I got the exact same rims in orange. Love the finish. Still waiting for a new pinion, spur gear and my new body to throw on, before I upload my video. Hopefully this week. BTW, love your landing on the wheel!
Those rims look amazing! Oh man, I cracked up when the truck landed on top of the wheel like that! I love a good bashing vehicle! Must take quite some time to set all of those screws, but well worth it for how it looks 🙂
Yep, my lugs came off too, as well several of the bead lock screws flying out while driving. No where did anyone mention that you'd have to thread lock every single fricking screw. Even worse, the inside beadlock screws ripped through my tie rods like a hand saw causing the rods to snap at the ball ends just causally driving off the curb into the street. Those wheels are expensive shelf items for display only. They destroy the truck.
looks nice ... but looks smaller that the stock tires.. the big question is Wich set of hex do you use for that wheels cause in the rims.the part of the rim where the hex enters is different from the one that comes in stock. so....
Check out the Pro-Line 1967 FORD F100 precut clear body for the UDR also do a painted one in the Isenhouer Heatwave livery which I like but have ordered a clear to try and do a patina, silver on the inside colour on the outside or different colour panels also. Love the wheels will be getting a set I have the Vitavon V1 and waiting on the RC4WD Raceline Monster beadlock wheels and a set of Pro-Line Hyrax tyres hoping they will fit the RC4WD wheels will the Teal wheels fit the Hyrax ones. RC4WD do a few other scale parts for the UDR nicely done check them out.
I don't like the black rim. I'm gonna order the Vitavons as they got the shiny rims. As far as fit and performance.. Any opinions on the Vitavon vs treal?
can i use proline dumont tires on this and im asking this because some wheels have a version for proline hyrax and i wanna know if i should get that because maybe that would work like maybe that brand has a special mount feature
Can't go wrong with either one, with Vitavon you can message him and he can anodize in almost any color you want to your specs. Not sure if Treal will do that. Both are great wheels.
@@ExocagedRC Good to know thanks for the quick response. I knew building my own udr was the way to go, the rc world has come along way since I built my tamiya 190E Mercedes. 😃
@@ExocagedRC hahaha Mojave for bash cause the udr don't resist the hard hit on the the ground when you launch. U see in the video nor in soft ground resists. The udr it's not compare with arena Mojave 💪🏼
I tried that , I could not get the Proline Hyrax tires to fit - I do not have original traxxas UDR tires to compare the difference between the Proline and Traxxas beats - there must be a difference there - ended up gluing the Hyrax tires on Traxxas plastic wheels ...
Landing on the runaway wheel pure luck no way could that be planned bar doing CG effects, Nope you have to buy the paddles mounted bummer I hate getting tyres off the rims when glued ugh. Hoping I do not have to buy the V2 Vitavons for my Hyrax tyres as have ordered some RC4WD billet rims, even these are worrying as they say you have to buy two types front and rear supposedly different but no one can tell why or what the difference is and a bigger problem fronts are out of stock world wide, wish the Teal and Vitavon V2 were available when I ordered the Hyrax tyres and RC4WD Raceline Monster Replica wheels I have two sets of these by RC4WD on my 5th scale gas and they look good, I wanted the UDR ones to go with the Pr0-Line 1967 Ford F100 body as they are what you see on a lot of the 8100 and & 7100 class vehicles. get the Pro-Line body instead of a clear TRAXXAS UDR body I have one I painted white and got a wrap made a copy of the TOYOTA TRD Ironman Ivan Stewert livery it looks good even found scale side mirrors fitted the TRAXXAS window nets and light kit also, all the Vitavon parts available fitted plus Hot Racing GPM for scale appearance so now have to run it on 6S all the time as the weight plus alloy wheels as spares also so a little sluggish on 4S well was a bit that way out the box. Is yours running 6S still or 8S and a different motor and gearing I cant remember and cant find it in your video collection.
Epic! Laughed so hard when you stuck the landing! Thanks for a good laugh!
Awe YEA EXO!!! We are going to the lake next weekend, time to bust out the paddles!!!
I got the exact same rims in orange. Love the finish. Still waiting for a new pinion, spur gear and my new body to throw on, before I upload my video. Hopefully this week.
BTW, love your landing on the wheel!
Those rims look amazing! Oh man, I cracked up when the truck landed on top of the wheel like that! I love a good bashing vehicle! Must take quite some time to set all of those screws, but well worth it for how it looks 🙂
Wow the wheel coming off and the back wheel catching underneath👍🏿Epic!
That wheel almost put itself back on ! Plus you got it on Video !
That tire coming off and landing I. Means the best’
Yep, my lugs came off too, as well several of the bead lock screws flying out while driving. No where did anyone mention that you'd have to thread lock every single fricking screw.
Even worse, the inside beadlock screws ripped through my tie rods like a hand saw causing the rods to snap at the ball ends just causally driving off the curb into the street.
Those wheels are expensive shelf items for display only. They destroy the truck.
Treal makes some nice beadlocks I have the same ones you put on your scx 3 but in Crome. Very easy to install
looks nice ... but looks smaller that the stock tires.. the big question is Wich set of hex do you use for that wheels cause in the rims.the part of the rim where the hex enters is different from the one that comes in stock. so....
Check out the Pro-Line 1967 FORD F100 precut clear body for the UDR also do a painted one in the Isenhouer Heatwave livery which I like but have ordered a clear to try and do a patina, silver on the inside colour on the outside or different colour panels also.
Love the wheels will be getting a set I have the Vitavon V1 and waiting on the RC4WD Raceline Monster beadlock wheels and a set of Pro-Line Hyrax tyres hoping they will fit the RC4WD wheels will the Teal wheels fit the Hyrax ones. RC4WD do a few other scale parts for the UDR nicely done check them out.
Tire coming off and it landing on it was awesome lol
Love the "cleaning off what I call wet sand". lol.
Sand tires are cool!
Nylon locknuts are designed for one time use, so it was only a matter of time.......😎
Been using same nuts on both my kids stampedes for years. And I've had wheels off hundreds of times
Do the rims over heat the electronic and motor with the added weight
Awesome man
Trying to decide if I should get the Vitavons or Treals….hmmmm
Tough one. Either way if you’re ordering from China you need to get that done before they start their Chinese New Years holiday.
I don't like the black rim. I'm gonna order the Vitavons as they got the shiny rims. As far as fit and performance.. Any opinions on the Vitavon vs treal?
what are the beadlocks for and why are they better
That UDR is awesome 🔥🔥🔥sweet wheels
Proline has a really cool Ford body for the UDR. Be sure you check it out! Stay safe!
They look great! Would you know how much they weigh?
I didn’t weigh them but they are a bit heavier which can help when controlling the pitch of the truck in the air.
What wheel hexes are u using??
😂😂😂 Very epic!! So funny. 😁
Hi I’m curious if you had issues with the Treal wheels fitting your vitavon hexes on the UDR ?
Some are tighter than others. Not a big deal though.
Thx so much..funny watching your videos right now…where in Florida are you? I’m in Davie/Weston area, just west of Ft.Lauderdale…
can i use proline dumont tires on this and im asking this because some wheels have a version for proline hyrax and i wanna know if i should get that because maybe that would work like maybe that brand has a special mount feature
Will these fit on the lasernut with hex adapters
Possibly, I haven't tried
Nice looking rims 👍 Will they fix Hyrex tires 🤔 If so could be a cheaper option for the Mojave
Need a red body for the UDR would look awesome
Yeah it had the red when I first got it. Now I gotta go back to red. LoL.
Exactly how well do these stack up to the vitavon beadlocks?
You should do a vs review, I think that would get quite a few views.
Can't go wrong with either one, with Vitavon you can message him and he can anodize in almost any color you want to your specs. Not sure if Treal will do that. Both are great wheels.
@@ExocagedRC Good to know thanks for the quick response. I knew building my own udr was the way to go, the rc world has come along way since I built my tamiya 190E Mercedes. 😃
Doesn't have the teeth to lock them to the tire like the other ones you have?
These use the normal beaded sand tire. It doesn’t need the teeth in there like the hyrax does
Omg freakn epic 😂💯💪👍
lucky catsh the wheel :)) nice Video
lmao that was a once in a life time moment. Was pretty awesome though :)
Get one of those new proline udr bodies
Yeah this body is about done for
Do you still have the tp motor in this?
Why did you ditch the Vitavon wheels?
I think the Vitavons are made specific for the Hyrax tires.
Yeah I’ve got the Vitavons as well. But the hyrax require a different bead design than the normal stock Traxxas tires use.
Which do you prefer mojave or udr ?
Udr for scale awesomeness and Mojave for bashing awesomeness
@@ExocagedRC hahaha Mojave for bash cause the udr don't resist the hard hit on the the ground when you launch. U see in the video nor in soft ground resists. The udr it's not compare with arena Mojave 💪🏼
I’d like to see you do a hydroplane with the udr
Will these fit on the mojave?
You would have to drill out the center hole to make them work. I’m tempted to do that just so I can use these on my own Mojave.
Put those on the Mojave
I want to and it may happen.
bake @350 degrees for about 12-15 minutes....tire come right off
Just ordered the last set of off amazon using your link. Any idea if the Hyrax tires will work with these?
I tried that , I could not get the Proline Hyrax tires to fit - I do not have original traxxas UDR tires to compare the difference between the Proline and Traxxas beats - there must be a difference there - ended up gluing the Hyrax tires on Traxxas plastic wheels ...
Landing on the runaway wheel pure luck no way could that be planned bar doing CG effects, Nope you have to buy the paddles mounted bummer I hate getting tyres off the rims when glued ugh. Hoping I do not have to buy the V2 Vitavons for my Hyrax tyres as have ordered some RC4WD billet rims, even these are worrying as they say you have to buy two types front and rear supposedly different but no one can tell why or what the difference is and a bigger problem fronts are out of stock world wide, wish the Teal and Vitavon V2 were available when I ordered the Hyrax tyres and RC4WD Raceline Monster Replica wheels I have two sets of these by RC4WD on my 5th scale gas and they look good, I wanted the UDR ones to go with the Pr0-Line 1967 Ford F100 body as they are what you see on a lot of the 8100 and & 7100 class vehicles. get the Pro-Line body instead of a clear TRAXXAS UDR body I have one I painted white and got a wrap made a copy of the TOYOTA TRD Ironman Ivan Stewert livery it looks good even found scale side mirrors fitted the TRAXXAS window nets and light kit also, all the Vitavon parts available fitted plus Hot Racing GPM for scale appearance so now have to run it on 6S all the time as the weight plus alloy wheels as spares also so a little sluggish on 4S well was a bit that way out the box. Is yours running 6S still or 8S and a different motor and gearing I cant remember and cant find it in your video collection.