ฝัง
- เผยแพร่เมื่อ 26 ธ.ค. 2020
- #WOOD2WOD Project #2 - DIY Folding Wall Rack
In this video, I make a folding wall rack for less than $100! Very DIY friendly project that can help transform your home gym and keep you active!
Thank you so much for watching the video!
If you want to see more gym equipment builds and at home workouts, please like a subscribe to the channel!
If there is a piece of equipment that you've always wanted, but it just didn't work for your space, leave it in the comments below! I may tackle it in the next video!
INSTAGRAM
/ wood2wod
WORKOUT #1 - SUPERSET
5 Rounds:
Bench Press x 8
DB Bent Over Row x 8 each arm
WORKOUT #2 - LINDA’s COUSIN
For Time:
10-9-8-7-6-5-4-3-2-1
Bench Press
Front Squat
Assault Bike Calories (x2)
TOOLS
RYOBI 15 Amp 10 in. Sliding Compound Miter Saw
PORTER CABLE 3.2 Amp 5-Speed Bench Drill Press
BOSCH 1.0 HP Palm Router
BOSCH Orbital Sander (80/120 Grit Sandpaper)
METABO Drill and Impact Driver
MUSIC
www.epidemicsound.com/
OTE - I’m Indestructible
Epidemic Sound
Tigerblood Jewel - Foxtrot
Epidemic Sound
Wellmess - Tell Me Something New
Epidemic Sound
Swif7 - Don’t Wanna Sleep
Epidemic Sound
MATERIAL LIST (Price Updated 08Jun2021)
2 - 4x4x8 PT Lumber
2 - 2x4x8 Stud Lumber
1 - 3/4"x3' Black Pipe
2 - Felt Pads
1 - Door Hinge Pins (4 pack)
4 - 3.5" Door Hinges
4 - Zinc Hook Gate Latches
1 - 3" Screws (50 Count)
On the Lowe's website, before taxes, the order total for this comes out to just over $90 at my local store.
GENERAL CUT LIST
Vertical Wall Rack Beams (2) 4”x4”x6’
Cross Pieces (4) 4”x4”x11”
Horizontal Wall Mounts (2) 2”x4”x46”
Bar Mount Blocks (4) 2”x4”x7”
Galvanized Piping for Bar Mount (4) ¾”x9”
TIPS
Using felt pads instead of caster wheels works just fine and is cheaper.
I recommend using simple hook gate latches instead of the touch catches I used in the video. The hooks are much cheaper, easier to install, and provide a more secure locked position. I switched them out about a month after this build and they work great.
When drilling the holes for the vertical beams, I used a 1-1/8" spade bit. This ended up being a little too snug. I recommend drilling your holes to be 1-1/4" if you use 3/4" piping for the bar mounts.
Instead of using Foundation Straps to secure the hinge braces, you can use the left-over 2x4 lumber (Appx: 5') and cut some right-angle triangles to secure the Wall Rack Beams. Use 3" screws to secure in place. Be sure to pre-drill your holes so the triangles don't split when screwing them in.
I hope this helps everyone!
I’m so appreciative to come across this before I made the purchase. Now I can buy the weights and bench. Thanks!
This guy is underrated. He's gonna be big one day
I’ve watched a ton of these foldable racks, this is by far the best one!! Great info and clear instructions. I personally don’t have much space at all, just enough for a foldable rack and bench, so maybe for the next project adding a cable crossover to the rack? That would be super helpful 👍 great job, and great dogs 💪
Thanks Tom! I was actually thinking the same thing. Also working on a video for customizable weight plates, which should pair nicely with making an authentic-looking cable system that fits within the footprint of the foldable rack.
Great job looking good
Love to see a cable pull machine for lat pulldowns and back pulls!
Search BUFF DUDES
Dude, I'm working out the plan of my own squat rack. I had settled on the design... and you just complicated it all over again.
You got my 2 brain cells going! Great build dude.
Also you're freaking ripped!
Great build.
I love this !
Wow they really work out like crazy that was very inspiring.
Inspiring, well done.
Other ideas:
-Functional trainer/adjustable cable cross
-wall mount folding GHD
Folding GHD/Reverse Hyper is in the works! Also plans for cable machine are made and are on my to-do list!
Awesome video and workout.
You know what you get a follow. I dig it man. I’m gonna try it out.
Good job!
Wow that's amazing! Hope you make more videos soon
Very nice
"having trouble collecting my words for SOME apparent reason" :D Yeah you are. :) Great video!
Ye it feels like 2000 years to cut steel pipe by hand 😂❤✊️☮️
Wow, you look great, perfect muscles. Greetings from Germany 🇩🇪
Sup bro just watched your vid. Dam got me motivated to build 1. Awesome shit
Great work on the build, and even better work out! Keep up the good work
Is there a cut list, materials and cost break down anywhere bro? Really fancy recreating this!
Also keen to see you create anything that is a space saving home gym solution 👍🏻💪🏻
Great job I’m definitely gonna build my own just one question. How do you measure for when you fold it in without it hitting each other and being perfectly spaced apart so it folds in Nicely??
COOLEST FKN DYI RACK PLAN VIDEO ON TH-cam !!!
This dude is fucking genius by far best diy squat rack on youtube
Hi, Brandon! Cool idea! Powerful! 💪😎
More subscribles!
Wood2wod&2bod ) 😁
What kind of router bit do you use?
Anyway you can add measurement summary and cost of wood for this build ? I want to try to get it built this weekend
Hey Samantha, sorry I took so long responding. I added a comment with the materials and cut list I used. Hope this helps!
@@wood2wod619 I can,t find the measurements in the comments
When you mounted the gate hinges to the 2x6 you didn’t use 3in screws did you?
Did you have any issues with the 4x4 starting to split months later?
Also a great for “savesies”
Foldable GHD
Or soft plyo box
Foldable GHD/Reverse Hyper build is in the works!
Wow no pull up bar???
Not now with lumber price
Lumber prices are crazy right now. Here is a modified material list to make the squat rack:
2 - 4x4x8 PT Lumber
2 - 2x4x8 Stud Lumber
1 - 3/4"x3' Black Pipe
2 - Felt Pads
1 - Door Hinge Pins (4 pack)
4 - 3.5" Door Hinges
4 - Zinc Hook Gate Latches
1 - 3" Screws (50 Count)
On the Lowe's website, before taxes, the order total for this came out to just over $90 at my local store.
General Cut List
Vertical Wall Rack Beams (2) 4”x4”x6’
Cross Pieces (4) 4”x4”x11”
Horizontal Wall Mounts (2) 2”x4”x46”
Bar Mount Blocks (4) 2”x4”x7”
Galvanized Piping for Bar Mount (4) ¾”x9”
Instead of using Foundation Straps to secure the hinge braces, you can use the left-over 2x4 lumber (Appx: 5') and cut some right-angle triangles to secure the Wall Rack Beams. Use 3" screws to secure in place. Be sure to pre-drill your holes so the triangles don't split when screwing them in.
Hope this helps!
@Wood2Wod Could you please pin your coment?