It's awesome, I have immediately noticed that red fog "Does Lee have new channel graphics?". But I think it would be great to add some sound effects / music to intro.
Dude you're so underrated, I really hope more people see your content, I love what you're doing and hope to learn more from you as I catch up on all your videos and hopefully start building by EMTB soon and catch the eyes of more people around my community so they can get into the sport ✊
Thanks for all the teachings you provide. You have been the mayor inspiration pointing tours DIY projects thanks for all the time you take for us out here. Respect Brotha.🤛🏼
I really like the look of that case for the spintend esc, if one of my Escapes goes il most likely go with that ESC (if it passes your tests) and that sexy looking case.
@@LeeWright Yea but if the demand for them rises more manufacturers will make some. Flipsky already has 140kv and turnigy 130kv. with a 1:5 Transmission that's already fine for 20s. I have even seen some odd 120 to 100 kv mtors on alibaba. Imagine getting double the power from the same motor size compared to 10s.
@@tech518b9 absolutely but it’s not only about kv, you have to consider operating voltage too but I totally agree - create a market and people will bring the products
@@LeeWright 20s is still in the safe area. DC Vorlage under 120V is considered not dangerous by most regulations. I upgraded my 13s E bike to 20s and only felt a slight tingle touching the battery. im very interested to see how fast the esk8 world follows the tend to high voltage.
Lee Wright hi bro hope your well mate and your family.? Yesterday I bought the ubox vesc and uni1 coming soon. So excited .👍🏽😉Just a few questions. Do I programme it on the normal vesc tool,? And would I need program both sides treating as singles.? Thanks mate.
Please make a video on 12s vs 18s and why you may want the higher voltage. Example Stooge rides a 6s setup and hits 50mph+ vs someone on a 18s who does...? What are the reason we may consider high voltage for our builds?
Thanks for the quick response Lee! Were you pulled away by other projects or did you run into an issue running 16s on the spintend? I just had one delivered for this project.
Hey man love your videos? Can this esc be used as a “Super Single” since it’s a single MCU? Also what KV motor would you recommend for a high voltage mountain board?
No it can't be used as a super single unfortunately. As for kv, use an esk8 calculator and play around, it's also going to depend on your gearing and wheel size
Quik question, i got a E board and my bms is not working, can i make it work with any bms? If i want to buy it on my e board store they sell me the whole battery. Thanks!
With a 3 part battery pack does that mean you could take each part on a plane separately to travel ?? Don’t know exactly how it works with travelling with batteries but I think that smaller is better right.
I have the same plan for my now 12S board; Spintend+setup on the rear truck with Matrix'. Any chance you want to sell/send a prototype for mounting it my way, bud? :)
Do you mind sharing 3d file? I'm starting 3d designing for my vesc 6.6 in fusion 360 and may use this to mess around 🙂 all i can do for now is a box with 😁
Will you be using the spintend? I just finished one using a spintend and 15S battery with 140kv motors. It’s still fresh so needs more testing but initial tests show scary speed for a mtn board.
Id recommend you check some of my other videos out on batteries where I explain all this stuff, have a watch of my ultimate BMS guide and that will tell you a lot!
![CAMPปลิ้น | EP.83[2/2] ประสบการณ์ขนหัวลุกจากตำนานวงการผี!](http://i.ytimg.com/vi/T_kFecQw7Ds/mqdefault.jpg)
New channel animations - yay or nay?
Ayyy new animations are sweet 👌
ya love them lee.
Looks great! My one note is that i feel it would look better if the red smoke didn't obscure the LW so much in the first half in the intro
It's awesome, I have immediately noticed that red fog "Does Lee have new channel graphics?". But I think it would be great to add some sound effects / music to intro.
Love it Bro. Keep it going.
These battery-making sequences are so cool
Thank you brother!
Bought the Spintend Ubox and Uni1 about 5 months ago. Running hard on 14s. No issues yet. Paired with Flipsky battle hardened 6374s. Great Ecu
I need to get me a Lee Wright workshop! Thanks for sharing.
Loool, just my garage dude! Bit cramped but I make it work
Geez, way to make it all look so easy
😂😂😂
Another build bro, another winner 🙌🏽👊🏽
Thanks Mark! Should be a good one!
Dude you're so underrated, I really hope more people see your content, I love what you're doing and hope to learn more from you as I catch up on all your videos and hopefully start building by EMTB soon and catch the eyes of more people around my community so they can get into the sport ✊
yeah bro! Thank you, I just do my thing and if people learn from it then thats awesome!
Your videos are getting better and better mate! :)
Thanks dude! I'm trying to constantly improve but still keep it fun for me and relatively easy to produce 1 per week
This is exactly the video I want to see! I want to get the spintend pro and haero deck! Thank you for doing this project now.
Yes bro! I think it's going to be a winning combo!
that's some high quality content. loving it.
Thanks brother!
Thanks for all the teachings you provide. You have been the mayor inspiration pointing tours DIY projects thanks for all the time you take for us out here. Respect Brotha.🤛🏼
Big love brother! Thank you
Love the montage man. That board will be sick! Can't wait to see the finished product.
Thanks bro!
I love your flawless editing skills. Fantastic work on the battery packs.
Thanks bro!
Superb video
This was a joy to watch! The editing effort you put in really shows! Your presenting skills are improving as well :D
Thank you brother! Im glad it is noticable!
Wow that's cool brooo... I lile those wheels really BIG 😃👍
Great video Lee !! nice machine to have for sure..
Well presented xo
With all the interest in different battery configurations it’s interesting to see where all these battery setups go with 10s, 12s, 18s etc
I agree dude, I think 16S is a sweet spot. 18S limits motor selection too much with what’s available today
Loving the 16s and multiple voltage options will be interesting to see the results! Also cool how you make everything yourself 👌👍
Thanks bro, yeah - true DIY really. I like making the parts myself where I can!
Looking good 👍🏻
Thanks Dan!
Really interested in those results, as I'm about to do a similar upgrade! Hope to see the next episodes quickly!
hopefully dude! See how we go - ive got a lot going on but it wont take long to finish this
@@LeeWright Keep up the great work!
I'm back in the esk8 world after a rough year, love to watch your videos!
@@Tiagolilian Thanks bro!
3:49 me when i see your Battery building montage
Loooool - glad you enjoyed that bro!
I really like the look of that case for the spintend esc, if one of my Escapes goes il most likely go with that ESC (if it passes your tests) and that sexy looking case.
Yeeeeee, I think this controller will be good tbh
Great board. Higher voltage is the future. I would like to go straight to 20s since that's pretty common in EUCs and high power E bikes.
Limited motor options at really high voltage though 😥
@@LeeWright Yea but if the demand for them rises more manufacturers will make some. Flipsky already has 140kv and turnigy 130kv. with a 1:5 Transmission that's already fine for 20s. I have even seen some odd 120 to 100 kv mtors on alibaba.
Imagine getting double the power from the same motor size compared to 10s.
@@tech518b9 absolutely but it’s not only about kv, you have to consider operating voltage too but I totally agree - create a market and people will bring the products
@@LeeWright 20s is still in the safe area. DC Vorlage under 120V is considered not dangerous by most regulations. I upgraded my 13s E bike to 20s and only felt a slight tingle touching the battery.
im very interested to see how fast the esk8 world follows the tend to high voltage.
Sooo.... have you considered building a Barbie keep? 4wd? Like get one and strip it down. That’s something I’d pay for
A barbie jeep? That would be fun yes!
07:58-07:58 dodo :))
We do do, yes we do do
Cant wait to see the 16s build
Wanna make one too 👍😬
When will the next vid be available?
Kr
AYYEEE
Ayyyyyyyyyeeeeeee
AAYYYYYYEEEEEEEEEEEEE
@@Sebas-lv1gk chhhogggggggeyyyyyyyyy
Lee Wright hi bro hope your well mate and your family.?
Yesterday I bought the ubox vesc and uni1 coming soon. So excited .👍🏽😉Just a few questions.
Do I programme it on the normal vesc tool,?
And would I need program both sides treating as singles.?
Thanks mate.
Just use helical thread repair inserts or normal inserts on the mounting holes you drilled too big. The right size could fit to M4.
Good idea
Please make a video on 12s vs 18s and why you may want the higher voltage.
Example Stooge rides a 6s setup and hits 50mph+ vs someone on a 18s who does...?
What are the reason we may consider high voltage for our builds?
will do Zach! its a good idea for sure
The real question here is, how are the motors?
Noice hoodie btw
A little chhhogggyyyy but other than that I don’t know
Are they cogrrrgidt ?😳😳
@@kutvisshityfish7812 GOGGGGIIIIIIII GEE GEE GEEE RA RA RAA
Part 2 pls
Gday Lee great to see the MTB build again, would the spintend work with a puck?
Gday chief, absolutely mate, you can use any PPM or UART remote
@@LeeWright good to know, options are endless. cheers mate.
I'm nicely surprised that you were able to make the heatsink in house.
It’s nice to be able to do that!
I can't find any more videos on this topic. Did you do more? I just ordered some 138kv bio board Motors that are good for 20s but I plan to use 16s.
I didn't mate, I scrapped this build. Sorry about that!
Thanks for the quick response Lee! Were you pulled away by other projects or did you run into an issue running 16s on the spintend? I just had one delivered for this project.
@@Ben_jamin50 pulled away by other stuff mate and decided to scrap this. The spintend is a great ESC, you will love it
Thinking about doing the same thing except planning on going with 18s. How did your set up end up working out?
@@TheHowToWinPodcast I haven't gotten much further at all yet. Work and the holidays have me pretty busy. Plan is to go with 16s using the ubox V2.
Yes ltd edition you battle hardened motors as well I think?
Yes that’s right, the motors I battle hardened!
@@LeeWright it's going to be sick bro.😎👌
Hello.
What do you think about lifepo battery Instead of lion in esk8??
hey lee how is the 16s project going on?
any updates on this?
kr
Hey man love your videos? Can this esc be used as a “Super Single” since it’s a single MCU? Also what KV motor would you recommend for a high voltage mountain board?
No it can't be used as a super single unfortunately. As for kv, use an esk8 calculator and play around, it's also going to depend on your gearing and wheel size
Quik question, i got a E board and my bms is not working, can i make it work with any bms? If i want to buy it on my e board store they sell me the whole battery. Thanks!
What motors are good for 16s? Can you use 6374s?
What's your experience with Alien Power Systems motors, good?
No experience as of yet
With a 3 part battery pack does that mean you could take each part on a plane separately to travel ?? Don’t know exactly how it works with travelling with batteries but I think that smaller is better right.
Unfortunately not, both of the 6S packs are over the limit for flying, I’m never putting an electric mountainboard on a plane.
Lee is there a way I can send you updates on my build and get your thoughts on the idea as it goes?
Contact me on Instagram dude 👍
Tune during milling pls?
I have the same plan for my now 12S board; Spintend+setup on the rear truck with Matrix'.
Any chance you want to sell/send a prototype for mounting it my way, bud? :)
Lee, do you have any experience with 3d servisas products?
none bro, they havent as yet sent me anything to look at
Any update on this build ?
Yes, dead project. Redoing it with different bits
Koolaid incoming
Noice!
When EP2?
🙋♂️✌️
Bonjour mon ami 😄👍
Can you post the file for the 3D printed box. I have been looking for one everywhere
😔😔😔😔 news Power KV MOTORS...100KV.....
Do you mind sharing 3d file? I'm starting 3d designing for my vesc 6.6 in fusion 360 and may use this to mess around 🙂 all i can do for now is a box with 😁
Maybe later, it’s something I’m going to start sharing with my patreons first - think it’s a nice perk to get all the files
@@LeeWright thanks, to be honest any box shape with holes would do me for start so I could see objects used. Keep up the good work!
any news about this build?
Abandoned sadly, will be building a new board very soon!
@@LeeWright hope it will be high voltage one
@@RoiAloosh it is dude. I'm just about to start building it!
Will you be using the spintend? I just finished one using a spintend and 15S battery with 140kv motors. It’s still fresh so needs more testing but initial tests show scary speed for a mtn board.
I thought you were Bam Margera 🤔
😅😅😅 Bum O'Deara
Who’s the one bastard disliking this video??
I could guess..... but I'll refrain from pointing fingers!
🤣🤣🤣
what does 12S mean? Love to understand the battery section. Really want to like but need less acronyms and model codes please…
Id recommend you check some of my other videos out on batteries where I explain all this stuff, have a watch of my ultimate BMS guide and that will tell you a lot!