Thar was fantastic Jordan enjoyed it as good as new clean there are so many that make repairs to there machines and don't paint there is a care about and so much nicer looking I would buy yours before there's shows taken care of and you can catch things faster when clean .
I have about the same but I went with 2F same intake but ported and removed 2 cups of aluminum and opened up central carb area , added a DUI Ignition , copper race wires , 38 progressive two barrel carb from Spector Off-road / Weber copy .. Braided oil lines for new oil filter location and bracket . If you swap bell housing and flywheel for a four speed and tcase it all bolts on . Check door in exhaust manifold they freeze closed or open run large tube 2.5" all the way back and glass pack 24" length quiet but flows good . 19 mpg is easy to achieve if timing and carb is set up properly. Seat of pants prove it . Single locker in rear makes difference too .
@Humble Acres not painted from the factory so it might look a little weird and you have to draw the line somewhere on a project too. Six one way half dozen the other...it looks good.
Holy cow the paint job really does make a difference. It really does make the parts look brand new. Well done Jordan.
Thanks
❤your videos always looking for more👍
....LOOKIN' GOOD, NICE WORK, KEEP SAFE...
Thanks, will do!
Hope you and the family are well and safe --- Bless Y'all --- (Nice haircut !)
Thanks so much
Mantab berbagi ilmu salam sehat darilombok indonesia
Thar was fantastic Jordan enjoyed it as good as new clean there are so many that make repairs to there machines and don't paint there is a care about and so much nicer looking I would buy yours before there's shows taken care of and you can catch things faster when clean .
Glad you enjoyed it thanks!
I have about the same but I went with 2F same intake but ported and removed 2 cups of aluminum and opened up central carb area , added a DUI Ignition , copper race wires , 38 progressive two barrel carb from Spector Off-road / Weber copy .. Braided oil lines for new oil filter location and bracket . If you swap bell housing and flywheel for a four speed and tcase it all bolts on . Check door in exhaust manifold they freeze closed or open run large tube 2.5" all the way back and glass pack 24" length quiet but flows good . 19 mpg is easy to achieve if timing and carb is set up properly. Seat of pants prove it . Single locker in rear makes difference too .
Looking good young man. 👍
Thanks 👍
Coming along nicely!
Thanks!
Looks like it's coming along nicely 👌
Thanks
If you run some grease on the cover it will hold gasket in place
Did you have any issues with exhaust/intake leaks between the block and manifold ?
Jordan what is your source for Toyota OEM gaskets?
Karl
I'd paint the t case. Oil and dirt wash off paint better it seems like
Fair point
@Humble Acres not painted from the factory so it might look a little weird and you have to draw the line somewhere on a project too. Six one way half dozen the other...it looks good.
*promo sm* 😏