I just reinstalled and alternator on my 2012 Toyota Camry on my own I am a 50 year old woman in Salem in Salem Oregon thank you so much for the video and have a great life it works perfect
Thank you for the excellent and precise detailed explanation. The shop wanted to charge me $600-$800 to do this job. In total it cost me around $280 for the alternator I wanted with good warranty (keeping the car). It took me around 50 mins total being super careful with the belt and threadings on the alternator swap. My savings bought many Christmas gifts.
I said screw it and just went ahead with this project. I followed this video pretty much step for step and everything is running great! It may not be that big of an accomplishment for most of you guys but the most I’ve ever changed before was a tire… Thanks for the great video!
TCCN-thanks for the video. I am currently assisting my son with his 2013 Camry alternator replacement, but I am coaching him via Snapchat and we are both watching your video simultaneously. So between your video and me, he is successfully replacing the alternator as we speak. I thought the GoPro angles were perfect for me, as I understand car maintenance a little better. My son; however, needed me to explain some things from your video. All in all, I think your video is top-notch, Sir. Some background on me, I am a retired (29yrs) Army Blackhawk helicopter mechanic. But I firmly believe I get more satisfaction in doing my own car maintenance as opposed to paying someone else.
I changed out my alternator this morning with your help. Thank you so much for making this video. playing your video was just like having you right there at my side, giving me directions. replacing it seem fairly simple, but watching you do it helped with all the questions I would have been googling as I went, and especially not breaking any of the clips, again thank you SOOO MUCH!!! I thank you and my Camry thanks you!!!!!!
Thanks for the video. My alternator went out today and it was making the same whining noise you described. As I get older I despise working on a vehicle now but after I watched your video, I had the alternator out and back in in about 30 minutes. Thank you!
The GoPro view was great because it is the view that the "mechanic" (you) actually sees. Also, you are "sharp" enough to know when an additional or alternate view is necessary to make the video explicitly clear. Thanks for sharing your valuable knowledge with all of us DIYers!
Thank you for the tip about unplugging the alternator to confirm that it is the issue. I did this and confirmed that it was the alternator making the noise. Saved me from just throwing the parts cannon at the issue.
@@driverman9528 After replacing the alternator I am guessing that I could have just possibly replaced the one-way alternator pulley but that required special tools to take off and it cost less to just get a rebuilt alternator.
@@reasonablySmartIdiot The pulley tool I found was $135 not $35. But I admit I didn't search very hard for a cheaper one. RockAuto had a Denso for $140 but I didn't want to deal with a core charge and mailing it back so I got my from Napa and it was on sale so I got it from there.
@@KenDombeck yeah the tool rock auto sells from gates is absurdly priced. It's basically a two stage socket nothing too fancy. OEMtools makes one that can be found for around ~$35 and then you'll always have it anytime a pulley on any alternator on any vehicle you ever have goes bad and you'll only be spending $50 tops of repairs buying pullies instead of alternators. I'm just a big believer in investing in tools. Cost more the first time but then saves you later, and I find it almost always saves me a bit that first time too.
My factory one lasted for 9 hard years of abuse in stop and go traffic and one hour of lunch hour idling every day. I now have the Autozone one. I wish I has seen this video before and gotten the OEM alternator. Now I have the knowledge because of you!
I just want to thank you for this video. Because this alternator was on top I felt confident I could change this out myself. (2012 Camry) I watched this video and it confirmed it. Thank you so much for a great video. My son and I got the job done.
Just wanted to say thanks so very much. Your video was very easy to understand and the details were great. I have very little experience working on vehicle but knocked this job out in around 45 minutes and everything works perfect. Thank you again.
I just replaced mine last weekend. 2012 Camry XLE with 192,000 miles. It was a pretty easy job, but I did have to pry a little to get it off. I checked to make sure the bolts threaded in easily. I also replaced the belt since I was there anyway. I bought a new aftermarket unit. Thanks for the video!
Thank you for posting this video. You just save me a lot of time and headache. I was ready to replace the water pump, I checked with stethoscope the noise was louder near the WP. I watched this video and unplugged the alternator, the noise was gone. Thank you again for sharing this useful video. (I am not a mechanic)
Excellent tips... I guess the point of not disconnecting the battery, and simply wrapping the power lead, is so the computer doesn't loose it's transmission learning data... A really good idea.
@@chevinbarghest8453 I didn’t tap the cables, it was running fine at the bigenin then it seemed like fuel wasn’t reaching the motor, and it turned off. Works when I turn it on and keep it accelerated
Hi, can you please tell me what Fuse it blows? My sister's car wouldn't start so we jumped it, got it home and replaced the battery. Now the car won't stay on unless we hold the gas pedal
Thanks for the video. Saved me alot time and money. Was able to get job done in an hour in 26 degrees. What stuck me was the tensioner. Didn't realize it was a nut that wasn't a nut. Just a nut shaped "knob" you put a wrench on to move the tensioner. I'm dumb. LOL. Sincerely though. Thank you.
I loved the camera angle. I have a 2009 camry with a alternator noise and considering replacing it soon. Thank you so much for the insight. My mechanic wanted $600 plus the cost to replace the belt smh
Good angles and camera placement, and often lighting (on cars, such as underneath) makes a big difference. There is a guy named D3SShooter who does this very well (Belgian guy).. Your explanations are nothing short of superb! Excellent walk-thru.
I have a 2011 camry SE, slightly diffrent configuration, this video helped my change my alternator, luckily my tensioner was very close to my alternator and I was able to use a regular socket wrench
We got it tested and found the alternator has failed and we’re able to easily and competently replace the new one with the help on THIS video! WHAT A GOAT!! Thank you so much for the money you saved us!!
Thanks for the wonderful steps changing this! Hardest thing was un clipping the clip! Took right an hour tops! I put original equipment Toyota Denso alternator back in it!
This video was perfect and well explained. You helped give me the confidence to actually complete this whole job by myself. Much respect!! Thanks again.
Mine is 2011 and I think the alternator finally quit. I’ll have to check it out tomorrow in the light of day and hopefully I can swap it out thanks to this video.
Thanks for the on-the-fly way to diagnose whether the alternator is the source of the whine! Also the tip on taming the tensioner! Greatly appreciated. The GoPro does get a decent view of the action. Thanks again!
Go-pro was good. You do a thorough and easy-paced job, so I see exactly what I would see in a DIY situation. If you feel a shot needs further explanation with a better view, then, by all means, take the time to show that hidden bolt (or what have you). But your videos are great already.
This helped me determine the alternator in my sons Camry was going bad based based on the sound matching this video. The only recommendation I might suggest is a closer view of which bolts your removing.
I have the dreaded 2.4 09 model engine but is making the same whining noise and stops when unplugging that wire like in your video. Just to confirm when this happens the complete alternator needs to be replaced? Not some other general source? (I understand you can’t gurantee or give a def answer as everything is case specific) nor holding your response liable lol just “in general” I love your videos/channel/knowledge on Toyotas. You have saved me numerous trips/fees to the mechanic. BIG FAN!
Before you asked our opinion about the GoPro, I had already planned to comment on how I liked it. The image quality and lighting was excellent for my taste. I agree with my fellow canadian commenter below that keeping the attention of the viewer is challenging yet necessary in this day and age :-)
Stephane L. Thank you Stephane! I value all my viewers opinions and appreciate it! Plan is to keep using the go pro and try different methods with presentation! Thank you again!
Amazing video. Thank you sir... the new alternator didn't slide in easily and it was because the wash wasn't flushed. You pointed out exactly how to fix and we got it in minutes after watching your video. Thank you sir!!
@@TheCarCareNut I'll have to drive from NYC to hand deliver my own. Thanks for all you do. Look forward to the notifications when you post a new video.
Good video, my sister just called and said her car started with a whining noise and the battery light came on, so I suspected the alternator. She was actually on the way to the shop for other items so let's see what they say but if it is, I will change it for her now that I have seen this.
thanks for your nice videos bud, we have a couple of reputable alternator repair shops in the area,buying a new original is verrrrry expensive in canada lol
Great tips, thanks. At about 1:30 into the video to see if the noise stops you remove a "little connector" which I assume is a black plastic to wires off a wiring harness. It does not show well in the video but if the entire plastic is supposed to pull out I cannot budge it on my 2.5L 2012 Camry XLE. I'm getting a howl varying with rpms coming from the alternator area so other than the tensioner I cannot tell what else it could be. After just a few minutes running the alternator body is too hot to touch (in 40 deg F weather) so I'm suspicious it could be the alternator bearing but would like to pull the connector before I spend $250 on a new good quality alternator. I don't want to force it or I may cause more problems. Thanks if you (or others) are monitoring.
Well, the alternator itself is almost $200. I’m gonna go spend an extra 120 bucks to put it in. What’s the difference now I ain’t have to deal dealing with the crap the video is very informational, but it’s very hard when you break the top lobe off the tensioner so now you have to have a special tool to get to the other 14 mm bolt
I just reinstalled and alternator on my 2012 Toyota Camry on my own I am a 50 year old woman in Salem in Salem Oregon thank you so much for the video and have a great life it works perfect
Awesome! I’m glad everything went smoothly.
You are amazing
L
Thank you for the excellent and precise detailed explanation. The shop wanted to charge me $600-$800 to do this job. In total it cost me around $280 for the alternator I wanted with good warranty (keeping the car). It took me around 50 mins total being super careful with the belt and threadings on the alternator swap. My savings bought many Christmas gifts.
I said screw it and just went ahead with this project. I followed this video pretty much step for step and everything is running great! It may not be that big of an accomplishment for most of you guys but the most I’ve ever changed before was a tire… Thanks for the great video!
It is a big accomplishment! Good job! Thank you for watching my channel.
It's a great feeling isn't it! Keep it up!
TCCN-thanks for the video. I am currently assisting my son with his 2013 Camry alternator replacement, but I am coaching him via Snapchat and we are both watching your video simultaneously. So between your video and me, he is successfully replacing the alternator as we speak. I thought the GoPro angles were perfect for me, as I understand car maintenance a little better. My son; however, needed me to explain some things from your video. All in all, I think your video is top-notch, Sir. Some background on me, I am a retired (29yrs) Army Blackhawk helicopter mechanic. But I firmly believe I get more satisfaction in doing my own car maintenance as opposed to paying someone else.
I changed out my alternator this morning with your help. Thank you so much for making this video. playing your video was just like having you right there at my side, giving me directions. replacing it seem fairly simple, but watching you do it helped with all the questions I would have been googling as I went, and especially not breaking any of the clips, again thank you SOOO MUCH!!! I thank you and my Camry thanks you!!!!!!
Thanks my 2010 Camry has that problem now with a whining Alternator great tips. Thanks 😊 for showing me to replace it!
Thanks for the video. My alternator went out today and it was making the same whining noise you described. As I get older I despise working on a vehicle now but after I watched your video, I had the alternator out and back in in about 30 minutes. Thank you!
The GoPro view was great because it is the view that the "mechanic" (you) actually sees. Also, you are "sharp" enough to know when an additional or alternate view is necessary to make the video explicitly clear. Thanks for sharing your valuable knowledge with all of us DIYers!
Thank you for the tip about unplugging the alternator to confirm that it is the issue. I did this and confirmed that it was the alternator making the noise. Saved me from just throwing the parts cannon at the issue.
@@driverman9528 After replacing the alternator I am guessing that I could have just possibly replaced the one-way alternator pulley but that required special tools to take off and it cost less to just get a rebuilt alternator.
@@KenDombeck tool is $35 pulley is $40, how did you find a rebuilt for $75? I have replaced the pulley on mine twice.
@@reasonablySmartIdiot The pulley tool I found was $135 not $35. But I admit I didn't search very hard for a cheaper one. RockAuto had a Denso for $140 but I didn't want to deal with a core charge and mailing it back so I got my from Napa and it was on sale so I got it from there.
@@KenDombeck yeah the tool rock auto sells from gates is absurdly priced. It's basically a two stage socket nothing too fancy. OEMtools makes one that can be found for around ~$35 and then you'll always have it anytime a pulley on any alternator on any vehicle you ever have goes bad and you'll only be spending $50 tops of repairs buying pullies instead of alternators. I'm just a big believer in investing in tools. Cost more the first time but then saves you later, and I find it almost always saves me a bit that first time too.
My factory one lasted for 9 hard years of abuse in stop and go traffic and one hour of lunch hour idling every day. I now have the Autozone one. I wish I has seen this video before and gotten the OEM alternator. Now I have the knowledge because of you!
I'm like, 90% done with this job and installing the new alternator, super jealous of your auto ratchet right now
I just want to thank you for this video. Because this alternator was on top I felt confident I could change this out myself. (2012 Camry) I watched this video and it confirmed it. Thank you so much for a great video. My son and I got the job done.
My 2012 Camry's alternator just went out as well! I want to do this myself but unfitting and re-tensioning the belt gets me a little nervous.
Just wanted to say thanks so very much. Your video was very easy to understand and the details were great. I have very little experience working on vehicle but knocked this job out in around 45 minutes and everything works perfect. Thank you again.
Thank you for sharing your amazing knowledge with people. That is a rare thing these days.
Just awesome as usual!!! Thanks sooooo much. My daughter just had her 09 Camry original alternator changed after 400 000 km. Toyota quality amazes.
2010 camry Before i saw your video i cofirmed it was the alternator but did not know it had a clutch, very good angles and xplanation thks
Where you have been all these years ¿ I’m so happy to see professional mechanic explain in details everything about Toyota.
I just replaced mine last weekend. 2012 Camry XLE with 192,000 miles. It was a pretty easy job, but I did have to pry a little to get it off. I checked to make sure the bolts threaded in easily. I also replaced the belt since I was there anyway. I bought a new aftermarket unit. Thanks for the video!
Bless your soul for sharing your infinite wisdom. I hope you know how much of an impact you make on everyday people's lives like me.
Thank you for posting this video. You just save me a lot of time and headache. I was ready to replace the water pump, I checked with stethoscope the noise was louder near the WP. I watched this video and unplugged the alternator, the noise was gone. Thank you again for sharing this useful video. (I am not a mechanic)
Thanks for your video. I didn't think I could change it, but after watching you, had no problems. Thanks Again.
Excellent tips... I guess the point of not disconnecting the battery, and simply wrapping the power lead, is so the computer doesn't loose it's transmission learning data... A really good idea.
what happens if it does?
@@RealSuperImmmigrant Wife will complain it drives funny ...for a day or two.... and the clock needs resetting... taping the cable avoids that...
@@chevinbarghest8453 I didn’t tap the cables, it was running fine at the bigenin then it seemed like fuel wasn’t reaching the motor, and it turned off. Works when I turn it on and keep it accelerated
@@RealSuperImmmigrant it's shorts the wire to ground and blows the fuse hopefully it doesn't damage anything else
Hi, can you please tell me what Fuse it blows? My sister's car wouldn't start so we jumped it, got it home and replaced the battery. Now the car won't stay on unless we hold the gas pedal
Excellent info/tips/tricks to make the job easy. Getting pin flush for reinstallation of an alternator makes all the difference in the world!
Thanks for the video. Saved me alot time and money. Was able to get job done in an hour in 26 degrees. What stuck me was the tensioner. Didn't realize it was a nut that wasn't a nut. Just a nut shaped "knob" you put a wrench on to move the tensioner. I'm dumb. LOL. Sincerely though. Thank you.
The most informative video on changing an alternator on a toyota. I'll be using this video to guide me while changing mines.
I love the first-person view of this job. This video is awesome and extremely helpful!
Thank you for the video. You did a great job explaining the alternator noise generating problem.
I loved the camera angle. I have a 2009 camry with a alternator noise and considering replacing it soon. Thank you so much for the insight. My mechanic wanted $600 plus the cost to replace the belt smh
Good angles and camera placement, and often lighting (on cars, such as underneath) makes a big difference. There is a guy named D3SShooter who does this very well (Belgian guy).. Your explanations are nothing short of superb! Excellent walk-thru.
A + quality video, sound, angles, and dialog were A + with GoPro Camera. Need more videos with "Toyoda " engine 2AR-FE
You made it easier for the absorber! I'm gonna try mine tomorrow & wish me luck! I ain't forgot to thank you!
Thanks for the video, I just finished changing my 2012 camry alternator with no problem. Keep up the the videos and we'll keep learning together. 👍
I like the POV and I love these DIY videos! I have an '07 Camry and a '15 highlander and I'm a DIYer. Your channel is awesome!
Thanks Mathew!
POV works well for these types of videos. Well done.
I have a 2011 camry SE, slightly diffrent configuration, this video helped my change my alternator, luckily my tensioner was very close to my alternator and I was able to use a regular socket wrench
Thank you for this video. Your steps were perfect!!! All done with my daughter's 2012 Camry!!!
Thank you! I think we’re going to give it a try after we have the alternator tested! You have a new subscriber for sure!
We got it tested and found the alternator has failed and we’re able to easily and competently replace the new one with the help on THIS video! WHAT A GOAT!! Thank you so much for the money you saved us!!
Wonderful instructions. Saved me lots of money for a straight forward fix.
This helped a lot today.. help save me money.. I appreciate the time u took to do this video and explain the details..
The way you explain everything is easy to understand, thank you so much
GoPro is good to be able to see what you're doing while you're working. Good work and thanks for sharing.
Thank you! Merry Christmas!
I just swap my alternator on a Camry 2012 to easy God bless u bro.
Yes, the view and angles were wonderful and gave me more confidence to tackle mines. Thank you and be bless as well sir.
Excellent video! Thank you for taking the time to do it super easy to understand great instruction
Another one of your excellent videos, great work. Stay blessed my friend and keep helping others.
Thanks for the wonderful steps changing this! Hardest thing was un clipping the clip! Took right an hour tops! I put original equipment Toyota Denso alternator back in it!
I love your channel. Thank for sharing your knowledge
Thank you for excellent instrcutions!!! Made the switch today and it well.
I loved the gopro. It helped me diagnose my friend's issue. We had the new alternator in in about 30 minutes.
Thank you for an excellent and well explained video. Mine would have gone better if I had your tools, but I managed fine...Just took longer!
This video was perfect and well explained. You helped give me the confidence to actually complete this whole job by myself. Much respect!! Thanks again.
Excellent work, as always!
Thank you for the video. I was able to install a new alternator fairly quickly and correctly.
Love the video! Subbed. Now I feel confident enough to change the alternator.
Thank you so much!!!!!!!!!!!! I wish you were in my neighborhood to work on my car!
Thank you! This is a whole lot easier than the 4.6l Tundra!
Your video show good and not go fast and makes me dizzy so thumbs up..
Thank you! Saved me time and money just doing it myself
Thanks for making the video. The camera angle was fine.
Mine is 2011 and I think the alternator finally quit. I’ll have to check it out tomorrow in the light of day and hopefully I can swap it out thanks to this video.
That diagnose @ 1:40 is a great tip!!! Thank you.
Go pro is good, just make sure it's angled right otherwise we are watching the ground or the sky. Thank you for another awesome vid
You’re awesome man I appreciate the tutorial. God bless you as well
Awesome video! I have to do this job on a friend's car tomorrow. You helped a ton.
Thanks for the on-the-fly way to diagnose whether the alternator is the source of the whine! Also the tip on taming the tensioner! Greatly appreciated. The GoPro does get a decent view of the action. Thanks again!
Just replaced mine thanks to this video! Thank you so much!🙌🏽
Yes great camera angles thanks for sharing 👍 keep up your good work
This video truly helped me. Downside though is that lower alternator bolt would NOT release for me no matter what and is now stripped.
Go-pro was good. You do a thorough and easy-paced job, so I see exactly what I would see in a DIY situation. If you feel a shot needs further explanation with a better view, then, by all means, take the time to show that hidden bolt (or what have you). But your videos are great already.
Thank you for your feedback Gary! I appreciate it
This helped me determine the alternator in my sons Camry was going bad based based on the sound matching this video. The only recommendation I might suggest is a closer view of which bolts your removing.
You sir are a life saving🙏🙏
You are the best in explaining this..thank you very much.now I can change my own.
I have the dreaded 2.4 09 model engine but is making the same whining noise and stops when unplugging that wire like in your video. Just to confirm when this happens the complete alternator needs to be replaced? Not some other general source? (I understand you can’t gurantee or give a def answer as everything is case specific) nor holding your response liable lol just “in general” I love your videos/channel/knowledge on Toyotas. You have saved me numerous trips/fees to the mechanic. BIG FAN!
Before you asked our opinion about the GoPro, I had already planned to comment on how I liked it. The image quality and lighting was excellent for my taste. I agree with my fellow canadian commenter below that keeping the attention of the viewer is challenging yet necessary in this day and age :-)
Stephane L. Thank you Stephane! I value all my viewers opinions and appreciate it! Plan is to keep using the go pro and try different methods with presentation! Thank you again!
Hey its amazing trick pulling the connector out no one talks about it.. my car just whining recently soon Im gonna check it out the way you did…
The man the myth the legend is back with more quality content :D
Thank you sir!
pro tip : you can watch series at Flixzone. Been using it for watching loads of movies recently.
@Matthias Alonso definitely, been watching on flixzone} for years myself =)
Love your channel and all the valuable information you provide. Saludos, Raúl C Pou
Amazing video. Thank you sir... the new alternator didn't slide in easily and it was because the wash wasn't flushed. You pointed out exactly how to fix and we got it in minutes after watching your video. Thank you sir!!
Did a good job...thanks for the video...Have this job tomorrow and thanks again for the help
Great video. Camera looked great.
Thank you brotha! Helped me a lot today!
awesome video ..The world is really helpfull and you are one of them thank you
the go pro was great but it also helps you to keep both of your hands free to work so it’s a win all around
Great direction, thank you for the video and detailed explanation!
great repair video, thanks
You make it look so easy man!!
Trust me the first time for me years ago wasn’t!
Thank you for the video! I did like the go pro angle!
You made that look so easy a blind man could do it . Now I am going to prove it
Awesome video. It's going to help me a lot.
The go pro is working for you! Need some 2nd generation 4 cylinder 4X4 Tacoma videos.
Thanks! When I get one to work one I definitely film it.
@@TheCarCareNut I'll have to drive from NYC to hand deliver my own. Thanks for all you do. Look forward to the notifications when you post a new video.
Come on over before the coffee gets cold! Thank you!
Good video, my sister just called and said her car started with a whining noise and the battery light came on, so I suspected the alternator. She was actually on the way to the shop for other items so let's see what they say but if it is, I will change it for her now that I have seen this.
outstanding video! Thank you
Thank you very much man!! Great video very detail explanation my alternator was doing the same noise
thanks for your nice videos bud, we have a couple of reputable alternator repair shops in the area,buying a new original is verrrrry expensive in canada lol
I repaired mine for a fraction of the price, and still have a good quality alternator.
Great tips, thanks. At about 1:30 into the video to see if the noise stops you remove a "little connector" which I assume is a black plastic to wires off a wiring harness. It does not show well in the video but if the entire plastic is supposed to pull out I cannot budge it on my 2.5L 2012 Camry XLE. I'm getting a howl varying with rpms coming from the alternator area so other than the tensioner I cannot tell what else it could be. After just a few minutes running the alternator body is too hot to touch (in 40 deg F weather) so I'm suspicious it could be the alternator bearing but would like to pull the connector before I spend $250 on a new good quality alternator. I don't want to force it or I may cause more problems. Thanks if you (or others) are monitoring.
Nice thank you, is there a video for the V6 2GR-FE alternator replacement ?
very comprehensive, great video....
Great clip nice explaination in detail appreciate the help
God bless you my guy!!!
Go pro cam is good. Great step by step with good tips.
Got it done saved a few hundred, an hour well spent.
Well, the alternator itself is almost $200. I’m gonna go spend an extra 120 bucks to put it in. What’s the difference now I ain’t have to deal dealing with the crap the video is very informational, but it’s very hard when you break the top lobe off the tensioner so now you have to have a special tool to get to the other 14 mm bolt