Simple Plasma Ignition - Power Requirements

Different ignition system can handle different capacitance value. If you want bigger spark from this system, you'd better have a powerful ignition system otherwise you'll have problem at high engine load and/or high RPM.
Donation:
paypal.me/okki...
My fullname as on my id card: Joko Ari Moelyo Okki
/ okkimoeljadi
My email address is: [e-mail]

[@satyanarayan4488]

Thank you so much.👍🏻
Love ❤️ from india 🙏🏻

[@OkkiMoeljadi]

You are welcome. Love from Indonesia.

[@leonardoseveriche6121]

Muy bien 👍👍

[@chinmaynanda5746]

Thank u sir 4 this😍😍❤️❤️❤️

[@thepoweroffury3379]

congratulations on your excellent work, would you like to know which country you are from?

[@OkkiMoeljadi]

Thanks. I'm from Indonesia.

[@leonardoseveriche6121]

Muy bien 👍👌👌

[@gregorykusiak5424]

(Wow...I’m first.)
Awesome! This shows that the capacitors need time to charge, and if they’re too big, your alternator won’t be producing enough voltage to do that at higher engine RPM.
Compression- wouldn’t the presence of fuel and the pressure & density of the charge enhance the ability of the spark energy to jump the gap? This test was done at atmospheric pressure - things might likely be different at 8 times that. ...and 500pF might probably prematurely wear your spark plugs.

[@vancheeliu6794]

@Okki Moeljadi The overall power at various capacitance may be lower than 10W which is small but will this less than 10W is an average measurements only.
Are there a local hot spot geographically or in the time domain that will make the coil or the spark gap aging too quickly and prematurely ?

[@hamasgrha4773]

Mas Okki...kalo businya di semprot air efeknya bagaimana?cocok digabungkan dengan cold fog engine

[@OkkiMoeljadi]

Bisa, sudah saya demonstrasikan di video lama saya. Dengan air ledakannya jauh lebih keras.

[@hamasgrha4773]

@@OkkiMoeljadi terima kasih sudah membalas ....Mas kalo di instalasikan di mobil caranya bagaimana?

[@OkkiMoeljadi]

@@hamasgrha4773 th-cam.com/video/IRJUCLUp6-k/w-d-xo.html

[@HooooleBlack]

Om oki yg d pendingin itu mosfet atau transistor, kode nya apa yg d pakai

[@OkkiMoeljadi]

Itu Mosfet IXFK24N100

[@mikewalsh511]

What was the top of the frequency range you were using Okki?

[@OkkiMoeljadi]

Hi Mike. I don't know. I tried to measure it with a tachometer but it somehow doesn't give me the correct reading. According to IC555 formula, it should be around 218 Hz.