Do You Like Lathe Works? Watch This Video ✔

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 พ.ย. 2021
  • All Project Videos:
    - Part 1 Pulley: • Making A Pulley On Lat...
    - Part 1 Pulley no music version: • Make It Extreme? I Do ...
    - Part 2 Threaded Cone: • Do You Like Lathe Work...
    - Part 2 Threaded Cone no music version: • Tornitura Cono Filetta...
    - Part 3 Motor Pulley: • I'll Do It Like This, ...
    - Part 4 Rotating Shaft: • Prende Forma! Tornitur...
    - Part 4 Rotating Shaft no music version: • Come Tornire E Fresare...
    - Part 5 Bearing Roller: • Accetta Il Consiglio! ...
    - Part 6 Roller Shaft: • Tornitura Albero Cusci...
    - Part 7 The Test: • How To Make A Log Spli...
    Contatto Diretto: xhanejciccio@gmail.com
    Instagram: / vilson_alba
    Secondo Canale: / @vilsonx
    Sito Ufficiale Banggood: bit.ly/2V6f9Ea
    ▪ La Mia Attrezzatura:
    Tornitura
    - Visualizzatore Di Quote: bit.ly/3cTgCU2
    - Set Utensili CNMG: ban.ggood.vip/8hmd
    - Inserti CNMG Acciaio: bit.ly/3f1Sqke
    - Inserti CNMG Alluminio: ban.ggood.vip/8hmh
    - Set Utensili 12x12 mm: bit.ly/2IHigNV
    - Set utensili 16x16 mm: bit.ly/3cTVOLW
    - Set Utensili TCMT16: bit.ly/2Lg529N
    - Inserti TCMT16T304: bit.ly/3f8JDgz
    - Comparatore: bit.ly/37Fj0L5
    - Base magnetica: ban.ggood.vip/ax4a
    - Torretta A Cambio Rapido 12x12: bit.ly/2L2QEQ5
    - Cartella 12x12: ban.ggood.vip/ax4c
    - Torretta A Cambio Rapido 16x16: bit.ly/3d55e7L
    - Cartella 16x16: bit.ly/2W87dkO
    - Sbavatore: goo.gl/YUBWXg
    - Mandr3ino 160mm : bit.ly/2x9jNXL
    - Utensile D16: bit.ly/2MSrrcC
    - Set Punte Hss: bit.ly/33YaEOo
    - Set Punte Grandi Hss: bit.ly/2YzaatB
    - Set Micrometri: bit.ly/2IWVkYe
    - Calibro: bit.ly/2XKOBdd
    - Centrini: bit.ly/2w2Ewg5
    - Contropunta Rotante: bit.ly/39yQueS
    - Godrone: bit.ly/3aLuo9S
    Fresatura
    - Kit Staffaggio: bit.ly/2xmMFww
    - Fresa D10: ban.ggood.vip/ax1h
    - Fresa D8: ban.ggood.vip/ax1k
    - Mandrino B16: bit.ly/2JcJUSN
    - Set Maschi: bit.ly/30aDaKe
    - Piastre Calibrate: bit.ly/2yX7m2E
    Officina
    - Smerigliatrice A Batteria: bit.ly/2KOAf3r
    - Trapano Avvitatore: bit.ly/3aWAJiU
    - Estrattore Cuscinetti: bit.ly/2KOzuYl
    - Calibro Per Segnare: bit.ly/3f614OE
    - Grani: bit.ly/2YkUFcA
    - Fascette: bit.ly/3aOVYD1
    - Saldatrice: bit.ly/3tDLWOO
    - Maschera Per Saldare: bit.ly/2KOAvzD
    - Triangolo Magnetico Saldare: bit.ly/3f6ZaNx
    - Set Chiavi A Bussola: bit.ly/2ZFNgod
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 185

  • @TheKrisg50
    @TheKrisg50 2 ปีที่แล้ว +9

    Using the drill motor that way is very clever. I think I’ll make something for my lathe. Well done.

  • @casualcustoms5536
    @casualcustoms5536 2 ปีที่แล้ว +5

    Very nice work. refreshing to see someone that has manual machine skills.

  • @CruiserMac
    @CruiserMac 2 ปีที่แล้ว +4

    That is a great idea making a drill chuck for the tool post! Perfect way to drill those off set holes.

  • @jameswatters9592
    @jameswatters9592 2 ปีที่แล้ว +4

    some unusual attatchments, never seen some of those jobs done on a lathe before, very inventive

  • @everlast2658
    @everlast2658 9 หลายเดือนก่อน

    Built in taper capability or an attachment or technique. Brilliant

  • @__austrianoldboy_9861
    @__austrianoldboy_9861 ปีที่แล้ว

    Nice work, thank you for sharing!

  • @dumontsantos6197
    @dumontsantos6197 2 ปีที่แล้ว +3

    Belo trabalho, muito eficiente, parabéns e abraços!

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว +1

      grazie mille :)

  • @marbike21
    @marbike21 2 ปีที่แล้ว

    Bello ,in questa realizzazione ti eri veramente superato!! BRAVO VILSON !

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      grazie mille Marco :)

  • @VERTEXVIETNAM2018
    @VERTEXVIETNAM2018 2 ปีที่แล้ว +1

    Great video. Thanks for sharing. Good job

  • @scroungasworkshop4663
    @scroungasworkshop4663 2 ปีที่แล้ว +14

    Awesome machining work. You made it look so simple. Cheers Stuart 🇦🇺

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      grazie mille :)

    • @Militarycollector
      @Militarycollector 2 ปีที่แล้ว

      Not bad considering I don’t have a clue what it is or what he said

  • @SimonEGab
    @SimonEGab 2 ปีที่แล้ว

    Bravo Vilson 👏🏻👏🏻👏🏻

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      grazie mille Simone :)

  • @moobaz8675
    @moobaz8675 2 ปีที่แล้ว +1

    Cool. That was very skilled. I like the drill attachments.

  • @russguppy8761
    @russguppy8761 2 ปีที่แล้ว +1

    Very interesting.
    Key ways
    Drilling.
    I like it.

  • @tihzho
    @tihzho 2 ปีที่แล้ว +4

    Yes NO MUSIC versions are great!

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว +1

      ok, la versione senza musica è disponibile, guarda sul mio canale

    • @DanKoning777
      @DanKoning777 2 ปีที่แล้ว +1

      Agreed; I skipped ahead to see if the music stopped b/c I want to hear the lathe not music.
      I ended up moving on to a different video after a few minutes.

  • @samantamusaragno1934
    @samantamusaragno1934 2 ปีที่แล้ว +2

    Ottimo lavoro vil 😘❤❤❤❤❤

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      grazie mille Terry 😀

  • @penguins9645
    @penguins9645 2 ปีที่แล้ว +3

    That was fascinating to watch, but I have no idea what you just made. Still watched the whole thing though!

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      grazie mille :)
      questo è un cono spaccalegna e puoi vedere tutti i video del progetto in descrizione... molto presto arriverà anche il video finale

    • @rudyrayaaw5138
      @rudyrayaaw5138 2 ปีที่แล้ว +1

      It looks like a log splitter to me. It's driven by a engine or motor at a fairly low speed, as it's turning you jam the center of a log into it and it threads itself into the log like a lag bolt, as it goes deeper the "lag bolt" gets wider and wider splitting the log into 2 or 3 pieces. the other thing needed is a way to keep the log from spinning with it which is not difficult.

  • @mariocora2451
    @mariocora2451 10 หลายเดือนก่อน

    Sempre bravissimo.

  • @TrPrecisionMachining
    @TrPrecisionMachining 2 ปีที่แล้ว

    good job vilson

  • @CirebonMhi-lh3lu
    @CirebonMhi-lh3lu 9 หลายเดือนก่อน

    Machine use 1 phase or three phase ..?

  • @juwiediuall7456
    @juwiediuall7456 ปีที่แล้ว

    Sorry - good job😉

  • @fasteddie4107
    @fasteddie4107 2 ปีที่แล้ว

    Great workmanship. Molto benne! Thank you for sharing this. How does it get used?

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว +1

      grazie :) è un cono spaccalegna, puoi vedere i video del progetto in descrizione a questo video... tra non molto l'attrezzo sarà completo

  • @user-yo9vm1lg2f
    @user-yo9vm1lg2f 6 หลายเดือนก่อน +1

    La lubrification est en option

  • @davidegorini8882
    @davidegorini8882 2 ปีที่แล้ว

    Bravo,davvero interessante

  • @PaddySheeper
    @PaddySheeper 2 ปีที่แล้ว

    Nice 👍🏻

  • @altered148fiat
    @altered148fiat 2 ปีที่แล้ว

    nice work

  • @lemin91
    @lemin91 ปีที่แล้ว

    ciao Vilson e complimenti per le tue capacità e per il modo in cui spieghi, ti volevo chiedere se fai lavori su richiesta di pulegge?

  • @inakitxiki7528
    @inakitxiki7528 2 ปีที่แล้ว

    Tienes planos de como hicistes el taladro en el portaherramientas?

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      ciao :)
      no, niente progetto per il mandrino che uso per forare sul tornio... ho solo fatto un video: th-cam.com/video/NnV2Wf9-3T0/w-d-xo.html

  • @salvatoreromeo3531
    @salvatoreromeo3531 2 ปีที่แล้ว +1

    Ciao Vilson, complimenti ancora; se ho visto e capito bene, hai ottenuto la conicità con l'avanzamento automatico longitudinale, ma quello trasversale lo hai realizzato manualmente con la mano sinistra.
    Probabilmente non hai utilizzato il carrellino superiore ad angolo regolabile perché la corsa non ti bastava per tutta la lunghezza del cono.
    Ma sei riuscito a realizzare quella conicità pressoché perfetta soltanto con la sensibilità e la precisione del movimento della mano sinistra?
    Grazie e a presto.

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      ciao :)
      la conicità l'ho fatta con il carro inclinabile in due colpi mentre la filettatura l'ho fatta come hai descritto tu...

  • @vidaxhanej8432
    @vidaxhanej8432 2 ปีที่แล้ว +1

    Benissimo video Vilson

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      grazie mille Vida 😀

  • @philipblackmore6028
    @philipblackmore6028 2 ปีที่แล้ว

    From where, do guys like this come. Awesome.

  • @nando4427
    @nando4427 2 ปีที่แล้ว

    Top👏

  • @minhthehonda7690
    @minhthehonda7690 2 ปีที่แล้ว

    bạn rất giỏi !

  • @juwiediuall7456
    @juwiediuall7456 ปีที่แล้ว

    Golf job

  • @candyop391
    @candyop391 2 ปีที่แล้ว

    Good

  • @markgoddard2560
    @markgoddard2560 2 ปีที่แล้ว +1

    Interesting. I wonder what he was making!

    • @zahirmurji
      @zahirmurji 2 ปีที่แล้ว

      I was wondering too.

    • @johnlockesghost5592
      @johnlockesghost5592 2 ปีที่แล้ว +2

      my guess is wood splitter

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      ciao :) è un cono spaccalegna e potete trovare tutti i video del progetto in descrizione... molto presto arriverà anche il video finale :)

    • @amdidextrous
      @amdidextrous 2 ปีที่แล้ว

      @@VilsonAlba There you go, now we all know....

    • @amdidextrous
      @amdidextrous 2 ปีที่แล้ว +1

      @@johnlockesghost5592 Why would you make a wood splitter in brass?

  • @hmorse78
    @hmorse78 2 ปีที่แล้ว

    Were you using ceramic tips? If not why no coolant?

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      ciao :)
      no, niente punte in ceramica ma in metallo duro... non uso il refrigerante per non sporcare la telecamera

    • @hmorse78
      @hmorse78 2 ปีที่แล้ว +1

      @@VilsonAlba Ahh ok. The tips stood up well considering. Great thread work 👍🏻

  • @mocciaantonio1508
    @mocciaantonio1508 2 ปีที่แล้ว

    Grande vilson io ti ho copiato e ho usato lo stesso metodo per farmi una vite come quella, in gnb2 , bisogna essere molto attenti perché sulla punta se spingi ti strappa di brutto le creste del filetto. Sicuramente non è ben fatta come la tua ma il suo lavoro lo fa egregiamente. Grazie!

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      grazie :)
      se fa il suo lavoro allora è fatto bene :)

  • @jbmj
    @jbmj 2 ปีที่แล้ว

    How to choose best tool bit? please help. thanks

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว +1

      dipende da che materiale devi lavorare, per ogni materiale c'è un modello d'inserto dedicato

  • @user-jm4nh7um9b
    @user-jm4nh7um9b 2 ปีที่แล้ว

    Морковка 👍

  • @k13ehr
    @k13ehr 2 ปีที่แล้ว

    Buffing wheel arbor or log splitter, which?

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      spaccalegna :)
      puoi trovare tutti i video del progetto in descrizione! purtroppo non è ancora completato il progetto ma manca poco

    • @k13ehr
      @k13ehr 2 ปีที่แล้ว

      @@VilsonAlba I am sorry but I do not understand that.

  • @apistosig4173
    @apistosig4173 2 ปีที่แล้ว

    Bellisimo

  • @subramaniamchandrasekar1397
    @subramaniamchandrasekar1397 2 ปีที่แล้ว +1

    Must be an attachment for a giant buffing wheel with a 30 HP motor shaft

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      no, è un cono spaccalegna, puoi vedere tutti i video del progetto nei link in descrizione

    • @paulsmith2105
      @paulsmith2105 2 ปีที่แล้ว

      I think its a log spitter

    • @paulsmith2105
      @paulsmith2105 2 ปีที่แล้ว

      I think its a log splitter

  • @raymondmiddleton308
    @raymondmiddleton308 2 ปีที่แล้ว

    Is it a wood splitter

  • @hmmumm2164
    @hmmumm2164 2 ปีที่แล้ว

    How much hp motor is used in your lathe 3 hp??

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      si, ho un 3 HP (2.2 KW)

  • @robfrancis8830
    @robfrancis8830 2 ปีที่แล้ว

    Did he turned that manually?

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      si, manualmente come si vede nel video :)

  • @eugeniopizzorni
    @eugeniopizzorni 2 ปีที่แล้ว

    Complimenti e Buongiorno Vilson. Ottimo lavoro MAESTRO 🤗🤗🤗🤗🤗🙋🏻‍♂️🙋🏻‍♂️🙋🏻‍♂️🙋🏻‍♂️🙋🏻‍♂️

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      grazie mille, troppo buono :)

  • @mariocora2451
    @mariocora2451 2 ปีที่แล้ว

    Indubbiamente sai lavorare al tornio con bravura e maestria.

  • @muzixman2011
    @muzixman2011 2 ปีที่แล้ว

    how accurate are these manual lathes?

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      0.005 mm

    • @muzixman2011
      @muzixman2011 2 ปีที่แล้ว

      @@VilsonAlba really? if manual lathes are as accurate as CNC why we need CNC?

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว +2

      @@muzixman2011 i cnc hanno una potenza di produzione molto superiore. se devi fare 1 pezzo puoi usare il tornio manuale ma se devi fare 100 pezzi, meglio usare un cnc per fare presto

  • @ldnwholesale8552
    @ldnwholesale8552 2 ปีที่แล้ว +2

    I cut keyways like that at school 50+ years ago. Made a male one as well to join to pieces of bar together

  • @flhusa1
    @flhusa1 2 ปีที่แล้ว

    Be nice to make a black powder signal cannon out of a piece of round stock like that .

  • @maiknakas
    @maiknakas 2 ปีที่แล้ว

    Time 0.34 Can you please give me the tool Indexable Carbide Lathe code at the time of the video 2,41 And Inserts thanks !

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      ciao :)
      per gli inserti che consiglio, link in descrizione

    • @maiknakas
      @maiknakas 2 ปีที่แล้ว

      @@VilsonAlba Sì amico mio ma voglio solo questo specifico nel tempo che ti ho mostrato gli altri ma non sono interessato grazie mille>

  • @mauroclemente2469
    @mauroclemente2469 9 หลายเดือนก่อน

    Vorrei vedere la lavorazione di ingranaggi a V filmati grazie.

  • @ChimeraActual
    @ChimeraActual 2 ปีที่แล้ว +2

    OK, what am I missing? No way you can run that cross slide in manually and maintain depth of cut -- is there?
    Clever, you turned a battery operated drill into an old fashioned corded drill, way to save on those expensive batteries.
    Great concentricity with that three jaw chuck!

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      grazie mille :)
      la lavorazione è tutta manuale :)

    • @daveat191
      @daveat191 2 ปีที่แล้ว +1

      Looked like a manual in feed on the taper to me too. Never ever saw an engine lathe with a geared taper.

    • @ChimeraActual
      @ChimeraActual 2 ปีที่แล้ว +2

      @@daveat191 Some Monarchs have that, but it's really rare.
      Hats off to him for his control.

  • @jablon1500
    @jablon1500 2 ปีที่แล้ว

    How this is even possibile?!

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      è possibile si :)

  • @Nobilangelo
    @Nobilangelo 2 ปีที่แล้ว

    This video begins in a very boring way but then it makes its point in a roundabout way. 😉

  • @zahirmurji
    @zahirmurji 2 ปีที่แล้ว

    What did he make?

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      è un cono spaccalegna. per vedere tutti i video del progetto, vai in descrizione al video che ci sono tutti i link

  • @user-uu5ll1xl2f
    @user-uu5ll1xl2f 2 ปีที่แล้ว

    👍

  • @mrafard
    @mrafard 2 ปีที่แล้ว

    grazi ragazza

  • @thebrizzell
    @thebrizzell 2 ปีที่แล้ว

    Oh hell.. What is it already

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      è un cono spaccalegna, puoi vedere il progetto intero nei link che trovi in descrizione

  • @einars899
    @einars899 2 ปีที่แล้ว +1

    With the part mounted in the chuck like that, max RPM is very close to zero!!! This is not safe at all.

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      infatti sulla punta è un problema ma con un po' di pazienza, si fa

  • @giacomoorru3420
    @giacomoorru3420 2 ปีที่แล้ว

    Ciao vilson ottima idea lo spaccalegna. Ascolta che ne pensi dei torni zanoletti, una marca tutta italiana. Sono buoni torni?

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว +1

      ne ho sentito parlare molto ma molto bene

  • @pickin4you
    @pickin4you 2 ปีที่แล้ว

    Sorry, but what was it?

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      è un cono spaccalegna, puoi vedere tutti i video del progetto grazie a link che trovi in descrizione

  • @danshepler9933
    @danshepler9933 2 ปีที่แล้ว +1

    A wood splitter

    • @greavous93
      @greavous93 2 ปีที่แล้ว

      that would be my guess too. Now I want pizza.

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      ciao ragazzi :) in descrizione trovate tutti i video del progetto che sto facendo

  • @altered148fiat
    @altered148fiat 2 ปีที่แล้ว

    I turned music off the sound of the machine would have been spot on.

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว +1

      ciao :) in descrizione trovi anche il video senza musica con il suono del tornio

  • @tantraraasa914
    @tantraraasa914 2 ปีที่แล้ว

    Wondering what were you trying to teach. Isn't it a waste of material and time.

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      ciao :) non è uno spreco di materiale e di tempo perchè il prodotto funziona... se vuoi in descrizione ci sono tutti i video di questo progetto

  • @MrMondaniels
    @MrMondaniels 2 ปีที่แล้ว

    👉👍

  • @mr2spyderchronicles287
    @mr2spyderchronicles287 2 ปีที่แล้ว

    How the hell do you cut a tapered thread? Are you feeding by hand as the screw is cutting?

    • @jayjackson597
      @jayjackson597 2 ปีที่แล้ว +1

      I thought the same thing, he must have a taper attachment, no, he's just that good! amazing!

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      tutto manuale :)

    • @mr2spyderchronicles287
      @mr2spyderchronicles287 2 ปีที่แล้ว

      @@VilsonAlba mama mia!

  • @KW-ei3pi
    @KW-ei3pi 2 ปีที่แล้ว

    Very nice work, but please stop the music. I don't think anyone like music in machining videos. Just machine noise would be better. Thanks

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      se guardi in descrizione c'è anche questo video ma senza musica :)

  • @lionelbousfield5659
    @lionelbousfield5659 2 ปีที่แล้ว

    Made an awful lot of brass filings !

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      non è ottone ma ferro

  • @clist9406
    @clist9406 2 ปีที่แล้ว

    That’s going to hurt when you sit on it

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      non mi devo sedere sopra :)

  • @DrHarryT
    @DrHarryT 2 ปีที่แล้ว

    The title and everything else is in English and then I get to 7:30 to find out it is in Italian with no English subtitles.
    This is not right.
    [Another commenter did not know what it is and I agree since there is no indication and I can't understand the talking to see if it is revealed.
    I however did speculate thinking it would work rotating on a shaft as a wood grabber or splitter.
    Thanks anyway.

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      ciao :) puoi attivare i sottotitoli in questo modo: th-cam.com/video/CGmbMIDr47w/w-d-xo.html

    • @DrHarryT
      @DrHarryT 2 ปีที่แล้ว

      @@VilsonAlba It works but the auto-translation is very bad and broken English. It would be better if you could add your own translation that has clear proper English.
      Otherwise, put the title in Italian and avoid Western audiences. [Australian, British/English and American/Canadian]

  • @ettoredicarlo1679
    @ettoredicarlo1679 2 ปีที่แล้ว +1

    Ottima manualita’ Vilson , complimenti. Pero sono un po’ perplesso quando ti vedo prendere i pezzi all’inizio lavoro senza supporto ..... o contropunta visto che sporgono dal mandrino in lunghezza piu di 3 volte il diametro del pezzo stesso........alquanto pericoloso direi.
    Bel lavoro comunque.

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว +1

      grazie :)
      no, ti assicuro che non è pericolosa quella sporgenza, il pezzo è massiccio e tiene benissimo. Sarebbe stato pericoloso se il diametro del pezzo fosse stato 30 mm o meno...

  • @SoupyOatmeal
    @SoupyOatmeal 2 ปีที่แล้ว

    Another GD 1920 no talkey video. Oh by the way the music was to loud.

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      ok, la versione no musica è disponibile sul mio canale :)

  • @gideonamir9702
    @gideonamir9702 2 ปีที่แล้ว

    опять белов дрова колоть собрался

  • @tracylemme1375
    @tracylemme1375 2 ปีที่แล้ว +3

    seeing the chuck key in the socket of the chuck without your hand on it just scares the crap out of me. ALWAYS take it out. WHENEVER IT IS IN THE CHUCK YOUR HAND MUST BE ON IT. I have seen serious injuries caused by the spindle starting wit the chuck key in the chuck

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      ciao :) grazie per il suggerimento, purtroppo per fare le riprese video ho bisogno di lasciare la chiave dentro

    • @marbleman52
      @marbleman52 2 ปีที่แล้ว

      Tracy Lemme...Yes, I agree. I operated a manual metal cutting lathe for almost 20 years and that is how I taught myself. I wasn't "perfect" about it but darn near "perfect". My chuck key's home was on top of the lathe, above the motor and pulley housing. If it wasn't there, it was in my hands opening or closing the spindle. In my 20 years, I must have opened & closed the spindle jaws hundreds of thousands of times. I did a lot of mass production of parts and I will confess that when it would take less than 10 seconds to open the spindle, take out the part and put another part in and tighten the jaws, and I had many hundreds of the same part to do, that I would sometimes just leave the chuck in the jaw. I knew that doing that was not the safest thing to do, but I did it anyway.
      And once...just once...I got distracted and forgot to take the chuck key out of the jaw and pushed the on button. The key slammed onto the floor and went sliding across the shop floor. That really scared me. Thankfully, I was not standing in the path or I would have been really hurt. No one else was in that part of the shop so that was a huge relief. I think that from then on, whenever I opened the jaws, I took the few extra seconds to take the key out and put it on it's home spot, even though in just a few more seconds I would be reaching for the key to tighten the jaws.
      Yep, just like you said, Tracy...my chuck key was supposed to be either in my hands or at home spot.

  • @ericstark7639
    @ericstark7639 2 ปีที่แล้ว

    If you put the piece in a 4 jaw you wouldn't have to take such small cuts. Take your apron off honey haha.

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      non ho il grembiule hahahha

  • @rbvenice
    @rbvenice 2 ปีที่แล้ว

    Nooo, la musichetta nooo...

  • @MAsWorld1
    @MAsWorld1 2 ปีที่แล้ว

    What the hell is it 🤷🏻‍♂️

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      è un cono spaccalegna, puoi vedere i video del progetto con i link in descrizione

  • @ajduckapadina219
    @ajduckapadina219 2 ปีที่แล้ว

    Eeejjj beee vilsone nista to ne valja

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      :) I love Cratia :)

  • @furburger9782
    @furburger9782 2 ปีที่แล้ว

    I don't understand a damn word you're sayin
    ..!..😁..!..

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      attiva i sottotitoli: th-cam.com/video/CGmbMIDr47w/w-d-xo.html

  • @FairladyS130
    @FairladyS130 2 ปีที่แล้ว

    Enough of the 'music', lathe sound too hard to do?

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      mi piace la musica :)

  • @mikemraz8569
    @mikemraz8569 2 ปีที่แล้ว

    What a waste of time and material

  • @paulcostello9778
    @paulcostello9778 2 ปีที่แล้ว

    Cool video, terrible music.

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      i like the music

  • @robertbutler8004
    @robertbutler8004 2 ปีที่แล้ว

    All I seen was a huge waste of metal.

  • @davidrule1335
    @davidrule1335 2 ปีที่แล้ว

    pretty gay music.

    • @VilsonAlba
      @VilsonAlba  2 ปีที่แล้ว

      non vedo il problema :)