That orange thing might have been a drawing tool called a flexible curve, and they might have edited out the tedious footage of the teacher bending it to the right shape.
I stand with you- once one has done a thing a number of times- it is unlikely that one WOULDN'T know what would happen! Murphy is always there, however...
it's true i think it's less because of a decline in quality and more because they just don't want to make the same thing twice (like reinventing the wheel) there really should be a better way to access documentaries like this
The arch only works this way if the two lower blocks are rigidly connected to each other. In this example with a shelf. Do the same experiment without a shelf, with two separate blocks at the bottom, then the thrust force will push them apart and the arch will collapse. That is why we see in medieval arch architecture, steel cross-connections between the two ends.
A few years ago I was idly thinking about arch bridges and the fact that the Earth's surface beneath the bridge also has a curvature - granted not much, but it's there. So the longer the bridge the more the Earth curves beneath it. Take this thought to its logical conclusion and you have a bridge that goes right round the Earth and needs no supports. It becomes a giant hoop that just holds station. But an observer might look up at it and say "why doesn't it fall down?". Answer: because for that to happen, on the other side of the planet, It would have to fall up!
Vsauce covered this in his video "Which way is down?". Ironically, this bridge would appear extremely uneven and undulating, due to having to match the forces of gravity as well.
@@Renteks- I watched the video now. When you say "extremely uneven" I think this is a huge exaggeration.. Vsauce mentions a figure of "almost 100m", but he doesn't point out that this would be stretched over many hundreds of miles and probably not detectable to the human eye. Apart from that there would be other problems with gravitational perturbations from neighbouring astronomical bodies - i.e. the Moon, the Sun, Jupiter, etc - and hence for these and for other other engineering reasons the only shape to build such a hoop would be circular. But this is all just an academic thought exercise anyway, because according to my estimates there is no building material even remotely close to being able to withstand the colossal circumferential compressive stresses that such a structure would develop. No, not even remotely. Some other engineering trickery would have to be employed. Would be a totally cool thing though.
I have a feeling that if the arch wasn't assembled correctly, it wouldn't take 1kg, so he was more making the comment that he wasn't sure he'd assembled it correctly.
Wow amazing. Imagine a walking bridge built like this, and you can feel it move disconcertingly as you cross it! Only faith in engineering can steel your nerves 😅
Wow. Way better visual than anything i saw at Penn State. I would like to build some larger models. Maybe sandpaper on the surface or magnets to help initial assembly. I wonder if theres some Higher level mechanics like a Lagrangian of the centers of mass and friction at tangent points to help describe the “thrust curves” that develop
If some of the slats are loose between the voussoir and the abutment this would indicate the surfaces are in fact slightly UN-PARALLEL, because clearly it would not be able to be removed ...the lecturer actually confirms some of the slats were loose.
I came here hoping to hear the word “voussoir”. I was not disappointed! (I worked at a Voussoir factory where no-one but a French software engineer called them voussoirs.)
I am not sure if at 2:40 the picture is complete: Aren't there frictional forces at both contact points too? - Intuitively, I would guess the whole arc would not be stable if the surface (of the contact points) would be (ideally) slippery.
I think there are no major frictional forces in this static system. A friction force perpendicular to the thrust line would result in rotation of the block, we can see this when he adds a weight and all the blocks rotate to a new stable position.
@@joshdaly2343 Try to build the arch using slippery soap blocks. I am pretty sure it will not hold. Generally, the two planes defined by two contact points on a block are not parallel, hence the two forces will create an outward (or may be rarely an inward) force expelling the block. Yes, this is countered by the gravity of one block, but I am pretty sure that there are also fricitional forces at each of contact points.
@@sakudoo if the soap blocks had the same shape and density as the wooden blocks in the example, then arranged in the same shape they would still hold the arch. It would be very hard to do not (mainly) because the lack of friction, but the fact that there's only one "thrust" line for a particular arrangement of blocks. That's why the arch changes shape when a weight is added so it reaches its unique thrust line whete there's no friction.
I always wondered how the French word "voussoir" translated in English. I got my answer: it doesn't. Though in French, when it's part of an arc, the proper word is claveau (same etymology as clef, key). Voussoir is normally refering to an element of a vault.
I'm currently on a youtube binge / rabbit hole, but this was very informative and interesting. I've always had an intuitive sense of forces in structures, but seeing the force vectors and the thrust line over a whole arch is very interesting, and kind of makes me want to program a physical simulation to represent different weights and thrust vectors over arches.
Interesting thought, I figure that would mainly force the material to be under constant pressure in thr tops and bottoms, eventually thst would weather away until the forces are more spread out again.
@@GundamReviver my logic was to induce a prestress into the material, and make it more stable. The idea being just the opposite of the convex faces. This would enhance resistance to not only the linear stress, but to lateral and torsion stresses. No swing, no twist, no bounce. Seems to make sense.
@@dangeary2134 nah, but did start out with a degree in engineering stuff 😂 I figure you are correct in that it would have increased regidity since indeed it would be pre stressed, but thst added hardness would Probabaly mean the "points" pushing against each other would get immense force on them and break and crumble quicker. Also it's like nearly afternoon here, haha, welcome to the internet: it's always daytime somewhere.
There are two types of friction. Normal friction requires movement to be occurring which isnt happening in this situation, and then Static friction which resists initial movement between the blocks slipping. Static friction would just resist any slipping and equally cancel it out. While it does technically exist in the model, it doesnt actually have any notable effect and so it can be pretty much ignored for the sake of simplicity. It only really matters if the slipping force is enough to overcome the static friction.
Had same question. I think you could add the friction forces to the three forces they drew, and add more terms to the equilibrium equation. But, those terms will cancel out. The component of gravity perpendicular to the surface equals the normal force they have drawn, and the component of gravity parallel to the surface equals the friction force, neither of which they drew. At both left and right points. So, my guess is that friction is indeed there and critical to the arch. I didn't look it up though, so this might be bogus.
There is. The video is misleading. Any undergrad student should point out that normal force is perpendicular to the contact surface in case 1 where cardboards were used for top bricks. Thus friction force introduced by normal force is used to counter gravity. I was so surprised no one pointed it out.
@@xiaojiang2610how can a normal force, which is perpendicular to the surface, introduce a friction force, which is parallel to the surface? The whole point of arches is that they act in pure compression, hence there is no need for friction force. For the second arch in the video, if there were friction forces, the blocks would rotate (as they do briefly when he adds a weight and they come to equilibrium in a new shape with zero friction forces)
That is the answer for an infinitely flexible member like a cable. But the stiffness necessary to keep an arch from buckling will allow shear and bending forces to develop. This alters the mathematical solution.
Никогда у вас не получиться изготовить в идеале точки соприкосновения, то ,что несут они разные (переходящие) нагрузки_это Да, но приходится вернуться в начало этого предложения
@@gregoryford2532 but why? don't tell me the English people did not have arches until the French came. The word "keystone" is English, so why having a weird French word for the other stones in the arch?
This is ridiculously wrong. If you look at the block at the top left at 2:23 where the contact points are almost "horizontal" there gotta be friction forces intruduced by normal force that counters gravity. I cannot believe this video can be so wrong.
what? You get to choose your classes in college. Why were you taking gender studies classes if you wanted to learn about physics? You arent required to take any of that stuff if you get a major in physics. You can just take physics and math classes and stuff.
@@eragon78 You don't understand. I was in math and physics and art history and science and ALL of my teachers and professors were all going woke and constantly talking about it in class. When it was pride month my art history classroom was adorned rainbow and pictures of gay men kissing and holding hands posted on the walls. I graduated and got the hell out of there.
@@outlawedmedia4336 I feel you're kinda full of shit rn tbh. I was a physics major in a public college only a few years ago, and that kinda stuff never happened even once. They purely just focused on the class. Its not like my school didnt offer weird gender studies classes or whatever, its just that, like all classes, they were completely optional for the majority of majors. Also, why are you taking physics, math, and randomly art history in college? What the hell was your major? lol. No way art history was required, thats definitely an elective class if you took it. So thats kinda on you. Also, pride month and people being gay isnt a "genders studies" class. Gay acceptance and gender studies arent the same thing. People being pro-gay acceptance or whatever isnt them being "woke" or whatever lol. Its not that controversial an issue, people should have a right to be gay. Gender studies is something completely different. But yea, even that stuff, I highly doubt your math and physics class took any part whatsoever in that. I took 4 years of college as a physics major and that kinda stuff literally never once popped up. Even in my philosophy classes which I took on the side as my electives. If the only thing that actually happened was ONE class put up pictures of rainbows and gay couples and THATS what trigged you so hard, it honestly sounds more like you're just being way too sensitive about random stuff. Was the class even teaching anything related to that, or was that just how the teacher felt like decorating their own classroom? If they wanted pictures of rainbows and gay couples, thats their choice. You want to become a professor and decorate your classroom with posters of guns and trucks or straight couples kissing or whatever the hell else you want, then go ahead and become a professor. And again, I doubt your main core STEM classes were even doing that, it sounds like it was just the one random elective class you took. And tbh, what else did you really expect from an art history class lol.
"I don't know if it'll take this" meanwhile having a pre-made piece of plastic perfectly fitting the thrust lines
maybe it would sometimes collapse when he tried it
That orange thing might have been a drawing tool called a flexible curve, and they might have edited out the tedious footage of the teacher bending it to the right shape.
I stand with you- once one has done a thing a number of times- it is unlikely that one WOULDN'T know what would happen! Murphy is always there, however...
@@creamwobbly Who is the bullshitter?
lol
physics has always been my arch enemy, but your videos help me understand much
HAH!! I see what you did there magic man
I was about to be forced into learning arches but I know damn well that I'll probably regret that later. So I replied no
Learning is all about building bridges
Could you say these videos helped you bridge the gap in your understanding?
Probably you had bad teachers, because physics is a VERY interesting topic.
Arches are so neat.
Though the term Voussoir may be just as neat.
Fun hearing them say it over and over lol.
That is amazing. I had no idea arches were that resilient to movement.
Whenever I notice in the thumbnail that the documentary looks old, you know it's going to be good.
it's true
i think it's less because of a decline in quality and more because they just don't want to make the same thing twice (like reinventing the wheel)
there really should be a better way to access documentaries like this
Arches LOVE staying up
it's like their favorite thing to do
The arch only works this way if the two lower blocks are rigidly connected to each other. In this example with a shelf. Do the same experiment without a shelf, with two separate blocks at the bottom, then the thrust force will push them apart and the arch will collapse. That is why we see in medieval arch architecture, steel cross-connections between the two ends.
Not necessarily. If the arch has the shape of an inverted catenary, it won't collapse.
A few years ago I was idly thinking about arch bridges and the fact that the Earth's surface beneath the bridge also has a curvature - granted not much, but it's there. So the longer the bridge the more the Earth curves beneath it. Take this thought to its logical conclusion and you have a bridge that goes right round the Earth and needs no supports. It becomes a giant hoop that just holds station. But an observer might look up at it and say "why doesn't it fall down?". Answer: because for that to happen, on the other side of the planet, It would have to fall up!
You have a second like. I love it
Vsauce covered this in his video "Which way is down?". Ironically, this bridge would appear extremely uneven and undulating, due to having to match the forces of gravity as well.
so, like a ring? a ring across the surface of the earth that acts as a bridge
@@Renteks- I watched the video now. When you say "extremely uneven" I think this is a huge exaggeration.. Vsauce mentions a figure of "almost 100m", but he doesn't point out that this would be stretched over many hundreds of miles and probably not detectable to the human eye. Apart from that there would be other problems with gravitational perturbations from neighbouring astronomical bodies - i.e. the Moon, the Sun, Jupiter, etc - and hence for these and for other other engineering reasons the only shape to build such a hoop would be circular. But this is all just an academic thought exercise anyway, because according to my estimates there is no building material even remotely close to being able to withstand the colossal circumferential compressive stresses that such a structure would develop. No, not even remotely. Some other engineering trickery would have to be employed. Would be a totally cool thing though.
Man this is brilliant.
"There's strength in arches" - Prof. Joe Wilkinson, 2016.
I opened this video with the single intent of making this joke
"Professor"🤣
This gives 2009 weird side of TH-cam at night kinda vibes
He didnt know it could take the 1kg weight at that position but you had a line ready for demonstration xD
I have a feeling that if the arch wasn't assembled correctly, it wouldn't take 1kg, so he was more making the comment that he wasn't sure he'd assembled it correctly.
Awesome video. Thank you.
Everything's in equilibrium until someone karate chops it
Very nice documentary ❤❤🔔👈👌
It's good to see a teacher who can do more than just use chalk on a blackboard.
Given the resources a lot of teachers would do the same
need more of this video!!!!!! don't just wake up the ancient roman in me like that!!!!!
If you look on the web for "The Arch Never Sleeps"...it does exist in its entirety on a university website....Cheers from rainy Sydney Australia
@@Warpedsmac well thank you!!!
Wow amazing. Imagine a walking bridge built like this, and you can feel it move disconcertingly as you cross it! Only faith in engineering can steel your nerves 😅
Hell yeah!
wobbly arch bridge!
in china every bridge is like this.
I wouldn't want to drive over a bridge made of vousoirs.
Just when you think you know an arch...there is an old school video that takes it to a whole other level!
There always also is a little shearing. The wobbly arch could not wobble without.
Wow. Way better visual than anything i saw at Penn State. I would like to build some larger models. Maybe sandpaper on the surface or magnets to help initial assembly. I wonder if theres some Higher level mechanics like a Lagrangian of the centers of mass and friction at tangent points to help describe the “thrust curves” that develop
This is how physics should be taught!
If some of the slats are loose between the voussoir and the abutment this would indicate the surfaces are in fact slightly UN-PARALLEL, because clearly it would not be able to be removed ...the lecturer actually confirms some of the slats were loose.
A very interesting video, where is it from originally?
@@junkbucket50 if you search: The Arch Never Sleeps
Or that the slats were slightly different thicknesses, or slightly out-of-square themselves.
I came here hoping to hear the word “voussoir”. I was not disappointed! (I worked at a Voussoir factory where no-one but a French software engineer called them voussoirs.)
So how did they call them?
They called them “Segments” even though they were more like “annular sectors”
I came to see what the word was because the auto-subtitler gave:
boosts was
vusual
versois
fusoir
vessel
vussoir
vuswa
vusua
vussoir
vusoir
Never heard of Equilibrium before until I saw Oppenheimer. Now I hear it everywhere.
I am not sure if at 2:40 the picture is complete: Aren't there frictional forces at both contact points too? - Intuitively, I would guess the whole arc would not be stable if the surface (of the contact points) would be (ideally) slippery.
I guess it would cause there is a vertical component of normal reaction too on both sides
I think there are no major frictional forces in this static system. A friction force perpendicular to the thrust line would result in rotation of the block, we can see this when he adds a weight and all the blocks rotate to a new stable position.
@@joshdaly2343 Try to build the arch using slippery soap blocks. I am pretty sure it will not hold.
Generally, the two planes defined by two contact points on a block are not parallel, hence the two forces will create an outward (or may be rarely an inward) force expelling the block. Yes, this is countered by the gravity of one block, but I am pretty sure that there are also fricitional forces at each of contact points.
@@sakudoo if the soap blocks had the same shape and density as the wooden blocks in the example, then arranged in the same shape they would still hold the arch. It would be very hard to do not (mainly) because the lack of friction, but the fact that there's only one "thrust" line for a particular arrangement of blocks. That's why the arch changes shape when a weight is added so it reaches its unique thrust line whete there's no friction.
I grinned when I heard a choir at the end of this vid as if I discovered a knowledge hahaha.
This seems to continue to talk about medieval vaulted structures, what's the original film?
"The Arch Never Sleeps" www.open.edu/openlearn/science-maths-technology/mathematics-statistics/the-arch-never-sleeps?trackno=5
@@Warpedsmac Thanks!!!!
@@nicolasramirez3944 Always happy to share resources with other Engineering teachers. Cheers from sunny Australia!
Similar principle to the spine. Nature & humanity finding similar solutions.
That wiggly arch was awesome.
That Jumpscare at the end killed me. i didnt expect it.
Interesting video though
I always wondered how the French word "voussoir" translated in English. I got my answer: it doesn't. Though in French, when it's part of an arc, the proper word is claveau (same etymology as clef, key). Voussoir is normally refering to an element of a vault.
my new favorite word, i never knew existed.
I miss the good old times, when structures worked with compression only, no rebar, no oxidation, perfection.
I am taken back to my physics classes 48 years ago.
Make learning fun and you have a student for life 👍🏻👍🏻
I'm currently on a youtube binge / rabbit hole, but this was very informative and interesting. I've always had an intuitive sense of forces in structures, but seeing the force vectors and the thrust line over a whole arch is very interesting, and kind of makes me want to program a physical simulation to represent different weights and thrust vectors over arches.
most informative youtube bing ever. nice.
Hmmm…
If the voussoir contact faces were slightly concave, and the material slightly compressible, would that make an arch more stable?
Interesting thought, I figure that would mainly force the material to be under constant pressure in thr tops and bottoms, eventually thst would weather away until the forces are more spread out again.
@@GundamReviver my logic was to induce a prestress into the material, and make it more stable.
The idea being just the opposite of the convex faces.
This would enhance resistance to not only the linear stress, but to lateral and torsion stresses.
No swing, no twist, no bounce.
Seems to make sense.
@@GundamReviver you are a college student, up at this hour, aren’t you??
@@dangeary2134 nah, but did start out with a degree in engineering stuff 😂 I figure you are correct in that it would have increased regidity since indeed it would be pre stressed, but thst added hardness would Probabaly mean the "points" pushing against each other would get immense force on them and break and crumble quicker. Also it's like nearly afternoon here, haha, welcome to the internet: it's always daytime somewhere.
In 8 years, this will randomly get 17M views
The only thing I was able to pick up was that one part is called a Vousuoouuoouuoaaar.
Arch jenga seems kinda fun, would be difficult to set up though!
_"The arch Mr Computer.."_
A wise man once said: "There's strength in arches".
All here for the voorswaw, say "Aye"!
Should it be some special changed shape of the surface of the bricks, or I can cut the arbitrary circularity curved surface?
I diеd from the instant transition from science to religion at the end 😅
Very illustrative video. Thank you for sharing!
The critical point is that the summation of the vectors should make up a 0 vector.
Children play with blocks, adults with mathematical formulas.
Very interesting, Is there a complete version of the video?
2:30 shouldn’t there also be friction ? Or do the long blue arrows represent the sum of normal and friction?
There are two types of friction. Normal friction requires movement to be occurring which isnt happening in this situation,
and then Static friction which resists initial movement between the blocks slipping. Static friction would just resist any slipping and equally cancel it out. While it does technically exist in the model, it doesnt actually have any notable effect and so it can be pretty much ignored for the sake of simplicity.
It only really matters if the slipping force is enough to overcome the static friction.
Is there no friction at work parallel to the surface in the arch with strangely shaped blocks?
Had same question. I think you could add the friction forces to the three forces they drew, and add more terms to the equilibrium equation. But, those terms will cancel out. The component of gravity perpendicular to the surface equals the normal force they have drawn, and the component of gravity parallel to the surface equals the friction force, neither of which they drew. At both left and right points. So, my guess is that friction is indeed there and critical to the arch. I didn't look it up though, so this might be bogus.
There is. The video is misleading. Any undergrad student should point out that normal force is perpendicular to the contact surface in case 1 where cardboards were used for top bricks. Thus friction force introduced by normal force is used to counter gravity. I was so surprised no one pointed it out.
@@xiaojiang2610how can a normal force, which is perpendicular to the surface, introduce a friction force, which is parallel to the surface? The whole point of arches is that they act in pure compression, hence there is no need for friction force.
For the second arch in the video, if there were friction forces, the blocks would rotate (as they do briefly when he adds a weight and they come to equilibrium in a new shape with zero friction forces)
very important to know when you laying bricks to make a pizza oven.
I just got here from watching Anime. Now i understand about the devil fruit...
Brilliant video
Why the fuck am I watching this at 2am, I have to get up for work in 4 hours..
At least when you get to work, *_one_* of you will know how arches stay up.
😍😍😍😍 civil engineering
complete documentary?
I feel like I should be able to figure this out, but I can't.
Would it work if the arch parts (in the second one) had frictionless sides?
Ecqalibrium... New words everyday.
No mention of a keystone?
Now I want to play jenga for stonemasons
I thought the forces in an evenly loaded arch followed a catenary (cosh(x)) curve. Isn't that mathematics?
That is the answer for an infinitely flexible member like a cable. But the stiffness necessary to keep an arch from buckling will allow shear and bending forces to develop. This alters the mathematical solution.
Никогда у вас не получиться изготовить в идеале точки соприкосновения, то ,что несут они разные (переходящие) нагрузки_это Да, но приходится вернуться в начало этого предложения
I don't know if it's been asked before, but what is this from?
youtube is weird like this, video came out 2 years ago, most comments are from this week
Polybridge training
Anyone else surprised when one of the students gave a good answer?
My gf forms a perfect ark
It's nice to see that Half-life anouncer still has a job
thanks a lot for item question！
nobody mentioning how he just faded into the ether
3:53 the holy triangle
Friction is also there
Watch a few clips of NL playing poly bridge and I get this recommended
It's an interesting video...if you like architecture and arches....Cheers from Australia.
Does anyone know which university this is ?
What determines the direction of the arrows though?
Interesting
I hated these videos in high school and crave them now
Nice to hear Potater...as I was once one of those high school teachers showing 'em!! Cheers from sunny Australia
Is there any civil engineering faculty or science fac.?
why are they calling the stones with some french word?
@@gregoryford2532 but why?
don't tell me the English people did not have arches until the French came.
The word "keystone" is English, so why having a weird French word for the other stones in the arch?
Does thrust require a change in mass to not equal zero ?
❤❤❤👍👍👍
How we Build an arch under ground? -anwseer fast pleas
Either cut an arch-shaped passage,
or build an arch in a bigger excavated space, and back-fill with concrete.
just like jenga
Full link of video
Basically Jenga
I mean this isn't really surprising at all... you could just have a smaller arch... smaller meaning thinner...
This is ridiculously wrong. If you look at the block at the top left at 2:23 where the contact points are almost "horizontal" there gotta be friction forces intruduced by normal force that counters gravity.
I cannot believe this video can be so wrong.
I use Arch btw
Must have a good line of thrust
I use Arch btw.
So there *is* actually strength in arches?
Joe Wilkinson was right
❤
نسال دكتور وليد ارناؤط
And what did the doctor have to say?
forsen
This is the kind of stuff I wish I learned in college instead of every class being about gender studies.
what? You get to choose your classes in college. Why were you taking gender studies classes if you wanted to learn about physics?
You arent required to take any of that stuff if you get a major in physics. You can just take physics and math classes and stuff.
@@eragon78 You don't understand. I was in math and physics and art history and science and ALL of my teachers and professors were all going woke and constantly talking about it in class. When it was pride month my art history classroom was adorned rainbow and pictures of gay men kissing and holding hands posted on the walls. I graduated and got the hell out of there.
@@outlawedmedia4336 I feel you're kinda full of shit rn tbh.
I was a physics major in a public college only a few years ago, and that kinda stuff never happened even once. They purely just focused on the class.
Its not like my school didnt offer weird gender studies classes or whatever, its just that, like all classes, they were completely optional for the majority of majors.
Also, why are you taking physics, math, and randomly art history in college? What the hell was your major? lol. No way art history was required, thats definitely an elective class if you took it. So thats kinda on you.
Also, pride month and people being gay isnt a "genders studies" class. Gay acceptance and gender studies arent the same thing. People being pro-gay acceptance or whatever isnt them being "woke" or whatever lol. Its not that controversial an issue, people should have a right to be gay. Gender studies is something completely different.
But yea, even that stuff, I highly doubt your math and physics class took any part whatsoever in that. I took 4 years of college as a physics major and that kinda stuff literally never once popped up. Even in my philosophy classes which I took on the side as my electives.
If the only thing that actually happened was ONE class put up pictures of rainbows and gay couples and THATS what trigged you so hard, it honestly sounds more like you're just being way too sensitive about random stuff. Was the class even teaching anything related to that, or was that just how the teacher felt like decorating their own classroom? If they wanted pictures of rainbows and gay couples, thats their choice. You want to become a professor and decorate your classroom with posters of guns and trucks or straight couples kissing or whatever the hell else you want, then go ahead and become a professor. And again, I doubt your main core STEM classes were even doing that, it sounds like it was just the one random elective class you took. And tbh, what else did you really expect from an art history class lol.
thx
Arches makes men hard
curved erection
What about Arch Linux then
I use arch linux btw
I use arch btw