I Really Enjoy the ToughBuilt measuring tape/s, very well designed for my Work. And, sometimes, they tend to walk away from my tool bag/s, bummer… next time am looking for Tools, will get ToughBuilt.
I am an electrician and I have 4 clips on my belt. 2 are always in use holster and technician mini bag. I swap out to a master electrician bag when I need more tools. The other 2 is a larger holster for a m12 sds and for a large mouth bag for straps screws and conn/coup. If I have to get into a tight space I just unclip or drop the bags and run to the van
I love my set up! I also made a stand with a handle and four clips and it acts like a bucket boss without losing track of tools.I can transport in and out of the truck very quickly .
best tool bags ever. been using toughbuilt for years and it holds up very well. I dont keep my tools on all day long so it's super convenient to be able to unclip the bags whenever I need. love it.
Great system, been using it more and more. As a handyman, I travel to a job site and depending on what job I’m tasked with, I grab my belt and attach whatever pouch I need from the rail I have mounted inside my truck cap/tool crib. I also have the rolling large bag as well to carry extras
I was really excited when I found this system a few months ago. I have been slowly picking up pouches. Thank you for this review! It has been very hard to find reviews or ways of using specific pouches. I like to see more of the pouch or details before I purchase. Its difficult to see all of the pockets or sizes just from photos. My local home depot has zero selection so I have to buy it all online.
Lowes is the only big box retailer that carries Toughbuilt. Mine has a few of these pouches, but not all of them. It’s still good to pick them up and get a feel for their size and quality that pictures online can’t convey easily. Oh, Tractor Supply also carries their saw horses.
I don't even wear a tool belt anymore because it only weighs me down. I'm a big believer in using the belt clip that comes with the drills because I normally have a PH #2 bit ready and that's mostly all I use. I also have pocket tee's for holding stuff like wire nuts, ground screws, 6/ 32's etc., etc,. I do like this system though.
I think one of the best things about this whole system is that, if I don't need a pouch for a particular job, I just take it off of my belt. No fucking around with taking off a whole belt setup, just one button press and it's off, and on just as quickly. Plus the big pouches holding your fasteners, if you're working in one area, just use the kickstand and it's all there, just not weighing you down. It really is a great design.
I jad a dewalt leather belt i modified took dome rivets out yo create more storage and the belt was a beast but uncomfortable and heavy and tlstrained my lower back so i hit the tb systen and its so convenient when im in a dormer and i can take a poch off and set it on yhe roof its a great system now as far as bags go veto oro oac Takes the titke but fir work belts i use tb system now over my bekived DeWalt
I really love your video, ima go for the biggest 72 cm box for my hand tools, was only wondering if also 2 handsaws would fit in there cause they’re always lingering around. Maybe you know? Looks definitely so much better than Stanley of whatever you might have. Also really love the screwdriver holder!
“One thing I really like about dewalt”… that every other power tool brand does and has done since their inception 😂 Great video though! Just thought that line was funny (as a makita man myself). Also, do all of you Americans wear tool belts to the front like Tim Taylor from Home Improvement? How do you climb a ladder or squat with tool bags in front of your legs? 🤔
Couldn’t agree more mate. 50 yr old Irish carpenter. Always loved the American attitude towards tool belts. Everything to the back and sides. Watching my fellow tradesmen spilling stuff when they climb scaff/ ladders … anyway, have had some success convincing lads on the Toughbuilt system.
Hey there, this is the same brand as my old belt/apron: amzn.to/3s2WoBR and this is another toughbuilt one that I don't think we listed beneath the video: amzn.to/3e3eXhr
Hi Sir! Have you tried any of their new product line aviation snips , knives, scissors, seamer ? If yes, do you have opinion about them? Thanks for you answer! Cool video!
I love tough built gear and use it every day, but that particular drill holster your using is absolute rubbish it hits the trigger of everything I've ever tried putting in it from drills to impact drivers, it's the only bit of tough built gear I own that I've had issues with
Agreed on that holder. It does work well with a m12 impact. As long as you use a small battery. If I use my dewalt 850 I have to use a longer bit to keep it in the holster
![[LIVE] : ONE ลุมพินี 76 | คู่เอก "ผึ้งหลวง vs สมิงดำ"](http://i.ytimg.com/vi/9SBshmGQOIM/mqdefault.jpg)
I Really Enjoy the ToughBuilt measuring tape/s, very well designed for my Work. And, sometimes, they tend to walk away from my tool bag/s, bummer… next time am looking for Tools, will get ToughBuilt.
I am an electrician and I have 4 clips on my belt. 2 are always in use holster and technician mini bag. I swap out to a master electrician bag when I need more tools. The other 2 is a larger holster for a m12 sds and for a large mouth bag for straps screws and conn/coup. If I have to get into a tight space I just unclip or drop the bags and run to the van
nice set up, they definitely make working on different tasks a lot easier.
I love my set up! I also made a stand with a handle and four clips and it acts like a bucket boss without losing track of tools.I can transport in and out of the truck very quickly .
sounds sweet! they definitely help me speed up productivity
best tool bags ever. been using toughbuilt for years and it holds up very well. I dont keep my tools on all day long so it's super convenient to be able to unclip the bags whenever I need. love it.
Great system, been using it more and more. As a handyman, I travel to a job site and depending on what job I’m tasked with, I grab my belt and attach whatever pouch I need from the rail I have mounted inside my truck cap/tool crib. I also have the rolling large bag as well to carry extras
Absolutely love my toughbuilt clip tech pouches😎😍😎😍😎
they are a pretty cool system, I love them too
Wow, your bags are dirty, love it. Hard working man right there. Good video.
after I watched 1 of your videos. I went out and purchased one. So far I like it. thank you for the great content.
thank you! enjoy
Lows is carrying those now
👍🏻🍻🍺🤙🏼
sweet!
I just zip-tied a toughbuilt clip onto a multitool sheath; the clip doubles up as a little kickstand!
sweet, good idea
Good post. I Love the tough built system. Tks😊
I was really excited when I found this system a few months ago. I have been slowly picking up pouches. Thank you for this review! It has been very hard to find reviews or ways of using specific pouches. I like to see more of the pouch or details before I purchase. Its difficult to see all of the pockets or sizes just from photos. My local home depot has zero selection so I have to buy it all online.
Lowes is the only big box retailer that carries Toughbuilt. Mine has a few of these pouches, but not all of them. It’s still good to pick them up and get a feel for their size and quality that pictures online can’t convey easily.
Oh, Tractor Supply also carries their saw horses.
I don't even wear a tool belt anymore because it only weighs me down. I'm a big believer in using the belt clip that comes with the drills because I normally have a PH #2 bit ready and that's mostly all I use. I also have pocket tee's for holding stuff like wire nuts, ground screws, 6/ 32's etc., etc,. I do like this system though.
I think one of the best things about this whole system is that, if I don't need a pouch for a particular job, I just take it off of my belt. No fucking around with taking off a whole belt setup, just one button press and it's off, and on just as quickly. Plus the big pouches holding your fasteners, if you're working in one area, just use the kickstand and it's all there, just not weighing you down. It really is a great design.
I jad a dewalt leather belt i modified took dome rivets out yo create more storage and the belt was a beast but uncomfortable and heavy and tlstrained my lower back so i hit the tb systen and its so convenient when im in a dormer and i can take a poch off and set it on yhe roof its a great system now as far as bags go veto oro oac Takes the titke but fir work belts i use tb system now over my bekived DeWalt
I really love your video, ima go for the biggest 72 cm box for my hand tools, was only wondering if also 2 handsaws would fit in there cause they’re always lingering around. Maybe you know? Looks definitely so much better than Stanley of whatever you might have. Also really love the screwdriver holder!
“One thing I really like about dewalt”… that every other power tool brand does and has done since their inception 😂 Great video though! Just thought that line was funny (as a makita man myself). Also, do all of you Americans wear tool belts to the front like Tim Taylor from Home Improvement? How do you climb a ladder or squat with tool bags in front of your legs? 🤔
Couldn’t agree more mate. 50 yr old Irish carpenter. Always loved the American attitude towards tool belts. Everything to the back and sides. Watching my fellow tradesmen spilling stuff when they climb scaff/ ladders … anyway, have had some success convincing lads on the Toughbuilt system.
Cant believe ppl use them infront 😂 i would understand some standing jobs give me those vintage woodworker vibes
Hey man, great videos. Any chance of a Packout breakdown and seeing your setup/preferences? Thanks again..
Thats cool!
Why didn’t you try the drills with the Batteries on. I heard the 20 volt drills or impacts tend to fall out.
I’m curious what that red pen is in your apron pocket?
That’s a haultaforce mechanical pencil
What is the name of the drawers on the counter behind you?
That’s a dewalt Tstak 2drawer unit, and a single drawer.
What’s your tool apron?
How are you attaching your dewalt power tools to your cabinets?
Looks like each of his power tools has a belt clip and they just hook on a screw. I could be wrong though
Thinking hard about getting the 4 pc contractor set up for trim and framing. How is the durability of these? Great video thanks for info
they are great, have not failed me yet
What is the make and model of the tool belt/apron you are wearing?
Hey there, this is the same brand as my old belt/apron: amzn.to/3s2WoBR and this is another toughbuilt one that I don't think we listed beneath the video: amzn.to/3e3eXhr
Hi Sir! Have you tried any of their new product line aviation snips
, knives, scissors, seamer ? If yes, do you have opinion about them? Thanks for you answer! Cool video!
I haven’t, might have to check them out one day. Thanks for watching
Retract your blade! My god! 😂
I was waiting for him to retract it too. To each their own.
I love tough built gear and use it every day, but that particular drill holster your using is absolute rubbish it hits the trigger of everything I've ever tried putting in it from drills to impact drivers, it's the only bit of tough built gear I own that I've had issues with
Agreed on that holder. It does work well with a m12 impact. As long as you use a small battery. If I use my dewalt 850 I have to use a longer bit to keep it in the holster
+