After you reset it and set FastSettings, make sure you no not press LiFePO4, Sodium ion, Ti-Liion button anywhere, including the BMS control page. This changes the chemistry the BMS thinks you are using and might be creating that UnitVoltageCheckWrong warming. I can see someone has been messing with settings and many are screwed up. Factory reset and fast settings will fix most of them but I can help you set it correctly for each setting if it’s working correctly after reset. If after reset and fastsettings are set, let it rest 60 seconds and autobalance should kick on automatically.
@@govtv4075 as soon as you press ResetFactorySettings and press save, it should be reset. You will know because your ANT is 24s default. So when you go to FastSettings, if you see 24 series, you know its reset,
@@govtv4075 ,the balancing process will automatically start 60 seconds after you get the Fast Settings set correctly. But it will take some time to balance because your pack is not balanced yet.
@@govtv4075 , first priority is see if the factory reset and setting fastsettings fixed it. If yes we can setup your ANT correctly. If not then something is wrong somewhere.
After you Factory reset it and set fastsettings you may need to charge it for a little while to get voltage high enough to automatically balance. Default autobalance needs to be above 4.100v and someone changed yours to 4.000v. They also messed up your autobalance start and atop values. Also someone screwed up your current protection values. Once the BMS is working, i can show you how to set it correctly.
Hi Bro, i got the same problem, my ant bms wont charge my battery and in the warninginfo it says a yellow dot before CHargeMOs and a yellow dot before dischargeMOs. How did you fixed this?
After you reset it and set FastSettings, make sure you no not press LiFePO4, Sodium ion, Ti-Liion button anywhere, including the BMS control page. This changes the chemistry the BMS thinks you are using and might be creating that UnitVoltageCheckWrong warming.
I can see someone has been messing with settings and many are screwed up. Factory reset and fast settings will fix most of them but I can help you set it correctly for each setting if it’s working correctly after reset.
If after reset and fastsettings are set, let it rest 60 seconds and autobalance should kick on automatically.
Hi imho, how long it will take this balancing process after i reset the bms?
@@govtv4075 as soon as you press ResetFactorySettings and press save, it should be reset.
You will know because your ANT is 24s default. So when you go to FastSettings, if you see 24 series, you know its reset,
@@govtv4075 ,the balancing process will automatically start 60 seconds after you get the Fast Settings set correctly. But it will take some time to balance because your pack is not balanced yet.
@@govtv4075 , first priority is see if the factory reset and setting fastsettings fixed it. If yes we can setup your ANT correctly. If not then something is wrong somewhere.
Thank you imho God Bless you bro
Okay bro i'll try thank you, gonna get back to you.
After you Factory reset it and set fastsettings you may need to charge it for a little while to get voltage high enough to automatically balance.
Default autobalance needs to be above 4.100v and someone changed yours to 4.000v. They also messed up your autobalance start and atop values.
Also someone screwed up your current protection values.
Once the BMS is working, i can show you how to set it correctly.
Hi Bro, i got the same problem, my ant bms wont charge my battery and in the warninginfo it says a yellow dot before CHargeMOs and a yellow dot before dischargeMOs. How did you fixed this?