Hi, you have done a very good instructional video. It has all the information I needed, and more, in easy to understand instructions. I looked at a few others prior to watching your video - they were not of the same quality. Well done, and thank you.
as of now, I havent found out how to do that. See when you transmit or receive, you have to click on something so if you transmit from a KN319 to another KN319, what do you click to transmit or to receive?
mine worked for two hours and stayed pluged into the USB port so recharging was not needed. Lights will not appear when turning device back on will not flash red or blue and charging seems not to allow red light or any light to come on. KN319 was using it to allow tv to Bluetooth speaker, sucks for only 2 hours use. Any suggestions?
I have to HIGHLY dispute this. I purchased one. Note that I am not an "audiophile" in any shape or form, so I plugged my Logitech G430 wired heaphones, and connected this KN319 to my Windows PC, and I thought the sound was more than fine... initially. I mainly purchased this KN319 device to convert random headphones easily, so I didnct expect much to begin with. However, I recently purchased KZ EDX Pro X headphones, which prompted me to test them directly plugged into my - this time - phone. I listened to "Uptown Funk" as a test, because it is a decent wide-frequency song, but mainly because I am very familir with how it sounds based on my 5.1 speaker system. Headphones sounded great to my ears. Only when I plugged them into KN319 and connected via BT did I realize just how terrible is the sound produced by this little black box. It almost cuts off all base frequencies, and at best can be used just for vocal/conversational media. Also, there is a consistent noise whenever sound is playing, and it is especially annoying when intermittent short sounds are present (e.g. interface and keyboard beeps and taps). I replicated the same with Logitech G430, and with Windows 10 PC (with both headphones). Honestly, it's terrible. Even worse, we cannot make a statement, and have it stay true, because someone might receive this with a different version of chip, AND/OR firmware, AND/OR PCB, and have it function better, or even worse. Use a pair of decent headphones that you know have a good base freq. response. Listen with them first, then switch to BT and listen for differences.
Bonjour J'aimerais savoir comment marche l'option TX ? Quand je veux écouter le son de ma télé sur mes écouteurs bluetooth.. Je ne sais pas comment procéder ? Je branche le kn319 à la télé via le câble aux têtes rouge et blanc mais que dois je faire après, sur quoi devrais je cliquer ?
Bonjour, si vous voyez la vidéo complète, voici comment utiliser le mode Tx. Vous pouvez également regarder la vidéo en espagnol au cas où la vidéo en anglais ne vous aiderait pas beaucoup. Aqui el video th-cam.com/video/0flTrEMLpEs/w-d-xo.html
Hi, you have done a very good instructional video. It has all the information I needed, and more, in easy to understand instructions. I looked at a few others prior to watching your video - they were not of the same quality. Well done, and thank you.
Glad it was helpful!
A very helpful & informative - easy to understand - tutorial. Thank you so much ! Regards from Sth Australia
Apreciate your appreciation. Haha Thank you
Thank you very much. I found what I was looking for, the simple educational explanation
Glad to be of help
Does it offer stereo or mono audio in transmitter mode?
Very helpful video
It is working on a Bluetooth speaker from tv?
Yes, it will work. It only works with bluetooth audio
Is it possible to trasmitt from one kn319 and receive to another one kn319? Thanks!!!
as of now, I havent found out how to do that. See when you transmit or receive, you have to click on something so if you transmit from a KN319 to another KN319, what do you click to transmit or to receive?
It's provide Stereo sound i mean 3d sound??
mine worked for two hours and stayed pluged into the USB port so recharging was not needed. Lights will not appear when turning device back on will not flash red or blue and charging seems not to allow red light or any light to come on. KN319 was using it to allow tv to Bluetooth speaker, sucks for only 2 hours use. Any suggestions?
You might wannt use the usb cable and connect to a portable battery
@@Sebabs32Unbox mine was plugged into the usb port at the time the unit stopped working , got 2 hours use from mine was new
In tx mode. Can it support 2 headpohones simultaneously?
Havent tried it but...i dont think so as it can connect to only one device at a time
how is the audio quality when transmitting?
Great
Audio quality will depend on your audio file and not the device
@@Sebabs32Unbox I've tried this device to turn my wired headphone into a bluetooth headphone and sound quality was so bad.
I have to HIGHLY dispute this.
I purchased one. Note that I am not an "audiophile" in any shape or form, so I plugged my Logitech G430 wired heaphones, and connected this KN319 to my Windows PC, and I thought the sound was more than fine... initially. I mainly purchased this KN319 device to convert random headphones easily, so I didnct expect much to begin with.
However, I recently purchased KZ EDX Pro X headphones, which prompted me to test them directly plugged into my - this time - phone. I listened to "Uptown Funk" as a test, because it is a decent wide-frequency song, but mainly because I am very familir with how it sounds based on my 5.1 speaker system. Headphones sounded great to my ears. Only when I plugged them into KN319 and connected via BT did I realize just how terrible is the sound produced by this little black box. It almost cuts off all base frequencies, and at best can be used just for vocal/conversational media.
Also, there is a consistent noise whenever sound is playing, and it is especially annoying when intermittent short sounds are present (e.g. interface and keyboard beeps and taps).
I replicated the same with Logitech G430, and with Windows 10 PC (with both headphones).
Honestly, it's terrible. Even worse, we cannot make a statement, and have it stay true, because someone might receive this with a different version of chip, AND/OR firmware, AND/OR PCB, and have it function better, or even worse.
Use a pair of decent headphones that you know have a good base freq. response. Listen with them first, then switch to BT and listen for differences.
Many thanks
Bonjour
J'aimerais savoir comment marche l'option TX ?
Quand je veux écouter le son de ma télé sur mes écouteurs bluetooth.. Je ne sais pas comment procéder ?
Je branche le kn319 à la télé via le câble aux têtes rouge et blanc mais que dois je faire après, sur quoi devrais je cliquer ?
English...sorry
Bonjour, si vous voyez la vidéo complète, voici comment utiliser le mode Tx. Vous pouvez également regarder la vidéo en espagnol au cas où la vidéo en anglais ne vous aiderait pas beaucoup. Aqui el video th-cam.com/video/0flTrEMLpEs/w-d-xo.html