DIY River Anchor (like you've never seen before ) .
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- todays DIY is about a new idea for an Anchor that's different than anything I've seen out there
I hope it helps someone and as always I appreciate you watching , and dont forget to subscribe
Check us out on
Facebook
/ 997275703941362
For Fishin N Stuff Gear visit the Link below
www.etsy.com/s...
Keith I’m a fisherman with fresh and saltwater experience. I’m also a metal artist. I have a nice metal shop out back in my Mississippi Delta home. My neighbor and I love your channel. Just built my version of your press break. Bout to do the portable band saw and monster rod holder ones. We have Too end boats and catfish on the Mississippi River. Your videos are awesome, and we love to fabricate in our shops. If you ever want to fish the Mighty Mississippi and enjoy Mississippi Delta culture, give me a shout on metalartmississippi on Facebook. You and I have quite a bit in common. Mainly our fabrication ideas and tools. Peace man! Keep em coming!
I could watch all your videos and learn just about everything I’ll ever need to know how to DIY. You have very informative videos, and you add humor, which it is Awesome too. Keep up the videos.
Thank you Sir
Thank you! Made one out of extra stainless steel I had laying around. Everyone ask me where I got it. I tell them Fishing N Stuff! Keep them videos coming.
Thank you Sir I really appreciate that
Thank you Keith! Just finished mine. I welded the 2.5" square tube on at a diagonal so the weighted side is more likely to grab 2 prongs instead of one.
Safety Note: when melting and pouring lead Make Sure everything is DRY! No moisture! If there is any moisture it will explode lead every where. Great videos.
Very cool
That is an awesome design. I've got a couple Richter anchors that I paid quite a bit for. Your design will work just as good and cost much less. I always enjoy your videos and learn something from each and every one. Keep em coming.
Thank you brother I appreciate it ,
i love the anchor. absolutely love it. once ive convinced my wife to buy the angle grinder. metal saw, drill press and a welder. i can start saving money building my own anchors lol (just kidding). great tutorial. thanks for the video kept me entertained.
I thought you did a terrific job (as you ALWAYS do) with the river anchor vid. I really like your channel and have incorporated many ideas for both my freshwater bassboat and saltwater center console. You have great DIY ideas and, to me, it's alway more fun to fish using gear, devices and tackle that I've made myself (not to mention stretching my fishing dollars). Keep up the great work and here's wishing you solid hooksets!
Thank you Sir , I'm glad you like it and I appreciate you for watching em . I think there's nothing cooler than catching fish on the stuff you made yourself . You be safe out there brother
Those are some great ideas , thanks again ! For letting me know about the other videos !
My anchor let go yesterday and we drifted almost into the swim area so this morning I'm researching anchors. I like this one but also i like your most recent one so i think I will incorporate aspects of both. Rather than center it I might weld the chain connection at the top on the lighter side hanging into the chains intended path. Then I don't need to mark the heavy side. I didn't understand about strapping the chain at the top and attaching securely to the bottom, I'm grateful for the explanation. Anyway this was awesome. I appreciate you. Thank you for sharing your skills knowledge and experience
I like that one too . They all have worked . I think I've made 4 Anchor videos
@@FishinNStuff I'm considering turning a sailboat into a skiff and I think the keel board is filled with lead....have you ever harvested lead from a keel? Just wondering if it's worth trying
@@michaelosmon no I haven't. But it would probably be worth it , lead is getting expensive
Thank's for sharing. I like this anchor a lot better than the other one, great idea ! Keep-um coming, stay safe !!!
That build was a bunch better than the other one , but you know that !!!!
Great Job !!!!!!!
I made one very similar to this, by watching your video. Thank you brother. Tight lines.
Thank you brother , I hit some more ideas for anchors lol . Building the stuff is almost as fun as using it ,,,,,almost
Awesome video!! Another idea for the keeper on the pin is a key ring loop. They won’t come out accidentally and most everyone has several laying around. Thanks for the awesome DIY!!
That would work good
That’s one hell of a idea. I make my own wreck anchors for deep sea and i like the idea of the extra weight. I bend rebar
Rebar works good too
Nailed it. You had me rolling with the ppe 🤣great job👍
Thank you brother 😆
Nice this upload in high definition 1080p very cool 😎
Yep sorry about that screw up I've not made a rookie mistake like that in a year or two lol but I'm sure it'll happen again sooner or later
Watched the original upload and now watching the Re-upload b/c you deserve the views. Keep up the great content!
Thank you brother i appreciate your support buddy
Hell of a finished product. The lead pouring was surprisingly satisfying. That heavy side "bump" (brilliant 😁) The PPE scene 🤣. Wish you'd showed more of it being put together and taken apart. Awesome project
nu Skool Fishing thank you man , did you mean taking the anchor apart
@@FishinNStuff yes, showing it being broken down
what an excellent video, funny too. Thanks much.
Should have used the weld seam in the square pipe as the heavy side. That way it stands out while you build your anchor. When you are ready to finish up the anchor you grind down the weld seam until it disappears. Then paint. Just what I would have done for my own anchor
That's a good idea . I didn't even think about it
Your da man, I’ve put 4 of your DIY’s to good use, an this was one of em, but I definitely 100% like it this way better, now I should be mad at ya cause I gotta do it over again, but I’m definitely not cause I know your gonna pop up wit another DIY that I’m gonna need, your da man brotha, an keep doin your DIY’s an stuff 🤙🏼🤙🏼
Thank you brother , yeah I like this design better too . If for no other reason. I love that it breaks down smaller
Now That Right There, Is Some More Kinda AWESOME!
GREAT job as always brother. Thank you for sharing and keep up the good work.
Thank you man
The DIY-KING 🤴. Another great DIY video, I really enjoy watching what you make. Your projects turn out awesome 👍. If you ever have to mark metal, you can use a punch, and make some dimples too 🧐. Loved the part about your PPE’s too 😷. Hope you and your family stay safe and healthy my friend .
Thank you brother i appreciate that . The PPE part cracked me up too when I was editing it 🤣
Great job Keith. Looking forward to your next video!
Thank you Sir i really appreciate that
U r great...make me laugh...while u expose your brilliant ideas....🤣🤣🤣🤣🤣🤣
Thank you brother , with all this craziness we all need a good laugh
Don't tell me, in Italy se are in quarantine since March 4 and we can't go out of the house, only to buy food, medicines that's it, take care all of you and your entire families...stay safe
@Ermanno Di Benedetto you stay safe to my friend
That was awesome, I only see one mistake.... you put your sticker on the bottom side so it will get all scratched up in the gravel... plus if you put them on the sides the fish will see them and know they are about to get a ride in the boat!
Damn, someone bent the hell outta that anchor! LOL! Nice job on the new model. You keep upping your game. Now I gotta find something to melt lead. Stay safe and keep the videos coming!!
An old bean can on a camp stove will work fine buddy
Now that’s southern... an old bean can 😂😂😂😂. Awesome video my friend
@@psychonursehomestead9680 i know an old man that does it like that lol and it works
How hot would u need to go before the bean can melts
@@stephbhoy1 around 2000 degrees , why are you asking a stupid question on youtube when you could have just googled it yourself?
I would love to meet you in person you are so funny ! And brilliant the way you come at a project from every angle and end up with very fine products made very economicly, I would like to watch and see the true time it takes you to make something like this anchor ! Because this just became my next project and I know exactly how to make it. ...best instructional videos I've ever seen. You seem to think of everything great job!
Thank you very much . It takes a lil longer in real life than it did on the videos lol . I appreciate you watching and the comments just help stoke the fire . I appreciate you brother
Another great one To’day. Keep them coming!
Thank you I appreciate it
Man… Just had to cut off an anchor that got lodged in a tree out on the Saint Croix this weekend. Wish I would've seen this video before I already bought another cast-iron river anchor. Think I might go ahead and build one of these anyways.
Really enjoying ur show,thanks bro.love the wisdom!!!
Thank you very much I appreciate that
I need this. Also need to learn to weld so I can do things like this. Very cool Keith!
Thank you Chad . Welding isn't that hard to learn and its really helpful
Great idea.
Bro, it's scary how we think alike!!😱
POP and I were just talking a few weeks ago about how we could make an anchor that would come apart to store better and VOILA' You post a video for that very reason!!!😂
Great idea and awesome build, brother!!!
Haha great minds 😜 . Yeah I hate not having a place for stuff
neat design i really enjoy your diys. you are funny it makes me laugh and teaches me some great ideas i just dont have the welder but i love it
Thank you brother , i appreciate that and you know you can do anything you put your mind to do
@@FishinNStuff i'm working on it got to get metal wanting to make a rod rack for my basstracker classic i got for christmas tired of reaching down to get rod
Awesome 😁 thanks kinda spent 70 on an old one from a yard sale
Yeah they get pricey don't they
@@FishinNStuff nha cheap I'm from South Africa but would have saved a lot making one
Dat right dare is awesome 🤣 Great idea and a entertaining video as well...
Thank you brother lol . It was funny 🤣
You can tack your part to your table to eliminate grounding problems and clean up the tack when your done welding...
I've done that too I was just showing why I put the ground on the part , because I did it in another video and some ppl said just ground your table . Which is what I always do . But your right I tack parts to the table for better ground and instead of using a clamp sometimes
Great idea! Keep them coming.
Thank you Sir
Awesome build my buddy! You rocked out on this one.
Thank you brother
That is a sweet anchor. Good job.
Thank you brother
Fishin N Stuff you are very welcome brother!
I don't have an anchor compartment, but I do need to figure out how to make my anchor heavier. I was thinking of adding a bigger chain, but I need to take a closer look at it and see if there's a way I can add weight to the anchor itself. It's a nice anchor with the zip tie break-away design, but it breaks loose a lot if the wind gets up on me. You've got enough PPE to outfit and entire hospital. Dang PPE hoarder! 😂
Haha hey you got to stay safe man . I'm always getting comments from the TH-cam PPE Police so I figured they would like that
Don't know how you do it but Damn! Great video. You had me laughing on the PPE part. I'm the same way 😂😉. Thanks 4 sharing 👌👍🎣😎
Thank you brother. I has a ball making the ppe part lol
Love it love it love it. Now that's badd ass. Sorry but it is. And I make fishing weights I've been wanting no roll now that you've made a mold now I can't weld but I'm going to watch I've got to figure me a way cause cost to much to loose and river fishing we loose alot lead so yea I need to be able to make my own thanks bro. God bless
You make really cool anchors. I hard about a box anchor that catfisher use. it would be cool if you built one weld and no weld like you did the river anchor . at last people will know it's built good
That's a good idea
Awesome!
It was great both times.
Thank you brother
Loves it thank you sir
Thank you
That anchor is awesome, but you got rid of the two tines on the "light side" your anchor would definitely be heavier on one side, your chain will be on top and the "top" two tines are not doing anything anyway.
Awesome anchor!!! Now ya just need to do a 26’ deep v all aluminum boat!!!!
😂😂😂😂😁
I'm working on that one haha
Great build Keith. That thing is awesome. I'm pretty sure I liked and commented last night on the video but I don't see it. Anyway thanks for sharing
I had to repost it buddy the quality was messed up
Awesome video bud I will try this for sure
Thank you brother 😊
Awesome content dude I think I have watched 20 videos in past 3 days lol
I really appreciate that
Love your humor. :)
Haha thank you you got too have fun . I appreciate it and thank you for watching
Cool wreck anchor
Looks awsome to me
Thank you brother
Oh man I cannot wait for the pvc version haha, this is my new favourite channel. A think I might just subscribe and click the bell !
Well what you waitin on lol . Seriously I appreciate buddy , Im not sure I can melt lead into PVC lol I might try though
@@FishinNStuff I dont even have a boat 😂 next diy project, ur gonna need a bigger pvc pipe
@@stephbhoy1 lol
great! design! comment 215 showing:
Awesome idea as usual brotha.
Thank you Sir
Awesome video! Thanks
Thank you
Hey you dinged your boat putting it in the locker!!! Maybe it was just paint rubbed off.. :) Nice anchor!!
Ol heck lol I didn't notice 😂 . Thank you brother
@@FishinNStuff I saw the spot :) I had to tell ya... Great video again...
Thank you brother
Really nice anchor build brother but have you considered Standup Comedy? Call it the DIY PPE Prep tour :)
Haha you should consider it too cause that's funny . I appreciate it buddy
Cool anchor man, I'll have to try making one sometime! 😃
Thank you Sir 😊
You should do a anchor build for a pontoon boat
Does a pontoon use a different Anchor ?
@@FishinNStuff the problem I have with mine is it seems not to hold it like it should figured you could come up with something lol thanks for all the videos I really enjoy watching and learning not to mention the laughs keep'em coming
@@429Rob thank you brother i appreciate that , ill most likely make more Anchors but that Anchor really did shock me his good it held my boat . I would bet that it holds as good as 2 15 lb mushroom anchors . Even in the mud it dug in good
That’s awesome... keep up the good content
Thank you brother
Great idea thanks don't know if anyone told you that a #2 pencil is made of graphite you would have just had to color the bolt you cut the threads off of with it just save you a little money next time instead of going to hobby lobby
Didn't think of that , thank you
Sweet. Could paint heavy size different color
Wish I had the equipment and tools to do this I need a good anchor like this one
Would a cotter pin work well if you want a pin that will not come off easily?Just saying.
Great since you built 2 send me one 😆
Haha I need one for the back of my boat haha the other one did so good
Thanks for the safety tutorial. I'm only assuming there was an athletic cup in there somewhere.....
Hahaha I can't show you everything lol
@@FishinNStuff And that is JUST FINE!
Great video brother!
Thank you brother
Awesome build! This will be my next project. Where can I get one of those Katfish shirts?
They have a website i think . I made a best catfish bait video and the funny guy on it that helped me he's the own of the company
NEW SUBSCRIBER
Man you are funny
Thank you Sir 😊
I like it
Thank you brother
Hell yeah! And I subscribed!
Thank you brother and thanks for subscribing too
Why four tines is anchor always falls same way. Get rid of those two upper tines, then it might fit somewhere in the boat better.
That's a good idea man , plus it'll make the heavy side heavier huh
If u made same anchor w/ aluminum only use the thicker wall stuff I wonder what that would weight bc u can always make it heavier w/the chain but trying to make lighter is alot tougher.
I bet lead and Aluminum would make it fall the right way every time .
Where do you source your metal? I live in Shelby
The zip tie can be a dangerous idea.
Could u make one smaller for a kayak? If so what would u charge? And how would I get in touch with u?
I don't sell stuff , I was planning in making a kayak model
The clip you use to attach the chain is going to break. Get a shackles
I put the same one on the first anchor i made and its never broke . Its kind of hard to break a chain link . As long as you know how to weld
What can I use besides the lead? I have the capability to do everything but melt the lead
Well technically lead weights for times what steel weighs that's why I used it . But you could just weld a couple big pieces of rebar to one side of the inside , it won't be as heavy but I think it'll be fine because a lot of ppl use 10 and 12 lb anchors . And water will fit in the bottom part because the lead seals it off but it'll still last a few years if you don't lose it 😉
Fishing nets
TA DAY !!!!
Wear your PPE ppl lmbo
@@FishinNStuff LOL !!!!
I requested to join the group! Same name
I appreciate all your support brother
o some.That is using your hat rack!!!!!!!
Haha that's funny lol
Everyday it’s becoming harder to find scrap lead. Even the tire shops are now paying companies to legally dispose of it.
It does , you have too look around for a scrapyard that sell
You could use concrete...I use concrete to make trot line weights...
Jim, Every once in a while, I've found some scrap lead on Craigslist. Also since CA has banned all lead ammo in the field (for both fur bearers and all birds), I have used unused lead shot that I once reloaded with. Just thinkin out of the box...
look for scrap sailboats some keels are 10+ tonnes of lead and alot of boats get scrapped
@@FishinNStuff I have a friend that owns a premier roofing company. He lets me have all the old scrap lead flashing he removes from old roofs he replaces. What I don't use I give to a friend that is a Striper guide to pour bucktail jig heads. He takes me fishing when he has free time.
Keith, do you sell these anchors to the public....I have a pontoon for fishing and need something like this. Mjborn1956
So did it work? I mean did it land on the heavy side every time?
I have it to a friend . I'm not sure how good it works but he likes it and hasn't lost it lol
On your anchor build what did you use on the press to bend those angles
th-cam.com/video/GpikGDLz9pE/w-d-xo.html
That's something I made last year
Thanks for the link
Hey do you sell these? I want one. For my boat. I would make it myself but have zero tools
No Sir I just Mahe videos and between work and TH-cam I don't have alot of time left over. Look into Never lost Anchors. They are the best deal out there
It doesn’t matter if the flutes are 17 or 18 inches does it
Hi Keith I live down here in Spartanburg and im thinkin bout getting myself a 24ft Pontoon boat and id like to know what size rope to put on it ang how long do i need? im going to start fishing for them big cats and whatever bites. ive been disabled the past 4 years. i guess ill start fishin down at Lake Greenwood when i get able. ive been purchasing all kind of fishin tackle. i still need a couple anchors and rod holders i thought about puttin about 4 rod holders on each corner. Thanks buddy i appreciate all you can tell me. Big Dan
I run a 100 foot rope , ive ran 50 on one anchor , drop the 100 footer first then troll it all out drop the 50 foot anchor . Then pull back 50 foot till its tight . Then you got 50 foot on each side . 3/8s rope or higher should be plenty strong
I’ve been watching All your videos and I’ve bought PVC Pipe and going to make me some jugs and I thought about buying some of Steve Douglas rod holders and anchors and a big net and fix up my boat nice for cat fishin. I love your boat it’s very nice but I’m wanting a big pontoon a fishin pontoon with bout 150 hp so I can get out of peoples way if have too! lol I enjoy watching your TH-cam channel
So your saying put 100ft on the back and 50ft on the front?
@@dannyfoster6794 no drop.the 100 troll up 100 feet till its all out drop the 50 then pull your self back until the 50s tight and and you hit 50 on each side but it depends on how deep the water is where you fish
Fishin N Stuff I really like the Anchor you made the other week. Best looking one I’ve ever seen. I’d love to get you to make me a couple of them and I also like your rod holders also and the thing you put the rod holders on that fits on the corners your very good at your DIY’s
If you don't want it to set upside down why not leave the top tines or spikes off so it can't set the wrong way?
Will this anchor work on a pontoon boat
Im sure it will , the main difference in boats are there weight
I don't sniff paint or cocaine ... I just like the way they smell. lol
Lol
Would two of these hold a 24ft pontoon?
Yes . 2 of them . The Suze I built it . Should hold it easily with the proper amount of rope out
@@FishinNStuff awesome. I appreciate the feedback!!! Now time to do it!!!
Interesting that the thumbnail for this video shows the anchor with the chain on bottom
Is not on the bottom it a little loose . Hanging
Ol by the way the fishin n stuff decal is the bottom . So its on its side . Any wayits a thumbnail picture lol