Interesting that I have this issue. Why are they saying this is normal. It's not and surely changes the reflection beam. I'm currently asking the seller about this.
@@paolop.4128 the seller was no help. I installed mine and they seem to work ok. If I start getting other drivers complaining I might try to reset the base of the light to the body it appears to be glued together. If the glue will release I can adjust to the proper vertical position. The only thing is you would need a high temp glue or epoxy to set it fixed again.
@@davidmadison1087 watch out some manufacturing for Left Handed Drive or RHD, it's design not to flick causing dangerous to driving come in Opposite direction
Any advice for installing these and fog lights not being functional instead of the fog lights coming on the high beams come on, i know why the truck is doing it but don't know how to resolve the issue if you happen to know, its a 2006 Toyota tundra
Not all dust covers are so shallow. I jave just purchased a pair of N70's & am having real trouble it inserted far enough to be able to turn and lock into place
Question? Ecosport trend had no hole in the dust cover then i will replace soon the stock bulb to led bulb. Necessary to replace also the dust cover or leave it without hole?😊
Hello dear, we recommend that you buy mini H4 LED Bulbs. Then, after installing the LED bulbs, the dust cover can still be covered normally. However, the power of general mini H4 LED bulbs will not be very high (due to heat dissipation considerations). I hope this helps you.
I have this n60, what can I do to adjust it, the person I meet is angry even though I only have low beam, they say it's dazzling, hilux is attached. I hope my question can be answered, thank you.
sa akin linya din tong dalawang gap pero when i try low beam nya mataas sa normal so ginawa ko nag back ako t 2 click backward yon ok nman xa pero, ang tanong ko is kasi bina back ko xa 2 click twist d xa lalawag agad?
That part 5 degree bending is very use full thanks for that no other video teach about this
Interesting that I have this issue. Why are they saying this is normal. It's not and surely changes the reflection beam. I'm currently asking the seller about this.
@@davidmadison1087did they respond to you? I just installed mine and the leds does not face the 9 and 3 o clock mark
Did the seller respond? I have the same exact problem
@@paolop.4128 the seller was no help. I installed mine and they seem to work ok. If I start getting other drivers complaining I might try to reset the base of the light to the body it appears to be glued together. If the glue will release I can adjust to the proper vertical position. The only thing is you would need a high temp glue or epoxy to set it fixed again.
@@davidmadison1087 watch out some manufacturing for Left Handed Drive or RHD, it's design not to flick causing dangerous to driving come in Opposite direction
Aloha from Hawaii! This simple video is the most useful I have seen. Mahalo (Thank You!)
CLEAR AND VERY USEFUL THANKS
Any advice for installing these and fog lights not being functional instead of the fog lights coming on the high beams come on, i know why the truck is doing it but don't know how to resolve the issue if you happen to know, its a 2006 Toyota tundra
This one is for left hand drive right?
Using the high does the low turn off?
Not all dust covers are so shallow. I jave just purchased a pair of N70's & am having real trouble it inserted far enough to be able to turn and lock into place
Question? Ecosport trend had no hole in the dust cover then i will replace soon the stock bulb to led bulb. Necessary to replace also the dust cover or leave it without hole?😊
Hello dear, we recommend that you buy mini H4 LED Bulbs. Then, after installing the LED bulbs, the dust cover can still be covered normally. However, the power of general mini H4 LED bulbs will not be very high (due to heat dissipation considerations). I hope this helps you.
I have this n60, what can I do to adjust it, the person I meet is angry even though I only have low beam, they say it's dazzling, hilux is attached. I hope my question can be answered, thank you.
Adjustment is given behind headlight, search youtube
Hi there, you can adjust the headlight' high and low position. You can check this video:th-cam.com/video/GWvSWBlAwnI/w-d-xo.html
I have that 5 degree both facing the same directions,what am i doing wrong???i have disassembled and reassembled and have the same issue
Same i have this same issue 😕 what to do now
Where are your location from phillipines i need to align my headlight
Sadya po ba sabog ang liwanag sa hiace? Kahit anong adjust po mukha pa din naka highbeam dami nagagalit
Disculpa que precio tienen y si le queda a mi tsuro 2008 gracias
THANKS TUTORIAL
great explanation. thanks
You are welcome!
Saan po to ma bili
Hi there, please search the Brand: "Novsight"
sa akin straight yong cap nya so may liit tilt
sa akin linya din tong dalawang gap pero when i try low beam nya mataas sa normal so ginawa ko nag back ako t
2 click backward yon ok nman xa pero, ang tanong ko is kasi bina back ko xa 2 click twist d xa lalawag agad?
ahh may tilt talaga!! akala ko parehas left side binigay sakin
Lo mejor