Calibrating your Quick 861DW Hot Air Rework Station
ฝัง
- เผยแพร่เมื่อ 22 ก.ย. 2024
- Want your device fixed by a professional? Visit www.microsolder... for a free quote.
Want to learn microsoldering, but don't know where to start? We have an online microsoldering course hosted at Udemy called The Full Curriculum. The course goes over all of the basics of microsoldering to help you get started. Make sure that you purchase through the links below to receive a discount.
Microsoldering: The Full Curriculum: www.microsolder...
Equipment used in this video: www.microsolder...
Getting Started:
www.microsolder...
** Please note: This site contains affiliate links for which I may be compensated **
Recommended Tools:
Hot Air Rework Station (Quick 861DW): www.microsolder...
ZXW Tools Dongle Software: www.microsolde...
Microscope (AmScope SM-4TPX) : www.microsolder...
Nano Soldering Tweezers (JBC NASE-1B): www.microsolder...
Dual-port Soldering Station (Hakko FM-203): www.microsolder...
Micro Soldering Tweezers (Hakko FM-2023): www.microsolder...
Microscope Camera: www.microsolder...
Digiti Multimeter (Uni-T UT139C): www.microsolder...
DC Power Supply: www.microsolder...
DC Power Supply iPhone Boot Cables: www.microsolder...
Best solder (Kester 44 63/37 0.031"): www.microsolder...
Best Flux (Amtech VS-213A-TF): www.microsolde...
Green Solder Mask (Mechanic): www.microsolder...
Essential Microsoldering Accessories:
www.microsolder...
Touch IC Chips (Meson): www.microsolder...
Iphone Backlight Components: www.microsolder...
Where to get parts and supplies:
www.microsolder...
This site contains affiliate links for which I may be compensated
“Perhaps it’s this button” *presses button... station says... NO* 😂
It can never be truly calibrated for precision use because there are so many other factors, your ambient temperature, how close/far the tip is from work surface, tips angle, air pressure. But for rough approx reference, its good to see the calibration function in this device.
just what I was looking for. Thank you so much!!
maybe learn how to do it before you make a video?!
How do I Calibrate your camera skills?
What temp do you normally work at doing BGA work?
I have a clone of the repair station Quick-706. His name is UnionTest-706 (Russian low cost brand). Thermal stability is worse than the Quick-857D (857DW - brushless motor). Recently purchased also Quick-861DW. But I ordered the NK-850 nozzle in Poland. This adapter, which allows the use of standard nozzles from the 850 series station. That will save on buying expensive baits for large BGA chips. I'm sure this information was useful.
I would suggest not doing this so close to the meter - if the cold junction for the thermocouple is in the meter (or the plug) you're gonna throw off the reading accuracy because of the heat. Potentially a whole lot.
Where did you find the manufacture info? I can’t find any info on them?
hi. I am Sonia from Guangzhou SUNSHINE company. we sell original QUICK rework solder station, and all tools for mobile repair, if you are interested in please can contact me by whatsapp 008613602446894, i will send you a catalog
Thanks for the info.
I just don't understand why don't they calibrate it in the factory ? Its not so complicated or long process at all.
That was a bit confusing, I'm not convinced. Are you sure you actually performed a global calibration or simply saved a preset for channel 2 at 220º?
One way to find out...calibrate, then measure temp with thermocouple
plz help. maybe you know what the error is for this device
error H-E
Heater error
Can you tell me please what is the number that you calibrate with ? I mean the one you use .... thanks
400C 10 air flow, 6mm nozzle
I want to buy a Quick 861DW station in The Netherlands, but I'm afraid that I buy the fake one.
How can I check if the station is Original?
Marvin Boon I'm not sure. Just buy from a reputable dealer.
hi. I am Sonia from Guangzhou SUNSHINE company. we sell original QUICK rework solder station, and all tools for mobile repair, if you are interested in please can contact me by whatsapp 008613602446894, i will send you a catalog
Do you guys use a 110 to 220 transformer on this ? Or do they sell a 110v version. I've been googling around but can't find much information on this.
I think the 861DW is for 110V and the 861DE is for 220V.
Thanks You! I was unaware of the 861DE existence 👌🏼
Friend, you are mistaken. 861DW - Flow 120 liters per minute. 861DE - Flow 120 liters per minute. You can see the disassembly on the Fix Apple-The Kardi Lab channel. The 861DE has a very strong airflow. It takes a very long time to gain maximum flow in cooling mode. And very much noises. Dave at EEVBLOG (forum) has a photo of 861DW .. You can compare .. The same disassembly of the 861DW is on the Bga Mobile channel (i use google translator from RU. Ths.)
So in other words, 861DW is the way to go correct ?
oh.. my error.. copy-paste with translator.. sorry.. read as "861DW - Flow 120 liters per minute. 861DE - Flow 200 liters per minute".
if it is not necessary to solder large bga chip (video card or specialized industrial equipment) - 861DW is the "ideal" Hot Air Station. I can see is only one drawback - it is very expensive attachments. But he decided to purchase the nozzle NK-850 (I bought at Quick representatives in Poland). I would like to buy more Quick-860DA micro hot air station .. and compared in the living .. but it will not be before the end of the month of May. At the mini station very strong air flow and high noise .. but the high heat setting.
Hello it could calibrate 380 C and 6 air and WITH THE THERMOMETER mark 380 C is correct?
Yeah that will work
Thank you, you use it at 415 degrees and 10 air and 6mm tip ?
Yes I use the 6mm only for touch ic repairs. I use 4mm and air flow of 5 for almost everything else
Okay, but has it calibrated at 415 or 380 degrees for your jobs? Thank you
Hi , im hold the ch1 and ch3 keys simultaneously en my quick 861dw do not show CAL ,
WHERE CAN BE THE PROBLEM THANKS
Fernando Cheker make sure that it is off of the holder
Yes
does nothing
You are doing it wrong then.
Hold the CH1 and CH3 keys simultaneously For 10 seconds now if you can thanks
Dont get the point. I guess the machine could even walk and I am unaware of it. I use it only with normal temp control and fan control and I have present all 3 channels. What is the point of this calibration?
Consultation see the tip 6mm is the largest three?
6mm tip is the middle one
Thank you
Y do we need a calibration
You seem to be the only person that speaks English that owns a quick brand. I'm considering tracking down a 120v version, but wondering about tip nozzle compatibility. Will generic 850 style nozzles fit? Hope I don't have to buy special ones!
Thanks!
No, this unit uses proprietary tips.
Thanks for the reply! Still recommend quick brand now that you've had a chance to get to know it?
I worry about lack of support in the united states.
I might just hang on to my annoying cheap aoyue for now.
Yeah, I've used and tested Aoyue, Oki, and Quick hot air rework stations and I can say that the Quick is by far the best one. I'm testing the cheaper Quick 957DW right now.
I see MCM has the QUICK712A for $299 but they give like a 10-20% off code for new customers.
I wish Quick was more popular in the states, instead were flooded with no name Chinese stuff.
Thanks for this. Been looking at the 861DW to add to my bench. But still wavering. Have a couple of used options locally. Any advice on a used Hakko 850? Thoughts? Also know anything about Hakko's 703b and 807 desolder gun?
Unfortunately, I have never used the hakko hot air units.
I cant understand why did you calibrate the station !!!!!!!
I was at 500C and it still wasn't hot enough
+Microsoldering ok so why did you set it on 220C ?
actually I did not got your idea , because i have the same issue and am not able to solve that , will be more than happy ic you can help me out in personal.
Thanks.
JBC baby ! Worth every penny.
Tony Tone so expensive baby, and however jbc is no the big deal
I just recently got the Nase as well. I love it. I haven't tried much else except the old Metcal SP200 and Hakko 888D.
I refuse to pay $1,500 for their hot air station!!
Think it came out to be about $1,800 - $2,000 each. Worth it to me.
That's nuts.
you dont know anything, i think electronic is not your talent...do some other thing for a living, i ve watch one of your charging port replace that you totally damage everything....so sorry-from India(xcuse english us not my mothertongue)
jay hriata I think you are very wrong , Mike has done some brilliant videos and is very good teacher , I think your comments are very unjust , what are you doing in videos your self ?!? Do what you criticise or shut up
i dont say i am better, but comparition to other technician....its a mess, very bad for others to learn from his video