You state site safety in the begining of the video, yet through out the video most people are wearing FLIP FLOPS!, NO HARD HATS, NO SAFETY GLASSES, NO GLOVES! WHAT A JOKE! HYPOCRITES
We appreciate your concern few works are happening like that so we kept that note at the beginning i hope you will understand that thank you.
#accesstoenergy
❤
no roffing
Good job
Nice