Removable thumb holes are one of the great advancements in bowling technology along with balls, synthetic lanes, and Velcro bottom soles. Another benefit of removable thumb holes is they eliminate the need for the pro to custom scrape the thumb hole. That means if you move away you can still use your old pro shop. Your pro can drill and ship you a new ball and when you get it you just screw in the thumb hole. Two years ago in the Summer I did a lot of yard work and was bowling twice a week. That caused my thumb to swell, I couldn't get out of the ball, resulting in poor bowling and a blister. I got my pro to drill me a bigger oval shaped thumb hole and in less than a month got a 300. Eventually my thumb receded back to normal size and I went back to my smaller thumb holes, but the bigger one saved my game for a few months and is in reserve if needed again.
I have used the Vise for several years now, I have not had a failure yet or lost one. Make sure you do your research on how they are installed per the manufacturer and make sure the pro-shop follows the directions. I know locally another pro-shop was doing short cuts and I would hear horror stories from those that used the pro-shop, of them breaking or coming out.
I've never had any issues with my thumb or fingers swelling bowling and that goes for when I'm bowling over 40 games on a weekend. Never had any issues with the consistency of my thumb not feeling the same from ball to ball. My pro-shop always gets my thumb right. Never have to worry about paying that extra cost for removable thumbs. I've also never used tape for that matter either.
Benifits are if own shop and offer ability to throw test balls and use interchangeable thumbs fingers so person get as close as can to see or choose best option
ron, do you know about what issues any or all have over time. i use the Turbo, and after several months the insert loosing up and it will fall out. i have also lost a few and now have an extra 2 spares just in case im at a tournament or in league an the insert comes out in the back of the pit. Some times they cannot find them when they go back to look. Working with my pro shop, i now use tape with my insert to make sure i have a snug fit. any suggestion, do you think any are better than the other? mark
I have used for the longest time the turbo switch grips. I also had the same problem of the thumb loosening over time and falling out and getting lost. To 'fix' this you take a piece of black thumb tape and place it in the ball. You will need to experiment with the tape up or down in the ball (because that came make a difference). To fix this issue altogether, I switched over to vise using their conversion system to convert from turbo to vise and have not had any problems since! Hope this helps.
@@pdbdd thanks for the information, i have 12 balls that i will need to change, what is the typical cost? sounds expensive!!!! you mention a conversion kit, would i purchase and are is this something the proshop would have? thanks
I think the key is proper installation. I have seen all of them work great or mess up and the main issue comes down to either the drill bit or improper installation.
@@marklindsay426 I paid around $15 for the new system per ball(not including a new thumb slug). You would have to talk with your PSO to see if they have the parts for it. One out of three pro shops had the vise system for me. here is a link to the piece you will need if switching from turbo to vise: www.buddiesproshop.com/bowling-accessories/vise-it-transition-sleeve-for-switch-grip-to-it/
I have been using the Vise thumb holes for over a decade in every one of my balls and never had a loosening issue or failure. The reason I initially got them was one time I was bowling and the glued in thumb insert came out as I threw it and I got a gutter costing me the game. I wouldn't tolerate the failures you are describing and recommend changing thumb hole types.
So like with the turbo brand the inner sleeves they come in multiple colors, green, purple, pink, white, etc. What's the difference in the colors besides just the color?
Another great video. I have a request & it maybe hard 2 do but I would like u 2 show how u see ball reaction. U were reviewing 2 motiv balls the other day and you said 1 was much smoother than the other
Ronald Hickland Jr I’m just getting started and my used ball is drilled already for a Vise It thumb change. So you buy the slug and drill out the slug?
Removable thumb holes are one of the great advancements in bowling technology along with balls, synthetic lanes, and Velcro bottom soles. Another benefit of removable thumb holes is they eliminate the need for the pro to custom scrape the thumb hole. That means if you move away you can still use your old pro shop. Your pro can drill and ship you a new ball and when you get it you just screw in the thumb hole.
Two years ago in the Summer I did a lot of yard work and was bowling twice a week. That caused my thumb to swell, I couldn't get out of the ball, resulting in poor bowling and a blister. I got my pro to drill me a bigger oval shaped thumb hole and in less than a month got a 300. Eventually my thumb receded back to normal size and I went back to my smaller thumb holes, but the bigger one saved my game for a few months and is in reserve if needed again.
I have used the Vise for several years now, I have not had a failure yet or lost one. Make sure you do your research on how they are installed per the manufacturer and make sure the pro-shop follows the directions. I know locally another pro-shop was doing short cuts and I would hear horror stories from those that used the pro-shop, of them breaking or coming out.
I've never had any issues with my thumb or fingers swelling bowling and that goes for when I'm bowling over 40 games on a weekend. Never had any issues with the consistency of my thumb not feeling the same from ball to ball. My pro-shop always gets my thumb right. Never have to worry about paying that extra cost for removable thumbs. I've also never used tape for that matter either.
Great and helpful video
Benifits are if own shop and offer ability to throw test balls and use interchangeable thumbs fingers so person get as close as can to see or choose best option
Gotta check out the TWIST by JoPo Grips!
ron, do you know about what issues any or all have over time. i use the Turbo, and after several months the insert loosing up and it will fall out. i have also lost a few and now have an extra 2 spares just in case im at a tournament or in league an the insert comes out in the back of the pit. Some times they cannot find them when they go back to look. Working with my pro shop, i now use tape with my insert to make sure i have a snug fit. any suggestion, do you think any are better than the other? mark
I have used for the longest time the turbo switch grips. I also had the same problem of the thumb loosening over time and falling out and getting lost. To 'fix' this you take a piece of black thumb tape and place it in the ball. You will need to experiment with the tape up or down in the ball (because that came make a difference). To fix this issue altogether, I switched over to vise using their conversion system to convert from turbo to vise and have not had any problems since! Hope this helps.
@@pdbdd thanks for the information, i have 12 balls that i will need to change, what is the typical cost? sounds expensive!!!! you mention a conversion kit, would i purchase and are is this something the proshop would have? thanks
I think the key is proper installation. I have seen all of them work great or mess up and the main issue comes down to either the drill bit or improper installation.
@@marklindsay426 I paid around $15 for the new system per ball(not including a new thumb slug). You would have to talk with your PSO to see if they have the parts for it. One out of three pro shops had the vise system for me. here is a link to the piece you will need if switching from turbo to vise: www.buddiesproshop.com/bowling-accessories/vise-it-transition-sleeve-for-switch-grip-to-it/
I have been using the Vise thumb holes for over a decade in every one of my balls and never had a loosening issue or failure. The reason I initially got them was one time I was bowling and the glued in thumb insert came out as I threw it and I got a gutter costing me the game. I wouldn't tolerate the failures you are describing and recommend changing thumb hole types.
So like with the turbo brand the inner sleeves they come in multiple colors, green, purple, pink, white, etc. What's the difference in the colors besides just the color?
Don't forget about JoPo Grips.
What do you prefer Ron?
These are essential for me now
Dude you have such great content. But hooooly shit spend 100bucks on a mic that doesnt catch the sound of every childs birthday party in the hall
Another great video. I have a request & it maybe hard 2 do but I would like u 2 show how u see ball reaction. U were reviewing 2 motiv balls the other day and you said 1 was much smoother than the other
Watch this video. th-cam.com/video/7eQ5SmudMAg/w-d-xo.html
Question, I see in your demo that the IT has the outer sleeve glued to the inner sleeve, is that something you recommend and what the purpose?
It allows you to only need one outer sleeve instead of one for each ball.
How do you change them?
So I just bought a used bowling ball with a interchangeable thumb hole I use slugs how much will it cost to switch it to that
The Pro Shop will need to plug your ball so the price varies around $20
@@Ctdbowling ok good I was worried it was stuck like that never seen that before I saw this video
@@hersheljones9467 Would be close to the same price to purchase a grip for the hole.
How much weight does that remove compared to the normal thumb?
The vise takes as much ball material as a standard slug
You lose typically about a extra 1/2 a ounce.
Ronald Hickland Jr - extra 1/2 ounce more than a slug?
@@IAmTheEggMan111 correct
Around how much do the interchangeable finger inserts cost
$10 to $20
What was the third brand?
Turbo, Vise, Ultimate are the three discussed in this video.
Where can you buy the Vise It Thumb change?
Any pro shop can get them from a distributor
Ronald Hickland Jr I’m just getting started and my used ball is drilled already for a Vise It thumb change. So you buy the slug and drill out the slug?
@@HONDAracing22hca you can plug it and redrill it or have the shop drill a IT for your thumb and use it
Right, can't find them anywhere online...
Shrinkage is very common
Adam Webb I thought of the Seinfeld episode when he’s freaking out about shrinkage
Interchangeable finger inserts... Don't they get worn out.
videll7kelly they would, but in theory you only need to replace 1 set. I’ve never seen anyone use them though... they seem useless for regular use.