I love your 'can do' spirit. Not only creativity but confidence! Thank you for showing that before the advent of science and technology, methods and systems, humankind just go with the flow, using what is available and letting our hands do the teaching. Just so marvellous!
composites specialist ako sa supplier nang chemicals ginamit dito. very knowledgeable ako sa composite chemicals resins and fiber reinforcements. pwede ako mag seminar sa mga gusto for a fee
napakaraming process at napaka busisi ng paggawa grabe super na amaze ako dito lods hopefully magkaroon din ako ng isang katulad nyan na bangka sa ngayon in my dreams na lang muna tayo lods God bless lods thanks for sharing
Great work, loved the video! But, may I suggest wearing at least a dust mask when sanding fiberglass if not a full face respirator to protect your eyes as well? That dust is nasty stuff!
Not bad. Mabilis ang takbo ng bangka. Iba tlaga kapag fiberglass ang body, magaan na at matibay pa. Kaya maganda at mabilis ang takbo ng bangka. Good job!
where can I buy one of these fiber glass banka. What is the price for one same as on the video ? How much with a Honda 16 HP installed ready to go to sea.
Kuya, where the boat drive shaft exits the stern of the boat what type or kind of a bearing did you install? The video just shows fiberglass going over the shaft at that point. I would like to see how that section is built like you show the rest of the boat building process. Nice 👍 beautiful boat!! You're doing great work I like it good luck Brother! 💪💪💪
Bosing, pwd paki detalye size ng boat? Yong lapad ng loob at ilan ba katao pwding sumakay? Ano ano po ang mga gamit at saan po mabibili ang fiber at magkano? Magkano naman po ang nagastos ninyo at ilang araw natapos ang pag gawa? Maramin salamat po bosing.
Maraming salamat sa po sa inyong panonood at supporta mga kuys hindi ko po kayo ma isa isa ng reply sa mga nag tanong diyan visit my social media acount or email add at ang link na ginagamit namin na product nasa description box po ingat po kayo palagi & god bless you always thanks.
Tapus ko video mo KuyaBoyneg isa nanaman itung makabagong idea pra sa mga pinoy,, good work Kapatid nag enjoy din ako na panoorin kc nag babalak din ako gumawa ng Bangka,,kakaiba ito nkita ko,,pangmatagalan gamit sa tubig pro flashtic gamit,,sa probinsya namin gamit ko pag gawa ay flywood kahuy sya,so ito bago
matibay ang fiber glass bangka ..sana magkaroon ako niyan para magamit sa pangingisda...sa mga nakita ko na gawang bngka na fiber glass yan gawa nyo ang palagay ko da best matibay at maganda ..plata porma ng makina ng tubo ng propeller shaft lahat perfect ang pagkakagawa ..nice video from beggining to the end ..nice content boss.
Agree. Dapat mixture then chopped strands then mixture then kevlar or aramid then mixture. And you can add more layers if you like para sobrang tibay. The kevlar is force resistant para matibay. Hindi yan sapat mga bro. Very nice finish though. Just improve durability nlang po. And you can add flotation on both ends para unsinkable tlga. Wag mag shortcut, buhay ng tao nakasalalay jan.
Awesome fiber glass boat building and design. There's never a perfect boat design and there's always room for improvement and additional revision to make it even a better vessel for safety and security for people on board. I have a couple of suggestions for better performance and noise reduction by the engine and the steering control system. The engine seems to be very loud and the rudder control needs improvement for better maneuvering the boat. Number 1: The engine needs a sound barrier to reduce loudness to prevent hearing ear damage. It needs to be covered with a unique design and at the same time, prevents it from overheating. Number 2: The steering control on the boat needs to have like a round steering wheel for better driving control on the rudder. This can be done even on a smaller boat. The big fancy boats have this steering design which can be implemented and smaller vessels like this one you're building. God bless you with His knowledge, wisdom, and understanding. I'll be moving to the Philippines soon and plan to purchase one like this with the design I mentioned here in the comments.
Love the creative skills, also the ability to build on a budget. The resin that the man was soaking the cloth with didn’t look like any resin I have used before I was curious to know what they were using?
Ayos po yan matibay kpag fiberglass po ginamit sigurado matibay at tatagal ng maraming taon. Keep it up po brad. Support here. Thanks for sharing this video
ok naman sya kaya lang direct na siyang ginawa wala ng molde, matipid pero hindi kasing kintab ng may molde. at dapat ginamitan mo rin ng 600 gsm na wooven mat para mas matibay 👍
Galing naman ni kuya sanay pag palain nawa kayo lahat sa inyong mga ginagawa at kong pang negosyo yan ay akoy nakakaseguradong magugustuhan ng costumer..mula dito sa europe spain.god bless us.
Galing nagriresin o nagpafiver din ako kaya lang mga pigurin. Good job kaya lang maraming tumutusok sa katawan yan ganyang trabaho mahirap itulog sa gabi kasi yung maliliit nyang hibla ng fiver sumusoot sa balat...
30 year's kung trabaho yang pagpafiver sa ngayun pahinga na. Nagfiver narin kami ng lantsa nun nirepair namin yung lantsa sa amin. Kaya sa napanood ko gusto ko rin gumawa ng sarili ko.
I support you idol. Watching from Jomalig, Quezon. Sa lahat ng nakakabasa nito. Pasyal namn kayo sa munti kong bahay mga idol. Thank you for sharing this video. 🐟🤗❤
Ang galing kabayan! Dabest, sana magkaron din ako ng ganyang bangka, nag lalaot din po ako kabayan kahoy na bangka gamit ko, at pag lalaot ang content ng vlog ko
@@kuyaboyneg6436 purong fiber po ba yan..o tinapalan nyu lang po yung bangkang nakahati na dalawa ng fiber glass?? Oo yun yung pang...hulma nyo lang??pasagot naman po lods
Sir dto sa masinloc zambales 2 boat na ganyan napotul sa gitna,so d yan effective sa deepsea fishing maporma lng yan pero mahina sa alon..... sorry for comment
SAFETY FIRST boss walang masama mag hanap buhay kailangan nyo rin poh ingatan ang kalusugan nyo para sa inyong pamilya! Fiber matting dikado poh yan toxic lalo n poh yang tinitimpla nyo ma's masama poh ang amoy nyan pag my hardiner! Keep safe boss! Gamit k poh ng face mash, safety goggles at gloves boss!
Hindi ito bash po...pero safety po muna. Sana po ay mask tayo para hindi tayo magkasakit sa darating na panahon. Ang gagaling talaga ng mga pinoy. Proud...
I give it an " A " for lightweight and strength for the resources they have . Quality and safety needs some improvement . Speed test " A + " Lol, looks like they were having a great time out there .
Nakita ko na medyo manipis yon mga sidewall. Pero nagustuhan ko yon idea nya na gamitin ang electrical PVC na pang structure ng bangka at para sa ibabaw ng bangka.....
aq dn gagawa ng pontoon gamit fiber glass, taga boac aq, bili k lng ng iber glass set s lazada, gawa k ng mold o ung shape n susundin mo, tpos search k lng papano cya gawin s youtube.
@@gwynnjason mogpog ako.meron n ako fiberglass bangka.irepair ko lang hinati ko at paluwangin ko ng buka ang kasko.naintay ko laang loan namin s bfar at aumpisahan ko n ito buuin.cawayan ako brod
Wow, no bushing or gasket man lang to keep the water out. Do you think those fiberglass overlay around the holes and shafts can keep the water out? Just wondering, Kuya. Also, try to use engine mounts to minimize engine vibrations.
@@kuyaboyneg6436 sana pinakita mo rin sir. Inspiring video yan sir. Gusto ko na rin gumawa ng bangka o barko. Gumawa na ako ng airplane noon baka madali nalang ang ganyan. Ni rehistro pa ba ninyo yan?
I liked the lamination ... Where you used the tube it was good ... It could be foam there ... It is very good too ... Root lamination ... Congratulations! ... hihihi
Hello po ma'am hindi ko po isa isa ma rplayan yan ma'am dahil sa hina ng internet dito sa amin...nasa description box po yung email ad at Social media acount ko doon ko sila ni rplayan kasi nag e mail at nag message po sila sa akin..Thank you po and god bless you always.
I love your 'can do' spirit. Not only creativity but confidence! Thank you for showing that before the advent of science and technology, methods and systems, humankind just go with the flow, using what is available and letting our hands do the teaching. Just so marvellous!
Truck farm Useonply
I've heard good feedback about the Woodglut plans.
what is the total cost of building fiberglass boat
For Inquiries please send through my email jeffboyneg@gmail.com.thanks
joya boyneg
ang gandanang
gawamong bang
ka
Galing talaga mga pilipino
Napaka husay I'm so proud of all filipino
God bless....
composites specialist ako sa supplier nang chemicals ginamit dito. very knowledgeable ako sa composite chemicals resins and fiber reinforcements. pwede ako mag seminar sa mga gusto for a fee
Hi! I want po. Please email me. carol.ebua11@gmail.com. Planning to make my own fiber glass boat.
Ayos ito ah?..Mukhang ganito mas magandang ipagawa,kasama ang motor.. Migo salamat ☺ God bless 🙏
napakaraming process at napaka busisi ng paggawa grabe super na amaze ako dito lods hopefully magkaroon din ako ng isang katulad nyan na bangka sa ngayon in my dreams na lang muna tayo lods God bless lods thanks for sharing
Great work, loved the video!
But, may I suggest wearing at least a dust mask when sanding fiberglass if not a full face respirator to protect your eyes as well? That dust is nasty stuff!
Thank you.
@@kuyaboyneg6436 boss gdnoon magkano ganyan set up na bangka boss?
Not bad. Mabilis ang takbo ng bangka. Iba tlaga kapag fiberglass ang body, magaan na at matibay pa. Kaya maganda at mabilis ang takbo ng bangka. Good job!
where can I buy one of these fiber glass banka. What is the price for one same as on the video ? How much with a Honda 16 HP installed ready to go to sea.
For more inquiry Just message me in my social media acount Jefferson Mahasol Alfanta & my email ad jeffboyneg@gmail.com.thanks.
Fiberglass boat. Nice.
Kuya, where the boat drive shaft exits the stern of the boat what type or kind of a bearing did you install?
The video just shows fiberglass going over the shaft at that point. I would like to see how that section is built like you show the rest of the boat building process. Nice 👍 beautiful boat!!
You're doing great work I like it good luck Brother! 💪💪💪
Parang walang bearing..bronze lang yata na tube serves as bushing..parang wala din oil seal pra ma prevent ang seawater na papasok sa shaft section..
The shaft has no bearings.he only used brass bushing to the end of the boat.
Pila kha ma gasto ana boss tanan apil ma motor?
Bosing, pwd paki detalye size ng boat? Yong lapad ng loob at ilan ba katao pwding sumakay? Ano ano po ang mga gamit at saan po mabibili ang fiber at magkano? Magkano naman po ang nagastos ninyo at ilang araw natapos ang pag gawa? Maramin salamat po bosing.
@@jefryjonas1978 hindi po makakapasok ang sea water from the pipe brader kase naka taas ang pipe bushing from the sea water to the joint....
San ba pwde maka order ng pang fiber resin
Marami dito sa cebu....Saan ka sa pinas po?
Boss sa northern samar ako bibili ako ng bangka mo magkano po?
Maraming salamat sa po sa inyong panonood at supporta mga kuys hindi ko po kayo ma isa isa ng reply sa mga nag tanong diyan visit my social media acount or email add at ang link na ginagamit namin na product nasa description box po ingat po kayo palagi & god bless you always thanks.
Tapus ko video mo KuyaBoyneg isa nanaman itung makabagong idea pra sa mga pinoy,, good work Kapatid nag enjoy din ako na panoorin kc nag babalak din ako gumawa ng Bangka,,kakaiba ito nkita ko,,pangmatagalan gamit sa tubig pro flashtic gamit,,sa probinsya namin gamit ko pag gawa ay flywood kahuy sya,so ito bago
Magkano po magpa gawa nyan kuyaBoyneg?
Idol magkano kaya bentang bangka yung ganyan fiber glass? Hndi kasama makena.
Boss mga magkano gastos dyn pg gawa?
IIdol ask ko lang po saan po ba makakabili ng fiverglass
matibay ang fiber glass bangka ..sana magkaroon ako niyan para magamit sa pangingisda...sa mga nakita ko na gawang bngka na fiber glass yan gawa nyo ang palagay ko da best matibay at maganda ..plata porma ng makina ng tubo ng propeller shaft lahat perfect ang pagkakagawa ..nice video from beggining to the end ..nice content boss.
Maraming salamat kuys...Malay mo maka pagawa ka ng ganyan soon.
T@@kuyaboyneg6436 Taga Saan pho kayo
Chop strand lang lahat ng fiberglass gamit nyo? Di yan yung tinuturo samin sa fiberglass boat building..
Agree. Dapat mixture then chopped strands then mixture then kevlar or aramid then mixture. And you can add more layers if you like para sobrang tibay. The kevlar is force resistant para matibay. Hindi yan sapat mga bro. Very nice finish though. Just improve durability nlang po. And you can add flotation on both ends para unsinkable tlga. Wag mag shortcut, buhay ng tao nakasalalay jan.
@@caroladtoon8822 hi ms. Carol pwedi makahingi ng link yon gumagawa fiber glass made na banka yon ayon safety standard pagkagawa? Salamat po ng marami
@@caroladtoon8822 hi ms carol san ba pde malaman ung gumagwa ng fiberboat sa safety at stardard tlga ng pgwa ng boat.
Awesome fiber glass boat building and design. There's never a perfect boat design and there's always room for improvement and additional revision to make it even a better vessel for safety and security for people on board. I have a couple of suggestions for better performance and noise reduction by the engine and the steering control system. The engine seems to be very loud and the rudder control needs improvement for better maneuvering the boat. Number 1: The engine needs a sound barrier to reduce loudness to prevent hearing ear damage. It needs to be covered with a unique design and at the same time, prevents it from overheating. Number 2: The steering control on the boat needs to have like a round steering wheel for better driving control on the rudder. This can be done even on a smaller boat. The big fancy boats have this steering design which can be implemented and smaller vessels like this one you're building. God bless you with His knowledge, wisdom, and understanding. I'll be moving to the Philippines soon and plan to purchase one like this with the design I mentioned here in the comments.
Thank you for advice & god bless you too.
Very nice construction! How much the total expenses?
Ang galing at ang ganda lods...salamat sa idea...salamat shoopee...mwahh..now i know kng panu..
Thank you.
Love the creative skills, also the ability to build on a budget. The resin that the man was soaking the cloth with didn’t look like any resin I have used before I was curious to know what they were using?
Thank you po Toner po yon pang color niya.
Ayos po yan matibay kpag fiberglass po ginamit sigurado matibay at tatagal ng maraming taon. Keep it up po brad. Support here. Thanks for sharing this video
Thank you po....oo pang habang buhay na ito.
mag kanu po Kay ang presyo yan pag nag pa gawa?
50k without engine po sir.
I now know 2 words in Tagalog: Bangka and Fiberglass 🤣
Thank you.
Brod, pila ma gasto ana tanan reply pls.
What about balot.
Fiberglass is an english word
You only know 1 tagalog word its bangka...😂😂
ok naman sya kaya lang direct na siyang ginawa wala ng molde, matipid pero hindi kasing kintab ng may molde. at dapat ginamitan mo rin ng 600 gsm na wooven mat para mas matibay 👍
May additional pa yan pvc-pipe lagyan...styro-foam para unsinkable sa dagat.kaibigan....
Salamat kaibigan.
Great work I like your determination keep it up
Galing naman ni kuya sanay pag palain nawa kayo lahat sa inyong mga ginagawa at kong pang negosyo yan ay akoy nakakaseguradong magugustuhan ng costumer..mula dito sa europe spain.god bless us.
Thank you po...Kayo din ingat po palagi diyan.
Galing naman mga kabayan..dia akung full support nimo... amping mo diha good job!! ready for fishing 🎣 na mga kabayan.. good luck..
Nice work mga kabayan, pero mag safety equipment din kayo. I hope its seaworthy. Protect yourself para makagawa pa kayo ng marami.
Thank you po kabayan.
Just see your video, congratulaciones, I'm a Fisher artesanal un Perú south América, keep going to ahead.
Greetings
Jimmy
Kailangang gumamit ng " Industrial Mask ", dili kado sa Baga lalo kung mag grinding or mag liliha. Be safe always.
Thank you po sa advice..Abangan new sa next video namin naka mask na po...
ayos yan idol matibay talaga at maganda pag fiberglass boat..
Salamat sir.
Galing nagriresin o nagpafiver din ako kaya lang mga pigurin. Good job kaya lang maraming tumutusok sa katawan yan ganyang trabaho mahirap itulog sa gabi kasi yung maliliit nyang hibla ng fiver sumusoot sa balat...
Oo nga sir daming mang tusok sa balat kaya mahirap talaga mag gawa ng fiverglass boat.
30 year's kung trabaho yang pagpafiver sa ngayun pahinga na. Nagfiver narin kami ng lantsa nun nirepair namin yung lantsa sa amin. Kaya sa napanood ko gusto ko rin gumawa ng sarili ko.
Pila puy magastos ani, Bai- wa pay labot ang Makina. Materiales lang? Salamat sa upload. Keep it coming, and power on.
Salamat sA PAg share Brod may idea nA akO Sana makagawa den ako pohon watching from Europe anopog pinamungahan cebu godbless brod
Ang galing ni kuya gamit lang ay isang paint brush dikdik lang ng dikdik hangang nabubuo ang banka
Ang mnga nakikita qng gumagawa Ng mga bagay n pweding I share sa iba ay ginagawa.
Thank you.
Ang galing naka fiber glass na, matibay talaga yan.
Thank you.
Ang ni kuya gumawa ng bangka.. Keep safe po, God bless
,,pulido ang pagkagawa,, nakabisita na ako sa bahay mo,,idol,,,,hehehe,watching jeddah ksa,, fiberglass ,,maganda yan,,,,
I support you idol.
Watching from Jomalig, Quezon.
Sa lahat ng nakakabasa nito.
Pasyal namn kayo sa munti kong bahay mga idol.
Thank you for sharing this video.
🐟🤗❤
Mga kuys pasinsya sa mga mute music po kasi na copyright tayo...Salamat sa panonood.
Galing at napakasipag ni kuya gumawa
Ayos Yan boss me natutunan ako sayo.god bless
Thank you.
very nice improve no pa yan para pati philipine military oorder sainu hehehe. proud to be pinoy.
Thank you.
I recommend maggamit Kayo Ng Aluminum Roller para maalis ung mga na trap na hangin para mas matibay.
Haha wala man lang protection mask sir safety first as always.Good luck mukhang matibay nmn ang pagka gwa
Ang galing kabayan! Dabest, sana magkaron din ako ng ganyang bangka, nag lalaot din po ako kabayan kahoy na bangka gamit ko, at pag lalaot ang content ng vlog ko
Ang Lupit nyan bai! Pwede pang karera, pa jacket naman gyud. Thanks and god bless!!!
More power to you..Peace & GodBless...Shout Out naman dyan kabayan from Los Angeles California Master RC-131
Thank you kabayan.
Ok boss, sigurado na 11 taon nyan sa serbisyo.. good job
Thank you boss.
Wow!ayos, ang ganda👍
Thank you po.
@@kuyaboyneg6436 purong fiber po ba yan..o tinapalan nyu lang po yung bangkang nakahati na dalawa ng fiber glass?? Oo yun yung pang...hulma nyo lang??pasagot naman po lods
Sir dto sa masinloc zambales 2 boat na ganyan napotul sa gitna,so d yan effective sa deepsea fishing maporma lng yan pero mahina sa alon..... sorry for comment
Depinde siguro sa pag gawa sir.
SAFETY FIRST boss walang masama mag hanap buhay kailangan nyo rin poh ingatan ang kalusugan nyo para sa inyong pamilya! Fiber matting dikado poh yan toxic lalo n poh yang tinitimpla nyo ma's masama poh ang amoy nyan pag my hardiner! Keep safe boss! Gamit k poh ng face mash, safety goggles at gloves boss!
Salamat sir....sa next video namin coming soon naka safety first na po ingat po palagi & god bless.
@@kuyaboyneg6436 concerne lng poh ako dahil dati ko rin poh trabaho yan at dilikadu sa baga natin! New subscriber boss shout out poh sa next vlog nyo!
@@butchcantara1497 Thank you sir...Noted poh.
Ang bilis ah..good job.ingat palagi
Hindi ito bash po...pero safety po muna. Sana po ay mask tayo para hindi tayo magkasakit sa darating na panahon. Ang gagaling talaga ng mga pinoy. Proud...
Thank you po sa advice ingat po palagi.
I give it an " A " for lightweight and strength for the resources they have . Quality and safety needs some improvement . Speed test " A + " Lol, looks like they were having a great time out there .
Thank you.
Nakita ko na medyo manipis yon mga sidewall. Pero nagustuhan ko yon idea nya na gamitin ang electrical PVC na pang structure ng bangka at para sa ibabaw ng bangka.....
Thank you po sir.
Mantaap... Bagus konten nya. 👍👍👍👍👍
DAMING NAG TATANONG KUNG MAGKANO NAGASTOS WALANG REPLY..PERO PAG FOREIGNERS NAG COMMENT REPLY AGAD...TSK PINOY NGA NAMAN.
Hello po sir nasa description po sir nilagay ko lahat....Salamat po.
Oky parekoy support lang parekoy
Whatching from kuwait shout out, dha boi, taga bulubogan, tajao ako,
Salamat sir cge2x po next video amping always dira...
Very good video!
Salamat😊
Thank you po.
Nindutag lutaw niya oi. Nice one. Amping lang brad.
Salamat po sir.
Ayos idol maganda support ko idol
Thank you.
Nice one KuyaBoyneg.
Kuya boyneg shout out KAJONI TV
Ang husay mo👏👍
Thank you po.
Dapat ung tarik same nlng din ng sa tabang ang hubog para mas lumaro sa alon ung bangka
Thank you po.
maganda pgkadali n kuya galing...
Salamat po.
Galing ah👍
Thank you po.
Dapat minaselya ang boong bangka para mas matibay hindi minaselya
WOOOOW KOSUGA ANA KOL NICE BUILD
Thank you.
this is a great video. Kudos!
Thank you.
Ang galing namn boss...ng pagkakagawa ng bangka... watching from Burias Masbate boss.... padalaw nmn boss ng bahay ko salamat 😊.
ok na para dili na mahurot ang kahoy sa Pinas. tapos tibay pa kaayo 100 times pa katibay sa kahoy,,,
Thank you.
That worked out better than I thought it would...
Thank you po.
Never underestimate Filipinos
Ang ganda ng bamgka bai
Thank you.
Gusto ko kc matuto s pag gawa ng fiberglass n bangka.taga marinduque aq boss.salamat
aq dn gagawa ng pontoon gamit fiber glass, taga boac aq, bili k lng ng iber glass set s lazada, gawa k ng mold o ung shape n susundin mo, tpos search k lng papano cya gawin s youtube.
@@gwynnjason mogpog ako.meron n ako fiberglass bangka.irepair ko lang hinati ko at paluwangin ko ng buka ang kasko.naintay ko laang loan namin s bfar at aumpisahan ko n ito buuin.cawayan ako brod
Ayus idol..nice work new subsriber idol..from Argao cebu,,,,
Ayos pari ah
Nice banka,,good work,,love it
Wala bang wind power. Libre lang at hindi masakit sa tenga.
Magaan lng ba yang bangka nayan boss...ayus Ang galing Ng pagka gawa👍👍👍
Mabigat po sir.
Ayus idol.ang ganda naman..mag kanu kung sakali mag pagawa nyan idol..???
Sir Ang ganda ng pagkagawa
Thank you sir.
Ganda ng pag kagawa ng bangka bagong tambay po
Thank you po.
Wow, no bushing or gasket man lang to keep the water out. Do you think those fiberglass overlay around the holes and shafts can keep the water out? Just wondering, Kuya. Also, try to use engine mounts to minimize engine vibrations.
Actually meron siyang drain for water hindi ko lang napa kita sa video...Anyway thank you po sa suggestion taker always & god bless.
@@kuyaboyneg6436 Water should not get in there if you have well-installed shaft seals or gaskets. So, there’s no need for water drain at all.
@@kuyaboyneg6436 sana pinakita mo rin sir. Inspiring video yan sir. Gusto ko na rin gumawa ng bangka o barko. Gumawa na ako ng airplane noon baka madali nalang ang ganyan. Ni rehistro pa ba ninyo yan?
I liked the lamination ... Where you used the tube it was good ... It could be foam there ... It is very good too ... Root lamination ... Congratulations! ... hihihi
Thank you po.
Bakit walang nagrereply sa mga tanong dito? Importante po yon eh. Ang manood lng ng video ay di sapat....kaya pala may nag thumbs down.
Hello po ma'am hindi ko po isa isa ma rplayan yan ma'am dahil sa hina ng internet dito sa amin...nasa description box po yung email ad at Social media acount ko doon ko sila ni rplayan kasi nag e mail at nag message po sila sa akin..Thank you po and god bless you always.
Sana gawa Tayo Ng maraming nyan at ipadala sa WPS lagyan Ng javelin missile at Gatling gun
Kuyaboyney pa shout out naman jan.dito ako sa palawan.
Very Informative...Thanks
Thank you sir.
Mantap bang. Sukses selalu
Great Idea....
Bro ang ganda
Well done👍. How does this compare to a wooden ply of exact dimensions as far as weight is concerned? 40% lighter?
Nice video bro galing nyo gumawa ng bangka pulido..salamat sa pag share ng video. pki support din ng channel ko.god bless.
Boss 1 layer lng ba yung mat?yung pvc ba binalot din ng mat bago pahiran ng resin?any tips para maiwasan ang bako bako or uneven finish?salamat
Wow, nindot ug maayo kaayo pagkahimo bai! Cheers and tamsak po
Dito na lods support
Idol ang Ganda Ng pag kagawa ninyu,, mga NASA Ilan ang gastos ninyu LAHAT Nyan Idol?
Good job kuyz