You are most welcome John and great safety tip!! You are entirely correct, you need to remove the negative terminal to ensure safety of you and the vehicle during the repair. I hope you enjoyed the video! Hit subscribe to check out future auto diy videos that I post. Thanks for watching!
That tip on sliding the strap helped a ton. Thanks. Also- watching you “weld” was a great reminder to remove the plastic terminal covers after the battery was secured ;-)
Thanks for the video. Replaced my battery with your help. By any chance do you know the size of the 13mm bolt that holds the battery? I’m missing mine.
Intente usar un destornillador, pequeño, y colóquelo en el gancho que sujeta la campana hacia abajo. Asegúrese de rociarlo con WD40 o PB Blaster antes de hacerlo. Por si acaso hay corrosión en la palanca. Desea que sea lo más fácil posible mover la palanca. Además, asegúrese de tener el destornillador en la palanca y no nada que pueda romperse.
Thanks Zach. Good idea to always remove the negative terminal first before touching the positive with a wrench. Cheers John
You are most welcome John and great safety tip!! You are entirely correct, you need to remove the negative terminal to ensure safety of you and the vehicle during the repair. I hope you enjoyed the video! Hit subscribe to check out future auto diy videos that I post. Thanks for watching!
That tip on sliding the strap helped a ton. Thanks. Also- watching you “weld” was a great reminder to remove the plastic terminal covers after the battery was secured ;-)
I am glad the video helped you a lot Steve! I am also glad you learned from my mistakes so you did not weld it as well LOL
Thx for the instructions...! Came in handy as the battery would not budge until I loosened that 13mm bolt. After that, a cakewalk :)
You are most welcome Rich! I'm glad the video came in handy for you. Great job on saving yourself money!
Thanks for the info broskii
you are most welcome! Thank you for watching!!
thank you
You are most welcome!! Thank you for watching!!
Disconnecting the positive terminal from its daughter cable makes reassembly much easier.
Great tip!! Thank you for adding to the community and thank you for watching Raven!
Thank you for the help! 👍🏾👍🏾
You are most welcome! Im glad you enjoyed the video and found it beneficial
Great video man will try that out today. Did you loose your radio function when you change battery?
No I did not. Check your fuses, also thank you for watching! I'm glad that you enjoyed the video and found it to be beneficial
G'day thx for this I'm fixing my car it is this model but it is luxury
You are most welcome! You got this!
Thanks for the video. Replaced my battery with your help.
By any chance do you know the size of the 13mm bolt that holds the battery? I’m missing mine.
That is the J bolt and it is as long as the battery is tall so seven inches roughly
You're most welcome I'm glad that you enjoyed the video and found it to be beneficial!
Whats the battery group size for that benz
I put the link to the battery in the video description
Cómo puedes abrir el capó del coche del Mercedes ML 320 si se ha roto la palanca esa ha soltado el cable
Intente usar un destornillador, pequeño, y colóquelo en el gancho que sujeta la campana hacia abajo. Asegúrese de rociarlo con WD40 o PB Blaster antes de hacerlo. Por si acaso hay corrosión en la palanca. Desea que sea lo más fácil posible mover la palanca. Además, asegúrese de tener el destornillador en la palanca y no nada que pueda romperse.