@@GBWM_CNC Thanks for your best time to watch my handy work, I will try my best but can't promise because now I'm stuck with my main work for support my TH-cam channel seems too slow so have to support my family, especially my kids to school. In the old times, my work was good so I got some supplies and pay tools for my TH-cam channel. I'm thinking I should leave it or keep continue, if continue might slow project. I have income very little not enough to pay back materials and cost over expensive. Otherwise I have to finish homemade lathe first. I do need some gears for tracking carriage. Thanks again
@@GBWM_CNC thank you, my friend, They are very important to help my young kids. I do love it every I did not from school is from my talent just watch on social media. Thanks share
O senhor é muito abilidoso, poderia construir uma fresadora caseira.. Gostaríamos muito de ver uma máquina dessa construída pelas suas mãos! Tudo oque o senhor faz fica ótimo.
Thanks my dear friend for your best time to watch my video. I will try my best and thanks for your suggestions want it CNC machine that is under my project too but for now, I haven’t finished my handy lathe yet because I'm stuck looking for gears for the south bend I exactly do need these gears, if I can make these it means I can make threads or bolts and nuts. I found this gear on Amazon but don't know how can pay or shipping here. That's my problem.
Thanks my dear friend for your best time to watch my video. I will try my best and thanks for your suggestions want it CNC machine that is under my project too but for now, I haven’t finished my handy lathe yet because I'm stuck looking for gears for the south bend I exactly do need these gears, if I can make these it means I can make threads or bolts and nuts. I found this gear on Amazon but don't know how can pay or shipping here. That's my problem. I have seen your video too How are you doing?
Thanks my dear friend for your best time to watch my video. I will try my best and thanks for your suggestions want it CNC machine that is under my project too but for now, I haven’t finished my handy lathe yet because I'm stuck looking for gears for the south bend I exactly do need these gears, if I can make these it means I can make threads or bolts and nuts. I found this gear on Amazon but don't know how can pay or shipping here. That's my problem.
@@servitec-g8e thanks for your comments. By the way Is not perfect for all but I had done some machines because this. So I have to thanks this drill press
Thank you Stereo I will try my best, I can see something went wrong between the spindle and pulley, not fick together when I do test 16mm drill bid on thick metal so I to update key way on spindle and pulley.
@@DanielMeneses-1999 Thanks, Mr.Daniel for your best time to watch my handy work, I will try my best but can't promise because now I'm stuck with my main work for support my TH-cam channel seems too slow so have to support my family, especially my kids to school. In the old times, my work was good so I got some supplies and pay tools for my TH-cam channel. I'm thinking I should leave it or keep continue, if continue might slow project. I have income very little not enough to pay back materials and cost over expensive. Otherwise I have to finish homemade lathe first. I do need some gears for tracking carriage. Thanks again
I love your all builds im inspired too you to build my own lathe and drill press but the tools is very expensive it takes a lot of saving to build Diy machine😊@@mr.ranyhomemade2466
Cool video!
@@GBWM_CNC
Thanks for your best time to watch my handy work, I will try my best but can't promise because now I'm stuck with my main work for support my TH-cam channel seems too slow so have to support my family, especially my kids to school. In the old times, my work was good so I got some supplies and pay tools for my TH-cam channel. I'm thinking I should leave it or keep continue, if continue might slow project. I have income very little not enough to pay back materials and cost over expensive. Otherwise I have to finish homemade lathe first. I do need some gears for tracking carriage.
Thanks again
@@mr.ranyhomemade2466 take your time. Familiy is most important. But it's very important to do what you love to do :)
@@GBWM_CNC thank you, my friend,
They are very important to help my young kids. I do love it every I did not from school is from my talent just watch on social media.
Thanks share
Nice showing
Thanks brother
O senhor é muito abilidoso, poderia construir uma fresadora caseira..
Gostaríamos muito de ver uma máquina dessa construída pelas suas mãos!
Tudo oque o senhor faz fica ótimo.
Thanks my dear friend for your best time to watch my video. I will try my best and thanks for your suggestions want it CNC machine that is under my project too but for now, I haven’t finished my handy lathe yet because I'm stuck looking for gears for the south bend I exactly do need these gears, if I can make these it means I can make threads or bolts and nuts. I found this gear on Amazon but don't know how can pay or shipping here.
That's my problem.
Olá meu amigo a ateração do projeto ficou Top de mais assim vai ter maior variedadae de rpm,bom de mais!!!
Abraço e boa sorte sempre!!!
Thanks my dear friend for your best time to watch my video. I will try my best and thanks for your suggestions want it CNC machine that is under my project too but for now, I haven’t finished my handy lathe yet because I'm stuck looking for gears for the south bend I exactly do need these gears, if I can make these it means I can make threads or bolts and nuts. I found this gear on Amazon but don't know how can pay or shipping here.
That's my problem.
I have seen your video too
How are you doing?
Gostei de sua maquina caseira, para bens muito legal.
Thanks my dear friend for your best time to watch my video. I will try my best and thanks for your suggestions want it CNC machine that is under my project too but for now, I haven’t finished my handy lathe yet because I'm stuck looking for gears for the south bend I exactly do need these gears, if I can make these it means I can make threads or bolts and nuts. I found this gear on Amazon but don't know how can pay or shipping here.
That's my problem.
thank you very good
Thanks, sir I do hope you enjoyed my homemade tool. If you have time please keep your watching to help me more improvement.
Thanks again
horizontal boring machine ?
@@servitec-g8e thanks for your comments. By the way Is not perfect for all but I had done some machines because this. So I have to thanks this drill press
Yes you should definitely key your spindle and pulley together
Thank you Stereo
I will try my best, I can see something went wrong between the spindle and pulley, not fick together when I do test 16mm drill bid on thick metal so I to update key way on spindle and pulley.
Ну да, у каждого в гараже стоит токарный станок🙂
Thanks
Wait you didn't key the Pulleys to the shaft? Brilliant, Laters...
Thanks for your suggestions I will add this. Thanks for sharing this word ( shaft )
🦾🦾🦾
Thank you for reaching my video I do hope you enjoyed my handy work 🙏
Provide a blueprint please 😢😢😢😢
Milling machine next project
@@DanielMeneses-1999
Thanks, Mr.Daniel for your best time to watch my handy work, I will try my best but can't promise because now I'm stuck with my main work for support my TH-cam channel seems too slow so have to support my family, especially my kids to school. In the old times, my work was good so I got some supplies and pay tools for my TH-cam channel. I'm thinking I should leave it or keep continue, if continue might slow project. I have income very little not enough to pay back materials and cost over expensive. Otherwise I have to finish homemade lathe first. I do need some gears for tracking carriage.
Thanks again
I love your all builds im inspired too you to build my own lathe and drill press but the tools is very expensive it takes a lot of saving to build Diy machine😊@@mr.ranyhomemade2466